Tender For special Repair To Road In The Premises Of Durga Bn At Gulpur Under Ge 881 Ews
Tender Value
24.23 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
14 days left
EMD
48460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Road In The Premises Of Durga Bn At Gulpur Under Ge 881 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Jul-2026 | Corrigendum No-1 | BOQ | 28-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking up gravelled macadam or bituminous macadam surfaces area not exc. 400 Sqm and depth exc. 50mm but not exc. 100mm deep, complete all as specified & directed. |
| 2 | 75 mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using Granite, trap or basalt and rolled with 10 to 12 tonnes power roller, each layer will be consolidated separately and to required gradient and camber, complete all as specified. |
| 3 | Preparing water bound macadom surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 10 kg per 10 sq metre of road surface Complete all as specified and as directed. |
| 4 | Applying evenly a priming/tack coat with bituminous primer using paving bitumen 5 kg per 5 sqm all as specified and directed. |
| 5 | Bituminous premix semi-dense asphaltic concrete 30 mm consolidated thickness using paving bitumen VG-30 wiith 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete and rolled with 8 to 10 tonne power roller complete all as specified and directed. Note:- (I) In case the binder contents by weight of total mix is less than 5.5% as per per actual design mix, The prices adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 5.5% no prices adjustment shall be made for the same. (II) Job mix formula for Semi Dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE. (iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating workat site. The Hot Mix plant visit has to be organized by Contractor for approval of GE.(iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC. |
| 6 | Providing premix bituminous macadam with 4% bitumen binder by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) (paving bitumen VG-30) by weight of total mix spread, rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed. Note:- (I) In case the binder contents by weight of total mix is less than 4% as per per actual design mix, The prices adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 4% no prices adjustment shall be made for the same. (II) Job mix formula for bituminous macadam shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE.(iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating workat site. The Hot Mix plant visit has to be organized by Contractor for approval of GE.(iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC. |
| 7 | M&L for preparing bituminous surfaces of road and making 2.5mm thick centre lines, stop lines, dashes, arrows etc, and the like not exceeding than 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with specifal applicator machine all as per manufacturer's instruction including cleaning the surface by removing all dirt, dust & all other forein matters, demarcation at site and traffic control, complete all as specified and directed. |
| 8 | Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, including removal of old unservicable complete all as specified and directed |
| 9 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. including removal of old cat eye ,complete all as specified and directed. |
| 10 | Supply & fixing in repair Plastic speed bump standard size , ISI marked, designed so dynamically and compact that it can bear maximum load on it. The body of the speed bump should be made of PE plastic material. Two highly reflective reflector should be moulded in PMMA material are welded with PE based plastic through welding process and then fixed onto speed bump so that dust and water cannot touch reflector's inside and thus it maintain its reflectivity for a long time, complete all as specified and directed. |
| 11 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand ), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required, complete all as specified and directed. |
| 12 | Demolition of cement concrete (Unreinforced), cemented tiles, PCC kerb stone etc of any description and in any position not otherwise specially provided, complete all as specified and directed. |
| 13 | PCC 1:4:8 (nominal mix), type D-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and sub base of floor, complete all as specified & directed. |
| 14 | Material & Labour for heavy duty endura tile, 10 mm thick joint less with grey cement and pigment set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified & directed. |
| 15 | Material & Labour for two coats of synthetic enamel paint over a coat of piming paints plaster coat including preparation of concrete surfaces of any description over 10 cm width or girth not otherwise described, complete all as specified & directed. |
| 16 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 19 of tender doucments. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender