Tender For special Repair Of Bldg No. P-251 (12Xor Md Accn) At Lancer Line-Ii At Army Area Jodhpur Under Ge (Army) No. 01
Tender Value
98 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
13 days left
EMD
1.72 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No. P-251 (12Xor Md Accn) At Lancer Line-Ii At Army Area Jodhpur Under Ge (Army) No. 01
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Jul-2026 | CorrigendumNo.01 | BOQ | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charges. |
| 2 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 3 | All as per item No 2 above but except stone complete all as specified and directed by Engr-in-charges. |
| 4 | M&L for Precast cement concrete solid building blocks 10 cm thick type B1 1:2:4 (using 20mm graded aggregate) set in cement mortar (1:6) complete in walls all as specified and directed by Engr-in-charges. |
| 5 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur type complete all as specified and directed by Engr-in-charges. |
| 6 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-charges. |
| 7 | M&L for 25mm thick cement concrete type B-0 1:2:4 as in subbase of floor tiles (using 12.5 mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-charges. |
| 8 | Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm/ 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 Square Metre but not exceeding 0.38 Square Metre, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 11 | All as per above 10 but as in skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-charges. |
| 12 | Demolition stone/marble slabs of any description or thickness as in floors/ cooking platfoRunning Metre /steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge |
| 13 | Material and Labour for 18-20 mm thick Machine cut Kota stone slab as in flooring, shelves etc mirror polished laid over with and including 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engr-in-charges. |
| 14 | Material and Labour for machine cut kota stone slab as in vertical surfaces, 18-20 mm thick laid over with and including 10 mm thick rendering in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engr-in-charges. |
| 15 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, cooking platforms, steps, jambs,pillars, window cills, shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and directed by Engr-in-charges. |
| 16 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engr-in-charges. |
| 17 | Material and labour High performance ready-mix cement plaster 15mm thick of Grey colour, for exterior, interior wall surfaces and ceiling surfaces of stone masonary/ concrete application using well -graded natural /m-sand with particle size<2.36mm , cement , fibres, integral waterproofing compound & other specialised polymers which provide a smooth, crack and water resistane surface for a durable structure, with following specifications :- with coverage 0.150-0.250Kgs/Sq ft/mm maximum thickness 15 mm in single coat, Pot life- 60 min to 120minDry/Wet denisty - 1600/1900 Kgs/M3, Bond strength >0.45 MPa, Water demand 6.00- 6-5 Ltrs per bag of 40 KgsCompresive Strength - 10-15 MPa @ 28 Days, Setting time Initial-155 Min final 210Min |
| 18 | Racking out joints/pointing to Square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr-in-charges. |
| 19 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 20 | M&L for Applying acrylic wall care putty on internal and external surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed by Engr-in-charges. |
| 21 | M&L for applying three coats of white wash on newly plastered surface of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-charges. |
| 22 | M&L for applying one coats of white wash on old surface of ceiling complete all as specified and directed by Engr-in-charges. |
| 23 | M&L preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed by Engr-in-charges. |
| 24 | M&L for complete removal of existing treatment of distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putti on plastered surface complete all as specified and directed by Engr-in-charges. |
| 25 | M&L for applying two coats of cement based paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk white of serfaces complete all as specified and directed by Engr-in-charges. |
| 26 | M&L for applying two coat of cement based paint on old surfaces of wall including preparation complete all as specified and directed by Engr-in-charges. |
| 27 | Taking down chowkhats or frames with shutters of PVC door , wooden window , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 Square Metre each complete all as specified and as directed by Engineer-in- charge. |
| 28 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 Square Metre but not exceeding 4.00 Square Metre each complete all as specified and as directed by Engineer-in- charge. |
| 29 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx85mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /Cubic Metre and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N / mm2 modulus of elasticity 900 N/mm2 and resisitence to spread of flame of class A category with property of being termite / borer proof, water/mositure proof and fire retardant and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and directed by Engr-in-charges. |
| 30 | dItto all as per item No 29 above but size of frame 50x125mm complete all as specified and directed by Engr-in-charges. |
| 31 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and natural fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms) having minimum density of 650 kg /Cubic Metre and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /mm2 and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moisture proof and fire retardant and fixing with SS butt hinges of required size and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle complete all as specified and directed by Engr-in-charges. |
| 32 | S&F Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being termite / Borer / Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed screws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For Internal/Balcony/Main Doors. Note :- including 3 Nos for each door Stainless steel 100mm long but hings with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01nos of helical door spring of 300 mm legth. Please Enable Macros to View BoQ information |
| 33 | S&F Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being termite / Borer / Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed screws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For Internal/Balcony/Main Doors. Note :- including 3 Nos for each door Stainless steel 100mm long but hings with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01nos of helical door spring of 300 mm legth. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender