Tender For Provn Of Toilet Near Bldg. No At-5 & At-8 Of 58 Gtc, Provn Of Orthopantomogram (Opg) Machine Room Mdc Happy Valley Shillong, Provn Of Shed In Offrs Mess Lawn Of 58 Gtc, Provn Of 05 X Bus Stand Near Md Accn At 58 Gtc And Provn Of Tilling In
Tender Value
39.76 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
16 days left
EMD
79600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Near Bldg. No At-5 & At-8 Of 58 Gtc, Provn Of Orthopantomogram (Opg) Machine Room Mdc Happy Valley Shillong, Provn Of Shed In Offrs Mess Lawn Of 58 Gtc, Provn Of 05 X Bus Stand Near Md Accn At 58 Gtc And Provn Of Tilling In Lieu Of Wooden Flooring In Single Jcos Accn Bldg. No A-77 Of Signal Unit Happy Valley Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 2 | M&L for Hard core, broken stone /boulders to gauge n exc 63 mm size , deposited , spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 3 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.50 M above the starting point complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed. |
| 5 | M&L for PCC 1:4:8 Mix, type D-2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed. |
| 6 | M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone agg) as in hardstanding /path / plinth prottection incl finishing even & smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for Non-skid ceramic coloured tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and directed. |
| 8 | M & L for glazed ceramic coloured tiles 450X 300X 7mm thick as in vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces complete all as specified and directed. |
| 9 | M&L for RCC precast cover slab using cement concrete 1:2:4 Mix, type B1 (using 20mm graded crushed stone aggregate) set in CM (1:6) including necessary form work complete all as specified and directed.Note: Reinforcement shall be measured separately. |
| 10 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape etc as required and binding with and including MS wire (annealed) not les than 0.9 mm dia as in reinforcement complete all as specified and directed. |
| 11 | S & F 500 litres capacity double layer, rotational moulded, polyethylene (white colour), tripple layer water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white, hoisted and fixed on roof in position, including all fittings such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and directed. |
| 12 | M& L for RCC, 1:2:4 Mix, Type B1 (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all specified and directed. |
| 13 | M& L for Reinforcement cement concrete (Nominal mix) 1:2:4 Mix, Type B1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all specified and directed. |
| 14 | M& L for Reinforcement cement concrete (Nominal mix) 1:2:4 Mix, Type B1,(using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts, complete all specified and directed. |
| 15 | M& L for Reinforcement cement concrete (Nominal mix) 1:2:4 Mix, Type B1(using 20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all specified and directed. |
| 16 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete flat complete all as specified and directed. |
| 17 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), fair finished surfaces of concrete flat complete all as specified and directed. |
| 18 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finished surfaces of concrete flat complete all as specified and directed. |
| 19 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions squre, rectangular or polygonal fair finished surfaces of concrete flat complete all as specified and directed. |
| 20 | M & L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in and setting in cement mortar 1:6 complete all as specified and directed. |
| 21 | M&L for salt glazed stone ware drain pipes 150 mm bore grade ‘A’ laid in trenches and jointed in cement mortar (1:1) including cement concrete (1:4:8) type D-2 (using 40 mm grade stone aggrete) as in concrete bed to drain pipes, packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed. |
| 22 | M&L for rendering in two layers on fair faces of brick or concrete surfaces, 10 mm thick in cement mortar 1:6 as backing coat and 5 mm thick in CM 1:4 as finishing coat mixed with water proofing compound as per manufacturers instructions, finishing the surface even and smooth without using extra cement complete all as specified and directed.Note:- WPC will be measured & Paid separately under respective item of BOQ. |
| 23 | M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed. |
| 24 | M & L for rendering 05 mm thick in CM 1:3 on ceiling surfaces of cement concrete and finished the surface even and smooth without using extra cement complete all as specified & directed . |
| 25 | Supply only for water proofing compound (Powder) complete all as specified and directed. |
| 26 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 27 | S&F in repair Viterous China squatting pan of pattern Orissa pattern of size 580X440mm white with PVC 'P' or 'S' trap, front or back inlet but excluding flushing cistern and flush pipe inluding in position in floor and embedded in cushion of PCC type E2, 1:5:10 Mix, using 40mm graded crushed stone aggregates), and finishing the top surfaces to match with the existing flooring as in repairs (bore 110mm) complete all as specified and directed. |
| 28 | Supply and fixing 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 29 | S & F PVC low level white flushing cistern 9/10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle, 32 mm dia PVC flush pipe of suitable length and making all connection and making good disturbed surface complete all as specified and directed. |
| 30 | S & F 600 mm long PVC flexible Waste pipe to WHB/urinals/Sink complete all as specified and directed. |
| 31 | S & F Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32 mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450 mm length with PTMT nuts, complete all as specified and as directed. |
| 32 | Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed. |
| 33 | Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed. |
| 34 | M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed.. |
| 35 | Supply and fix 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 36 | S&F CP bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. |
| 37 | S&F 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. . |
| 38 | S & F 15 mm bore CP fancy type 2 in 1 bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 39 | Supply and fixing of Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe complete all as specified and directed. |
| 40 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and directed. |
| 41 | S&F brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed. |
| 42 | S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. |
| 43 | S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. |
| 44 | S&F PVC (SWR) bend with access door of 110mm bore complete all as specified and directed. |
| 45 | S&F PVC (SWR) bend with access door of 75mm bore complete all as specified and directed. |
| 46 | S&F in repair PVC (SWR) vent cowl 75mm dia complete all as specified and directed. |
| 47 | S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F for 20mm dia Ball cock valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 49 | S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 50 | S&F for Grating doom 100 mm dia of PTMT (minimum weight 25gms) complete all as specified and directed. |
| 51 | S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and directed. |
| 52 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 53 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour(colour will be approved by Engineer-In-Charge) PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as per specifications & drawings. |
| 54 | Supply and fixing 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 55 | Supply and fixing 2nd class HW 35mm thick plain, framed, panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. |
| 56 | S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 57 | Supply and fixing 100mm size mild steel butt hinges cold rolled medium weight, ISI marked complete all as specified and directed. |
| 58 | Supply and fixing 200mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed. |
| 59 | Supply and fixing 150mm size MS pressed handle, oval type, stove enameled black complete all as specified and directed. |
| 60 | Supply and fixing 250mm long MS sliding door bolt, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of siz bolt & nuts four on bolt & two on staple,ISI marked, complete all as specified and directed. |
| 61 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 62 | M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint (white or tinted) over priming coat on exterior wall complete all as specified and directed. |
| 63 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 64 | S&F Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed. |
| 65 | Supply and fixing Flush shutters, solid core construction 35 mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed. |
| 66 | Supply and fixing of lead sheet of 3mm thick for radiation protection embedded in flush door/plywood with use of adhesive or welding in doors all as specified and directed |
| 67 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:-(i) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished even and smooth without using extra cement. (Note: WPC shall be measured and paid for under separate items)(ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.(iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(iv) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm. |
| 68 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 69 | M & L for PCC 1:3:6 Mix, Type C2 (Using 20mm graded crushed stone aggregate) as in fixing of RCC/PCC/steel post or similar type of works etc complete all as specified and directed. |
| 70 | S & F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, square/rectangular/circular channel or flat sections) including distance pieces, vertical post/column, cleats etc of Fe 410-W (GdeE- 250) quality A complete all as specified and as specified and directed. |
| 71 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 72 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 73 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 74 | S & F for Mild Steel Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases,splices, angle brackets, cleats and other connections complete all as specified and directed. |
| 75 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 76 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:4 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. |
| 77 | M&L for Precast PCC 1:3:6 Mix, type C1 (using 20mm graded crushed stone aggregate) as in solid block masonry exc 10cm in width or girth and setting CM (1:6) complete all as specified and directed. |
| 78 | M&L for 15mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed. |
| 79 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 80 | Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed. |
| 81 | M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 82 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.5 mm graded aggregate) as in levelling coarse of tile flooring etc complete all as specified and directed. |
| 83 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed. |
| 84 | M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and directed. |
| 85 | Complete removal existing treatment of wall and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and directed. |
| 86 | Demolition of Precast cement concrete block walling in any position, complete all as specified and directed. |
| 87 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 88 | Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed. |
| 89 | Refixing of Shutters of any description exc 1 sq. m n exc each Sqm each all as specified and directed |
| 90 | S&F MS flat iron such as small articles for hold fast and similar work all as specified and directed. |
| 91 | M&L PCC (1:2:4) type B1 (20mm graded Aggregate) for fixing hold fast complete all as specified and directed. |
| 92 | Supply and fixing 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete nall as specified and directed. |
| 93 | Supply and fixing 150 mm size Aluminium anodised barrel tower bolt complete all as specified and directed. |
| 94 | S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 95 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed |
| 96 | S&F 18/19 mm thick block boards grade 1 quality exterior grade commercial type, fixed with screws to timber frame complete all as specified and directed. |
| 97 | S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed. |
| 98 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section of unframed work complete all as specified and directed. |
| 99 | M&L for 2nd class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc 6 sq cm n exc 13 sq cm complete all as specified and directed. |
| 100 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and directed |
| 101 | S&F 75mm Brass handles, cast type, polished bright all as specified and directed |
| 102 | S & F 30 mm brass Continuous (piano) hinges, bright finish or electro galvanised all as specified and directed |
| 103 | Material and labour concealed point wiring for one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC conduit and fittings of medium grade, including pressed steel / PVC terminal switch boxes fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. |
| 104 | All as per item No.103 above but 5 Amp socket on same board with other switches complete all as specified and directed. |
| 105 | All as per item No.103 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed. |
| 106 | Material and labour point wiring for power point controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm width or higher size PVC conduit and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. |
| 107 | Material and labour point wiring for power point controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm width or higher size PVC conduit and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. |
| 108 | Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, complete all as specified and directed. |
| 109 | Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. |
| 110 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. |
| 111 | Supply and fixing modular switch 16A 1 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. |
| 112 | S & F Modular cover plate with frame & flush box of 6 modules, complete all as specified and directed. |
| 113 | S & F Modular cover plate with frame& flush box of 3 modules, complete all as specified and as directed. |
| 114 | S & F Modular cover plate with frame & flush box of 2 modules, complete all as specified and as directed. |
| 115 | Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed. |
| 116 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 117 | S & F Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed. |
| 118 | Supply & fix ceiling rose surface bakelite 65 mm x 50 mm three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed. |
| 119 | Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 4 ways with mounting fitted with 200A busbar bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. |
| 120 | Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessary connection complete all as specified and directed. |
| 121 | Supply and fix MCB SPN 40 - 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. |
| 122 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 25x4mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. |
| 123 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 124 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles , including necessary form work finishing even and smooth without using extra cement, complete all as specified and directed. |
| 125 | Supply and fixing/laying 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed. |
| 126 | Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete as specified and as directed. Note :- Only punned down sand shall be measured. |
| 127 | M&L for burnt clay class B bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed. |
| 128 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed. |
| 129 | Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified. |
| 130 | Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified. |
| 131 | Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed. (For Same Board only) |
| 132 | Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified. |
| 133 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. |
| 134 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed |
| 135 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core |
| 136 | S & F Wall bracket decorative LED light Light fitting with lamp 10 Watt Decorative type with Matt Gold finish with Borosil Glass Type suitable for 9W complete with necessary connection including taking down old unserviceable one complete all as specified and directed. |
| 137 | S & F wall hanging light with warm colour 9 Watt lamp , with complete all as specified and directed. |
| 138 | S & F LED surface/recess round light warm type 15 W including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 139 | S & F warm colour strip light with driver and connection complete all as specified and directed . |
| 140 | Supply and fix RCBO with earth leakage, over load and short circuit proptection, DP, 240 Volts, 32 Amps, 30 mA senstivity complete all as specified and directed including taking down old one complete all as specified and directed. |
| 141 | M & L Sub main wiring with two run single core 2.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm casing caping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion complete all as specified and directed.Note: (i) Two runs of 2.5 sqmm and one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one RM. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender