Tender For Repair & Maintenance Of Misc B/R Assets Except Sewage System Falling Under Prothrapur, Garacharma, Lambaline & Brookshabad Under Ge Brichgunj, Sri Vijaya Puram
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
7 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Misc B/R Assets Except Sewage System Falling Under Prothrapur, Garacharma, Lambaline & Brookshabad Under Ge Brichgunj, Sri Vijaya Puram
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Jul-2026 | Date Corrigendum | Date | 08-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of fencing wire mesh any size and description complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and as directed. |
| 3 | Dismantling of posts or struts (wood, steel or RCC) of any section along with old, unserviceable barbed wire, if any, including taking out embedded portion from ground and making good disturbed ground complete all as specified and as directed. |
| 4 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed. |
| 5 | M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 6 | Supply only PVC coated 1mm thick chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm complete all as specified and as directed. |
| 7 | Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately) all as specified and as directed. |
| 8 | Supply only 6mm dia wire PVC coated for support/line wire to chain link fencing complete all as specified and as directed. |
| 9 | S&F in Repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (Each line wire to be measured). |
| 10 | M&L for Mild steel angles, bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 11 | S&F Mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed. |
| 12 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed. |
| 13 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 14 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410W(GdeE-250) quality B all as specified and as directed. |
| 15 | S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed. |
| 16 | S & F plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with attachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed. |
| 17 | M&L for preparation new steel surfaces of any description exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 18 | M&L for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 19 | M&L for preperation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 20 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and as directed. |
| 21 | S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 23 | S&F Plain Aluminium sheeting 0.56mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 24 | S&F Polycarbonate sheet 6mm thick, fixed with aluminium strips and coach screw and washer in roof wall etc and filling gaps with silicon complete all as specified and as directed. |
| 25 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 26 | M&L for Cement concrete, 75mm thick, type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring/hard standing,Path way complete all as specified and as directed. |
| 27 | M&L for Cement concrete, 25 mm thick, type B1,1:2:4 (using 20mm graded stone aggregate) finishing the surface even and fair complete all as specified and as directed. |
| 28 | Dismantling of floor, or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed. |
| 29 | M&L for Chequerred cement concrete tiles 300x300x25mm thick size set, jointed and pointed in neat cement slurry incl 15mm thick in CM 1:6 bedding layer of mortar complete all as specified and as directed. |
| 30 | M&L for Endura Heavy duty Vitrified tiles of size 300x300x10 to 12mm thick or high dimension (except thickness) of any colour any design durastone weather proof impact resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.Make : Johnsons/Somany/Orient Bell |
| 31 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 32 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 33 | M&L for Providing cement concrete Type B1, 1:2:4 (using 20mm graded stone aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 34 | Demolition of Reinforcement cement concrete of any description including removal of all demolished material form site complete all as specified and as directed. |
| 35 | M&L for Pre-cast RCC slabs for covers over drains using Reinforced Cement concrete 1:2:4, type B1 (20 mm graded stone aggregate) set in cement mortar 1:4 complete all as specified and as directed. |
| 36 | Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed. |
| 37 | M&L for Precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and as directed. |
| 38 | M&L for PCC 1:2:4, type -B1 (using 20mm graded stone aggregate ) as in surface channaels and drain etc complete all as specified and as directed. |
| 39 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete complete all as specified and as directed. |
| 40 | Taking down cement plaster of any desciption from wall (drain) including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed |
| 41 | M&L for Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work/block masonry or concrete surfaces finished fair and even complete all as specified and as directed. |
| 42 | M&L for Rendering 15mm thick in with cement mortar 1:4 on fair faces of PCC block work or concrete surfaces finished even and fair without using extra cement, complete all as specified and as directed. |
| 43 | Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 44 | M&L for Preparation of new plastered surface or unplastered ceiling surfaces and applying 3 coat of white wash on ceiling complete all as specified and as directed. |
| 45 | M & L for Preparation of old external surfaces of walls, Facias, cornices etc and applying two coats of wheather proof exterior acrylic emulsion paint with anti fungal property on wall surfaces complete all as specified and as directed. |
| 46 | S&F 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. |
| 47 | Material and labour for providing and fixing stainless steel Grade 304 railing/Drain cover made of hollow tubes, channels ,plates etc, including welding,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 48 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 49 | S&F PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to walls including clamps complete all as specified and as directed. |
| 50 | M&L for Fibreglass reinforced plastic (FRP), corrosion resistant drain covers of any size and any shape including frames as directed by Engineer-in-Charge having loading capacity from 2.5-6.0 Tons including key holes/keys to facilitate the lifting and placement of drain covers in the frame complete all as specified and as directed. |
| 51 | M&L for Preparation of old concrete Surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 52 | M&L for Preparation of new or previously untreated concrete Surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer compete all as specified and as directed. |
| 53 | S&F Aqua star compact UPVC Rainwater gutter 160mm, capacity 11Ltr/Mtr including aqua star compact bracket with extension rain water accessories complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender