Tender For Periodical Services & Welcome Maintenance To Certain Buildings And Repairs To Flooring, Plastering, Ceiling, Roof, Toilets, Metal / Aluminium / Wooden Joinery, Rolling Shutter, Plumbing And Connected Items At Technical & Non-Technical Area
Tender Value
32.50 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
19 days left
EMD
65000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services & Welcome Maintenance To Certain Buildings And Repairs To Flooring, Plastering, Ceiling, Roof, Toilets, Metal / Aluminium / Wooden Joinery, Rolling Shutter, Plumbing And Connected Items At Technical & Non-Technical Area And Repairs / Maintenance Of Internal Electric Supply, Light Fittings, Mcbs, Dbs, Garden Light Fittings And Repair / Maintenance Of Ceiling Fan, Wall Mounted Fan, Electric Geysers, Electric Meter, Solar Water Heater And Connected Works In Married Accommodation And Otm Buildings At Nad Bheemunipatnam, Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying Two Coats of White Wash on Walls complete all as specified and as directed. |
| 2 | M & L for preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying Two Coats of White Wash on Ceilings complete all as specified and as directed. |
| 3 | M & L for washing, rubbing down and stopping of distempered and painted surfaces of Walls including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One coat of Acrylic Washable Distemper on Wall surfaces complete all as specified and as directed. |
| 4 | M & L for washing, rubbing down and stopping of distempered and painted surfaces of Ceilings including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One coat of Acrylic Washable Distemper on Ceiling surfaces complete all as specified and as directed. |
| 5 | M & L for Complete removal of existing treatment of any description on Wall Surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying Two coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer on walls complete all as specified and as directed. |
| 6 | M & L for Complete removal of existing treatment of any description on Ceiling Surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying Two coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer on walls complete all as specified and as directed. |
| 7 | M & L for washing, rubbing down and stopping of painted surfaces including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One Coat of Cement based Paint on Walls complete all as specified and as directed. |
| 8 | M & L for Complete removal of existing treatment of any description on walls and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint on walls complete all as specified and as directed. |
| 9 | M & L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 12 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 13 | M & L for rendering on fair faces of brick / concrete surfaces, 10 mm thick in Cement Mortar 1:4, surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. |
| 14 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of Ceiling Surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | M & L for preparing newly plastered Wall Surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer on walls complete all as specified and as directed. |
| 16 | M & L for preparing newly plastered Ceiling Surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer on walls complete all as specified and as directed. |
| 17 | M & L for preparing newly plastered wall surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint on walls complete all as specified and as directed. |
| 18 | Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 19 | M & L for brick work with Fly Ash Blocks, Modular Size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. |
| 20 | M & L for brick work in half brick thick walls using Fly Ash Blocks, Modular Size straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 6mm dia bars at every fourth course of brick work complete all as specified and as directed. |
| 21 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 22 | M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed. |
| 23 | M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment along external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per RM by drilling 12 mm dia holes up to 300 mm deep and 300 mm centre to centre including plugging holes complete all as specified and as directed. |
| 24 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 25 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 26 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 27 | M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 300 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE. |
| 28 | S & F in repairs Decorative type Stainless Steel Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre and Decorative type Stainless Steel Globe type Brackets of size suitable to 25mm dia curtain rod complete all as specified and as directed. |
| 29 | S & F in repairs Health Faucet, Chromium Plated ABS Body with 1.00m Long Flexible Tube, Wall Hook, Non Return Valve complete as per Jaquar Catalogue No. ALD-579 or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified and as directed. |
| 30 | S & F in repairs Health Faucet, Chromium Plated ABS Body with 1.20m Long Flexible Tube, Wall Hook, complete as per Jaquar Catalogue No. ALD-573 or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 31 | S & F in repairs Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type, Short Body with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as per Jaquar Catalogue No. CON-047KN or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 32 | S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as per Jaquar Catalogue No. CON-011KN or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 33 | S & F in repairs Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as per Jaquar Catalogue No. CON-041KN or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 34 | S & F in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, Low Level Flushing Ccistern, White, with Inlet Ball Valve, Float, Handle, Flush Pipe of Polyethylene of Low or High Density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm Long with PTMT Check Nut and Union etc. including Brackets and Connections to Pipe and Flush Pipe complete all as specified and as directed. |
| 35 | S & F in repairs Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. CON-053KN or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 36 | S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, including Plastic Water Closet Seat, Back, Closed Pattern, White with Flat Bottom and Cover and Mild Steel Chromium Plated or Aluminium Hinging Device and \\"P\\" or \\"S\\" Trap complete all as specified and as directed. |
| 37 | S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified. |
| 38 | S & F in repairs Brass Chromium Plated Shower Rose of size 125mm with or with out swivel joints fixing to steel pipes complete all as specified and as directed. |
| 39 | S & F in repairs PVC Nahani Trap 100mm dia with Grating including jointing to waste pipe fixed in Cement Concrete, Type B1, 1:2:4 complete all as specified and as directed. |
| 40 | S & F 5mm thick Sheet Glass, Ordinary Quality and glazing with Oil Putty or with Wooden Beads in Squares not exceeding 0.5 Sq.m in each pane including Hacking out Old Broken Glass [any Thickness, Size, Quality or Description] from Wooden / Steel / Aluminium Frames Glazed with Putty or fixed with Beads complete all as specified and as directed. |
| 41 | S & F 4mm thick Figured Glass, Pin Head Type Glass, Ordinary Quality and glazing with Oil Putty or with Wooden Beads in Squares exceeding 0.5 Sq.m in each pane including Hacking out Old Broken Glass [any Thickness, Size, Quality or Description] from Wooden / Steel / Aluminium Frames Glazed with Putty or fixed with Beads complete all as specified and as directed. |
| 42 | S & F Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or stainless steel wire staples with existing or new wooden beading including necessary painting to beading to match with existing surfaces complete all as specified and as directed. |
| 43 | S & F in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick Commercial Plywood or PVC Sheet and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 44 | S & F in repairs Stainless Steel Kitchen Plate Rack of size 24\\"x30\\"x10\\", made of 0.85mm thick Stainless Steel Sheet complete all as directed. [Make: Model No. P-330 of Prayag or its equivalent in Polytuf / Nirali / Jayna / Neelkant] |
| 45 | S & F in repairs Stainless Steel, Tubular Towel Rail, D Type, 600 mm long between flanges complete all as per Jaquar Catalogue No. ACN-1111SM or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 46 | S & F in repairs Stainless Steel, Soap Dish, Fancy Type complete all as per Jaquar Catalogue No. ACN-1131N or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 47 | S & F in repairs 32mm dia PVC Flexible Waste Pipe, 900 mm long fixed to Wash Hand Basin or Sink in repairs complete all as specified and directed. |
| 48 | S & F in repairs PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc complete all as specified and as directed. |
| 49 | S & F in repairs Stainless steel kitchen sink with drainage board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm complete all as specified and as directed. |
| 50 | S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in rain water down pipes complete all as specified and as directed. |
| 51 | S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in rain water down pipes complete all as specified and as directed. |
| 52 | S & F 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed. |
| 53 | S & F 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed. |
| 54 | Resecuring or easing & adjusting without taking down shutter of size exceeding 1 Sq.m but not exceeding 2 Sq.m each including renewal of unserviceable screws, etc. as required complete all as specified and as directed. |
| 55 | Taking down Rolling Shutter of any size and description of size not exceeding 10 Sq.m Push Pull or Manual type and Re-Fixing to in Original Position after carrying out Repairs and servicing of Rolling Shutters for smooth and trouble free operation, Straightening Sliding Rails and removing of worn out components such as Hood Cover, Laths, Ball Bearings, Sliding Rails, Helical Wire Springs, Lock Plates, Brackets, Plates, Shaft Rod etc. including greasing including preparation of surfaces and applying Two coats of Epoxy Anti-Corrosive Paint over one coat of Red Oxide / Zinc Chrome Primer complete all as specified and as directed. Note: Spares required if any shall be measured and paid separately as supply only. |
| 56 | All as per Serial Item No. 76 above but Gear Operated Rolling Shutter with Bevel Gear Box and Cranked Handle of size exceeding 10 Sq.m but not exceeding 20 Sq.m complete all as specified and directed. |
| 57 | Supply only Interlocking Lath [75mm Width] Section made of 1.25 mm thick CRCA Sheet, in single piece to match with existing and fitted with automatic lock section fitted with malleable mild steel clips on either side and duly shop coated of primer complete all as specified and as directed. |
| 58 | Supply only 150mm Dia Helical Wire Spring made of 6.4mm dia of High Tensile Steel Wire conforming to IS – 4454 having 60 to 80 Helical for smooth working complete all as specified and as directed. |
| 59 | Supply only Mild Steel Anchoring Rod made of MS ERW Pipe, 50 mm bore, Medium Grade, conforming to IS – 1239 complete all as specified and as directed. |
| 60 | Supply only \\"D\\" Type Helical Spring, 450mm Long, made of 6.4mm dia of High Tensile Steel Wire conforming to IS – 4454 for smooth working complete all as specified and as directed. |
| 61 | S & F Locking System with Wheel type Handle suitable for Wicket Gate including complete mechanism including applying two coats of Aluminium Paint over a coat of Red Oxide primer after preparation of surfaces complete all as specified and as directed. |
| 62 | Supply only Rolling Shutter Shaft made of MS ERW Pipe, 50 mm bore, Medium Grade, conforming to IS – 1239 complete all as specified and as directed. |
| 63 | Supply only Ball Bearing of size 50/65mm dia suitable for Rolling Shutters complete all as specified and as directed. |
| 64 | Demolition of Unreinforced Cement Concrete including tiles of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 65 | M & L for PCC 1:4:8, Type D2, using 40mm graded stone aggregate as in Mass concrete for sunken floor complete all as specified and as directed. |
| 66 | M & L for 50 mm thick, PCC 1:2:4, Type B0, using 20mm graded aggregate as in Sub base complete all as specified and as directed. |
| 67 | M & L for rendering 15mm thick in cement mortar 1:3 on Floor / Wall Surfaces finished even and smooth without using extra cement including mixing Liquid Water Proofing Compound Conplast @ 200 ml per Bag of Cement for levelling the surface smooth to receive the Water Proofing Membrane and applying Three Coats of Brushbond RFX acrylic based cementitious material as per Manufacturers instructions, thereafter applying Primer @ 0.5 KG / Sq.m over the prepared surface and applying Hot Blown Cutback Bitumen @ 0.70 KG / Sq.m and laying Polythene Film 150 Micron thick with Cutback Bitumen Adhesive with minimum 150mm overlap on all sides complete all as specified and as directed. Make of Chemicals: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited. |
| 68 | M & L for sweeping clean and washing down with water to remove dust etc to receive the water proofing membrane, priming the surface with a coat of Oil Based Bituminous Primer conforming to IS – 3384 [Latest] @ 0.3 Litre / Sq.m, laying APP Modified [Polyester Reinforced] Membrane of 3mm thick weighing not less than 3.8 KG / Sq.m confirming to IS – 16532 [2017], by torch application with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces by thermo fusion and finished with a coat of bituminous aluminium paint @ 100 grams per Sq.m on top for water proofing treatment complete including taking down existing Membrane of any description and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 69 | M & L for PCC 1:5:10, Type D2, using 40mm graded stone aggregate as in Mass concrete for sunken floor complete all as specified and as directed. |
| 70 | M & L for 100 mm thick, PCC 1:2:4, Type B-2, using 40 mm graded stone aggregate as in Sub base for flooring, Steps etc including necessary formwork to sides of concrete complete all as specified and as directed. |
| 71 | M & L for Loose Filling with broken stone or boulders of gauge 40 to 80mm in soakage pits etc. including removing un serviceable brick bats etc. complete all as specified and directed. |
| 72 | S & F 25mm outer dia of pipe, 3–layer PP–R [Polypropylene Random Copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete to walls, ceilings or in floors etc. including testing including taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 73 | S & F 20mm outer dia of pipe, 3–layer PP–R [Polypropylene Random Copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete to walls, ceilings or in floors etc. including testing including taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 74 | Cutting chases, pinning in Brick Walls, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth brick walls complete all as specified and as directed. |
| 75 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed. |
| 76 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed. |
| 77 | Taking down Aluminium Door Shutters of any description exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and refixing in the same opening after carrying out easing / adjusting, repair / replacement of builders hardware such as handles, friction hinges, locks etc. complete all as specified and as directed. Note: Renewal of Builder's Hardware Articles, if specially ordered, shall be paid for as Supply only under relevant Items of this BoQ. |
| 78 | S & F Second Class Hard Wood, Plain, Solid, Straight Chowkats and Frames, Wrought, Framed, Rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints complete all as specified and directed. |
| 79 | M & L for providing Cement Concrete, Type C1, 1:3:6 using 20mm Graded Aggregate as in Lintels up to 1.5m Clear Span, Cills, Steps, Seismic and other Similar Bands, Plinth Courses, Copings, Bed Plates etc. complete including necessary formwork complete all as specified and as directed. |
| 80 | M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 81 | S & F 35mm thick Flush Shutter Solid Core Construction with Block Board Core and Plywood Face Panels Commercial type on One Side and Decorative Choice Veneers on other side, with 6mm thick Teakwood Lipping and fitted to Chowkats complete all as specified and as directed. |
| 82 | S & F Factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., Divided into Squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed. |
| 83 | M & L for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment at Points of Contact of Wood Work by Chemical Emulsion [in Oil or Kerosene based solution] @ 0.5 Litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed. |
| 84 | S & F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per Specification & Drawing shown on Serial Page No. 160 of MES Schedule Part - II complete all as specified and as directed. |
| 85 | S & F Factory made Solid Panel PVC Door Shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \\"C\\" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing shown on Serial Page No. 157 of MES Schedule Part - II complete all as specified and as directed. |
| 86 | S & F Factory made UPVC Sliding Window, Three Track, White Colour of any size, made of extruded profiles with wall thickness of 2.3mm±0.2mm, Window profile with hollow section with multi chamber, Frame of size 88mm X 52mm, Sliding Sash of size 42mm X 67mm, Sliding Mesh Sash of size 42mm X 57mm, Sliding Interlock [One vertical length in each shutter] of size 45.50mm X 28mm, Glazing Bead of size 24.50mm X 16mm shall be mitred cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM Gasket, 1.2mm±0.2mm thick Galvanized Steel Frame of size 30mmx 18mm, 2 Nos, Sliding Sash of size 30mm x 18mm, Sliding Mesh Sash of size 26mm x 10mm profile to be inserted in required profile, frame shall be fixed to the wall with 8mm X 100mm long fasteners, Hardware such as Touch lock of zinc alloyed [white powder coated], Steel roller system, including Glazing with 5mm thick selected quality Sheet Glass and Stainless Steel Wire Cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories shall be provided with proper operative and locking hardware mechanism and Aluminium track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock. frame shall be fixed to wall with high quality fasteners and silicon glue shall be applied to fill up gap between frame and wall to make leak proof complete all as specified and as per Manufacturer instructions. Note: The unit rate quoted by contractor includes cost of Sheet Glass and Stainless Steel Wire Cloth includes all other connected accessories. Net opening will be measured for payment purpose. |
| 87 | S & F Powder Coated [120 Microns thick], Mild Steel work confirming to Fe - 290, Grade E-165, as in framed work such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work including preparation of surfaces including pre-treatment for degreasing, phosphatising etc. before powder coating complete all as specified and as directed. Note: The Grills shall be Powder Coated with two coats of powder coating of 60 Microns thick each of approved colour. The Powder coating shall be Matt Finished. |
| 88 | S & F 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed. |
| 89 | S & F Aluminium anodised barrel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed. |
| 90 | S & F Aluminium anodised Handle, Cast Type, of size 150 mm complete all as specified and as directed. |
| 91 | S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 200 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 92 | S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 150 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 93 | S & F in repairs 18mm thick, Prelaminated Particle Board, One Side Decorative Choice Lamination and other side Balancing White, Medium Density, Interior Grade fixed with screws to wooden frames, partitions, shelves, cupboards, door panels complete all as specified and as directed. |
| 94 | S & F Continuous [Piano] Hinges, Mild Steel, Bright finish or Electrogalvanised and width of Flaps 30mm [When Open] complete all as specified and as directed. |
| 95 | S & F Magnetic Catches with Striking Plate, First quality suitable for Cupboard shutters complete all as specified and as directed. |
| 96 | S & F 40mm dia stainless steel fancy type bright finished Cupboard Knobs fixed with nut, screw and washer complete all as specified and as directed. |
| 97 | S & F Hasp and Staple, safety type of aluminium anodised including bolt to hinge plate, fixed with screws of 100mm size complete all as specified and as directed. |
| 98 | Dismantling Timber Scantlings 40 Sq.cm and over in Section, Framed/unframed in any position complete all as specified and as directed. |
| 99 | M & L for Second Class Hard Wood Plain Fillets, Square, Rectangular or Triangular in section, Cross Sectional area exceeding 3 Sq.cm but not exceeding 6 Sq.cm, wrought, secured with nails or brads to timber frame all as specified. |
| 100 | Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 101 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Casing and Capping including all accessories surface type and Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and 3 mm thick Hylam Sheet top cover for fixing switches, fittings, regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified and as directed. |
| 102 | All as per Serial Item No. 101 above but for One Light Point / Fan Point controlled by Two Nos. of, Two way Switches complete all as specified and as directed. |
| 103 | All as per Serial Item No. 101 above but One 3 Pin Switch Socket Outlet 6 Amps on Independent Board complete all as specified. |
| 104 | All as per Serial Item No. 101 above but for One 3 pin Socket Outlet 6 Amps on the Same Board with other switches complete all as specified and as directed. |
| 105 | All as per Serial Item No. 101 above but One 3 Pin Switch Socket Outlet 16 Amps on Independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor. |
| 106 | S & F Switch Piano, Flush Button, Single Pole, One Way, 5 Amps, 230 Volts complete all as specified and as directed. |
| 107 | S & F Switch Piano, Flush Button, Single Pole, Two Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 108 | S & F Socket Outlet, 3 & 2 Pin, Multipurpose, 6 Amps, 230 Volts, Flush Type complete all as specified and as directed. |
| 109 | S & F Switch Socket Outlet, 3 & 2 Pin, Multipurpose, 6 Amps, 230 Volts, Flush Type complete all as specified and as directed. |
| 110 | S & F Switch Socket Outlet, Multipurpose, 3 pin, 16 Amps and 3 pin, 6 Amps, Flush Type, 230 Volts controlled by One Switch complete all as specified and as directed. |
| 111 | S & F Ceiling Rose, Surface Bakelite, 65 x 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. |
| 112 | S & F Electronic Fan Regulator, Stepped Type, Flush Type, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 113 | S & F Bell, Ding Dong / Multi Music Type, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 114 | S & F Bell Push, Flush Button, Single Pole, 6 Amps, 230 Volts complete all as specified and as directed. |
| 115 | S & F Wall mounted Energy efficient LED Decorative Wall Light fixture made up of Polycarbonate, suitable for 9 W Retrofit LED Lamp B22 Base, including 9W LED Lamp, 5700K of cool white, with Circular Acrylic Diffuser, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing Fluorescent tube light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95. Make: Model / Catalogue No. LHDL06160099 of Havells & 9W B-22 LED Lamp, Catalogue No. NU BULB PLUS 9 W 865 B22 3 STAR, of Havells or its Equivalent Model in Philips / Crompton Greaves / Wipro / GE / Bajaj / Jaquar |
| 116 | S & F Lamp Holder, Insulated Body with Back Plate, 230 Volts for Batten Fittings complete all as specified and as directed. |
| 117 | S & F LED Bulb of not less than 1000 Lumens output, 3000 K, IP40 operating voltage 90-270 Volts, AC, 50 Hz, Natural white colour complete all as specified and as directed. |
| 118 | S & F Energy efficient Sleek LED Mirror Light Fitting of not less than 1000 Lumens, Surface / Recess mounted with Acrylic / PMMA diffuser for soft glare free light with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 119 | S & F Energy efficient & Long life Building Security Light Luminaire / Street Light Luminaire, of not less than 2500 Lumens output, 5700 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 1.50 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing Light Fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 120 | M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old sub main wiring of any description and making good disturbed surface complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit. Rate quoted is also deemed to be including cost of Cutting chases, pinning in Brick Walls, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, Cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 121 | M & L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old sub main wiring of any description and making good disturbed surface complete all as specified and as directed. Note: 3 runs of 2.5 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit. Rate quoted is also deemed to be including cost of Cutting chases, pinning in Brick Walls, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, Cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 122 | M & L for Sub main wiring with 2 runs of single core 1.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old sub main wiring of any description and making good disturbed surface complete all as specified and as directed. Note: 3 runs of 1.5 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit. Rate quoted is also deemed to be including cost of Cutting chases, pinning in Brick Walls, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, Cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 123 | S & F in repairs MCB DB, TPN, 4 Way, 415 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs and provision for MCCB as incomer complete all as specified. |
| 124 | S & F in repairs MCB DB, SPN, 8 Way, 240 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed. |
| 125 | S & F in repairs MCB DB, SPN, 4 Way, 240 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed. |
| 126 | S & F MCB, FP, 40 to 63 Amps, 10 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed. |
| 127 | S & F MCB, DP, 40 to 63 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. |
| 128 | S & F MCB, SP, 6 to 32 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. |
| 129 | S & F in repairs SP & N Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed. |
| 130 | S & F in repairs PVC Sheathed and insulated, Twin Core, Flat or Circular, 4 Sq.mm, Stranded Aluminium Conductor Cable, 1100 Volts, Heavy Duty, served with inner sheathing of PVC Tape as in Service Connection suspended by insulating hangers not more than 1 metre apart including 4mm Suspension Wire complete all as specified and as directed. |
| 131 | Taking down unserviceable 40 Watt Tube Light Fitting / 20 Watt LED Tube Light Fitting and repair / replacement of old unserviceable Spares with New Spares, re-assembling and re-fixing in exsting position and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. |
| 132 | S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1000 Lumens output, 5700K of cool white, with extruded Aluminium housing and robust construction with necessary acrylic diffuser & Integrated Electronic Driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing tube light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 133 | S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 2000 Lumens output, 5700K of cool white, with extruded Aluminium housing and robust construction with necessary acrylic diffuser & Integrated Electronic Driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing tube light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 134 | S & F in repairs Surface & wall mounted Energy efficient T8 LED Tube Light Fitting, of not less than 2000 Lumens output, 5700K of Cool White, including T8 LED Tube with extruded Aluminium housing and robust construction with necessary acrylic diffuser & Integrated Electronic Driver, all accessories internally prewired complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 135 | S & F in repairs LED Power Driver for Downlighters suitable for 36 / 42 Watt, 240 Volts, Single Phase AC Supply, 50 Hz complete all as specified and as directed. |
| 136 | S & F in repairs LED Power Driver for Downlighters suitable for 24 Watt, 240 Volts, Single Phase AC Supply, 50 Hz complete all as specified and as directed. |
| 137 | S & F Recess mounted LED Downlight, Round type of not less than 1200 Lumens output, 6000 K with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 138 | S & F Recess mounted LED Downlight, Round type of not less than 3600 Lumens output, 6000 K with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 139 | Taking down unserviceable Post Top Lantern / Gate Light of any type / description and repair / replacement of old unserviceable Spares with New Spares, re-assembling and re-fixing in exsting position and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. |
| 140 | S & F New generation, Energy Saving, Environmental Friendly, Long Life Aesthetically Designed LED Landscape Luminaire / Integral LED Bollard for Downward Lighting with High Power LED as light source, Decorative Pyramid Tripod type, of not less than 1000 Lumens output, Outdoor type, 5700 K, with Pressure Die Cast Aluminium Housing with Opal Acrylic Diffuser, IP65 Protection, electronic driver, all accessories internally prewired and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including PCC 1:2:4, Type B1 foundation for fixing including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95. Make: Model / Catalogue No. LBLSN-10-CDL of Crompton Greaves or its Equivalent Model in Philips / Havells / Wipro / GE / Bajaj / Jaquar |
| 141 | S & F New generation, Energy Saving, Environmental Friendly, Long Life Aesthetically Designed with Symmetrical Light Distribution LED Landscape Luminaire / Post Top Lantern with High Power LED as light source, of not less than 4000 Lumens output, Outdoor type, 5700 K, with Spun Aluminium with Clear Cover Housing, IP65 Protection, electronic driver, all accessories internally prewired and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95. Make: Model / Catalogue No. LPTO-40-CDL-M of Crompton Greaves or its Equivalent Model in Philips / Havells / Wipro / GE / Bajaj / Jaquar |
| 142 | M &L for checking the serviceability including loose contact and condition of cable terminations of all the existing MCB DBs at any building/any place once in three months and opening a DB serviceability register and recording building wise including obtaining users signature in the register complete all as specified and as directed. Note: The checking shall be carried out in presence of user. One time checking including entering in the register is considered as one job. |
| 143 | S & F Energy efficient LED Flood Light fitting, of not less than 12000 Lumens output, 6500 K, with Pressure Die Cast Aluminium Housing, IP66 Protection and Surge Protection device of 10 KV, Heat resistant Toughened Glass Cover, high power LEDs as light source, electronic driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 144 | S & F in repairs 20 Watt Inverter Rechargeable Emergency LED Light with 2400 Mah Powerful Battery, Energy Efficient, Recharging Time 4-6 Hours, Power Backup up to 4 Hours complete all as specified and as directed. |
| 145 | Dismantling the Ceiling Fan and its Allied Minor Spares / Parts and taking out the Bearings / Bushes and refixing the same with all the parts i.e. Down Rod, Canopies, Fan Blades etc. replacing the damaged Spilt Pins and Screws, Nuts and Spring Washers [for Blade/Body] including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm as required complete all as specified and as directed. Note: Supply only spares like Bearings / Bushes, Blades, Down Rod, Capacitor, Shackle & Clamp and Canopy shall be measured and paid separately as supply only under this BoQ. Rewinding of Fan Motor Shall also be measured and paid separately wherever ordered. |
| 146 | All as per Serial Item No. 145 above, but Exhaust Fan of any Sweep complete all as specified and as directed. |
| 147 | M & L for Rewinding of Motor of Ceiling Fan of any Sweep and of any description using Super Enamelled Copper Conductor of suitable Gauge including Insulation, Varnishing, Packing and Testing etc., Cleaning, Greasing etc. complete all as specified and directed. |
| 148 | M & L for Rewinding of Motor of Exhaust Fan of 300 to 450mm Sweep and of any description using Super Enamelled Copper Conductor of suitable Gauge including Insulation, Varnishing, Packing and Testing etc., Cleaning, Greasing etc. complete all as specified and directed. |
| 149 | Supply only Ball Bearing suitable for Ceiling Fan / Exhaust Fan of any Sweep and any description complete all as specified and directed. Make: SKF / NBC |
| 150 | Supply only Capacitors of 2.5 Mfd Capacity complete all as specified and directed. Make: Usha / Crompton / Tibcon / Universal |
| 151 | Supply only Gun Metal Bush of any size complete all as specified and directed. Make: TATA / MSP |
| 152 | Supply only Shackle & Clamps including, Rubber Bush, Bolts, Nuts & Split Pin etc. complete suitable for Ceiling Fan of any Sweep and any description complete all as specified and directed. |
| 153 | Supply only MS Down Rod of size 15 mm bore, 500mm Long including making Two No. of Holes on either ends suitable for fixing Bolts of 8mm Dia suitable for Ceiling Fan of any Sweep and any description complete all as specified and directed. |
| 154 | S & F in repairs Electronic Fan Regulator, Stepped Type, Flush Type, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 155 | S & F in repairs Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 156 | M & L for preparation of surfaces of Ceiling Fan of any Sweep and applying One Coat of Synthetic Enamel Paint of approved colour and Writing MES Serial Number as per Standard Format Complete all as specified and as directed. |
| 157 | M & L for preparation of surfaces of Exhaust Fan of any Sweep and applying One Coat of Synthetic Enamel Paint of approved colour and Writing MES Serial Number as per Standard Format Complete all as specified and as directed. |
| 158 | Supply only Three Core, PVC insulated, sheathed flexible Copper Conductor Cable of size 1.5 Sq.mm, 1100 Volts Grade complete all as specified and as directed. |
| 159 | M & L for Comprehensive Repair / Maintenance of Storage Type Electric Water Heater [Geyser] Vertical or Horizontal type of Capacity 25 Litres comprising of the following: [a] Inspection, taking down, opening or dismantling, de-scaling, brushing and thoroughly cleaning the storage tank complete to the satisfaction of the User / Engineer-in-Charge. [b] Checking of all Stop Cock, Pressure Release Valves, Fusible Plugs for its serviceability etc. in situ to ensure free movement of the parts including supply and replacing the Washers / Gasket, Nuts etc.[c] Checking and rectifying Earth Continuity of the Electrical Circuits of the Geysers and Power Point. [d] Checking and re-fixing Thermostat and re-adjusting.[e] De-scaling the Immersion Type Heating Element and Siphon Assembly with diluted Hydrochloric Acid or clear Pedette Solution.[f] Checking of Indicator Lamp for its serviceability.[g] Re-assembling the Geyser, re-installing and testing complete.Note: Spares / Parts / Components of Geysers found unserviceable shall be replaced by the contractor. New Spares / Parts / Components as required shall be measured and paid separately under respective Items of this BoQ as supply only. |
| 160 | Supply only Thermostat including Rubber / PVC Gasket Tube Set to a Temperature not higher than the range of 70°C suitable for 25/50 Litres Capacity Geyser complete all as specified and as directed. |
| 161 | Supply only Heating Element of capacity 2.0 KW including Rubber Gasket & Washer etc. as per existing Make / OEM complete all as specified and as directed. |
| 162 | Supply only Copper Syphon Assembly suitable for 25 Litre Capacity Geysers of any make as required at site / as per existing Model / Make complete with Inlet and Outlet and provision for Thermostat Pipe with Drain Pipes with Drain Plug, Screws, Studs, Clamps for fixing Heating Elements etc. including Gasket complete all as specified and as directed. |
| 163 | Supply only Plug Top 3 Pin, 16 Amps, 240 Volts complete all as specified and as directed. |
| 164 | Supply only 3 Core, PVC Insulated, Sheathed Flexible Copper Conductor Cable of size 2.5 Sq.mm suitable for connecting up Geyser complete all as specified and as directed. |
| 165 | Supply only LED Neon type Indicating Lamp [Green / Red], 240 Volts, AC, 50 Hz suitable for Geysers complete all as specified and as directed. |
| 166 | Supply only Safety Valve suitable for 25/50 Litres Capacity Geyser complete all as specified and as directed. |
| 167 | M & L for Detecting and Arresting of leakage in Storage Tank of 25 Litres Capacity Geysers by Brazing and Soldering at leakage point and testing complete all as specified and as directed. |
| 168 | M & L for preparation of surface of 25 Litres Capacity Geysers by scrapping and applying One Coat of Synthetic Enamel Paint of approved colour over a coat of Red Oxide / Zinc Chrome Primer by spray painting duly filling cavities etc. and Writing MES No. & GE [P] [N] Kalinga as per standard size including cleaning complete all as specified and as directed. |
| 169 | S & F in repairs PVC Connection for Hot & Cold Water of 15mm Bore and 450mm long with PTMT check nut and union etc complete all as specified and as directed. |
| 170 | S & F in repairs PVC Connection for Hot & Cold Water of 15mm Bore and 600mm long with PTMT check nut and union etc complete all as specified and as directed. |
| 171 | Supply only Anchor Bolt of size 10mm dia and 100mm Long Bolt including Nut, Washer for mounting the Geyser complete all as specified and as directed. |
| 172 | S & F Energy efficient, BEE 5 Star rated Storage type Water Heater [Geyser] of 25 Litres Capacity with 2000 Watt Capacity Heating Element, Conforming to IS - 2082, Vertical Storage type with Stainless Steel Inner Tank and ABS Outer Shell complete fixed to wall with suitable expansion fasteners including 15mm dia PVC Flexible Hot & Cold Water connections and 15mm bore Brass Chromium Plated Non-Return Valve including taking out old unserviceable Geyser and depositing to MES Store Yard complete as specified and as directed. Make: Bajaj / Usha / Crompton Greaves / Jaquar |
| 173 | Supply only MS Hooks of required size suitable for Ceiling Fan of any Sweep and any description complete all as specified and directed. |
| 174 | S & F AC Single Phase Static Electronic KWH Energy Meter of Accuracy Class 1.0, 240 Volts, 50 Hz, with Backlite LCD Display, Optical Port of Rating 10-60 Amps including taking out old unserviceable Energy Meter and depositing to MES Store Yard complete as specified and as directed. |
| 175 | S & F AC Three Phase Static Electronic KWH Energy Meter of Accuracy Class 1.0, 415 Volts, 50 Hz, with Backlite LCD Display, Optical Port of Rating 10-60 Amps including taking out old unserviceable Energy Meter and depositing to MES Store Yard complete as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender