Tender For Special Repair To Lt Panel, Feeder Pillars, Apfc Panel Alongwith Connected Lt Cables, Earthing And Allied Services And Provn Of Chimney At Basistha 151 Base Hosp Under Ge Guwahati
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Jul 2026
16 days left
EMD
98800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Lt Panel, Feeder Pillars, Apfc Panel Alongwith Connected Lt Cables, Earthing And Allied Services And Provn Of Chimney At Basistha 151 Base Hosp Under Ge Guwahati
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning of floor mounted LTOUTDOOR feeder pillar box AC 415V,50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure /cubicle, fully compartmentalized type O/P terminal of suitable capacity, suitable foroutdoor use, withbottom cable entry with suitable cable glands structure made out of 2mm thick outer body and inner partition 1.5mm thick hinged doors atfront with suitable locking arrangement ,with CPRI report tested forIP55, made ofCRCA steel sheet of suitable Size with angle ironframe work and legs of ISA 50X50X5 mm, with four legs with suitable mounting arrangement for copper bus bars of suitable capacity i.e 600 Amps structure treated under 8-tank metal treatment process and duly powder coated orepoxy coated, dimension :1500 X1200 X600 mm (HXWXD) complete all as specified and as directed.INCOMER :-(a) MCCB 250 Amp, 4 pole 415 Volts with microprocessor controller of breaking capacity 36KA with adjustable thermal and magnetic settings, with Spreaders links & Rotary Handle- 01 Nos(b) Digital MFM 96sqmm Cl 1 - 1 nosItem continued below as srl item No.1.10 |
| 2 | Item continued from srl item No.1.00 here-in-above(c) CT coil 400/5 Cl. 1, 15va tape wound - 3 nos(e) LED Indicator 22.5mm dia RYB - 1 set(f) MCB 32A SP 10ka 'C' series - 3 nos(g) Manual Change Over Switch 250A 4Pole - 1 nosOutgoing:- (i) MCCB 125 Amp, 4P, 25KA with adjustable thermal and magnetic setting with Spreaders links & Rotary Handle - 4 nos(ii) MCCB 250 Amp, 4P,25KA with adjustable thermal and magnetic setting with Spreaders links & Rotary Handle -1 nosBUSBAR :-(Outgoing)(i) Copper Bus-bar 600 Amps , supported on non hygroscopic fibres and brass screws for mounting - 04 Nos - 1 setNote: (a) Internal Incomer MCCB and Outgoing MCCB Connected through solid Copper bus bar.(b) MISCELLANEOUS Viz. wires, Sockets, terminals, din channels, nuts & bolts.-1 lot(c) Technician charges for internal wiirng - 1 set(d) Electrical Panel Boards IP55 - 1 nos |
| 3 | Supply, installation, testing and commissioning of floor mounted LTOUTDOOR feeder pillar box AC 415V,50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure /cubicle ,fully compartmentalized type O/P terminal of suitable capacity, suitable foroutdoor use,withbottom cable entry with suitable cable glands structure made out of 2 mm thick outer body and inner partition 1.5mm thick hinged doors atfront with suitable locking arrangement ,with CPRI report tested forIP55, made of CRCA steel sheet of suitable Size with angle ironframe work and legs of ISA 50X50X5 mm ,with four legs with suitable mounting arrangement for copper bus bars of suitable capacity i.e 1000 Amps structure treated under 8-tank metal treatment process and duly powder coated orepoxy coated ,Minimum box dimension :1500 X2650 X400 mm (HXWXD), complete all as specified and as directed.INCOMER :-1.1(a) MCCB 630 Amp ,4 pole 415 Volts with microprocessor controller of breaking capacity 36KA with adjustable thermal and magnetic settings, with Spreaders links & Rotary Handle- 01 NosItem continued below as srl item No.2.10 |
| 4 | Item continued from srl item No.2.00 here-in-above1.2 Digital MFM 96sqmm Cl 1. - 1 nos1.3 CT coil 400/5 Cl. 1, 15va tape wound - 3 nos1.4 LED Indicator 22.5mm dia RYB - 1 set1.5 MCB 32A SP 10kA 'C' series - 3 nos1.6 Manual Change Over Switch 630A 4Pole - 1 nosOutgoing:-1.7(i) MCCB 125 Amp, 4P, 25KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle - 3 nos(ii) MCCB 160 Amp, 4P,25KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle -1 nos(ii) MCCB 250 Amp, 4P,25KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle -1 nos 1.8 BUSBAR :-(Outgoing)(i) Copper Bus-bar 1000 Amps , supported on non hygroscopic fibres and brass screws for mounting - 04 Nos -1 set1.9 Note: Internal Incomer MCCB and Outgoing MCCB Connected through solid Copper bus bar.2.1 MISCELLANEOUS Viz. wires, Sockets, terminals, din channels, nuts & bolts.-1 lot2.2 Technician charges for internal wiirng - 1 set2.3 Electrical Panel Boards IP55 - 1 nos |
| 5 | Supply, installation, testing and commissioning of floor mounted LTOUTDOOR feeder pillar box AC 415V,50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure /cubicle ,fully compartmentalized type O/P terminal of suitable capacity, suitable foroutdoor use,withbottom cable entry with suitable cable glands structure made out of 2 mm thick outer body and inner partition 1.5mm thick hinged doors atfront with suitable locking arrangement ,with CPRI report tested forIP55, made of CRCA steel sheet of suitable Size with angle ironframe work and legs of ISA 50X50X5 mm ,with four legs with suitable mounting arrangement for copper bus bars of suitable capacity i.e 1000 Amps structure treated under 8-tank metal treatment process and duly powder coated orepoxy coated ,Minimum box dimension :1500 X1400 X400 mm (HXWXD), complete all as specified and as directed.INCOMER :-1.1(a) MCCB 630 Amp,4 pole 415 Volts with microprocessor controller of breaking capacity 36KA with adjustable thermal and magnetic settings, with Spreaders links & Rotary Handle- 01 NosItem continued below as srl item No.3.10 |
| 6 | Item continued from srl item No.3.00 here-in-aboveOutgoing:- 1.2 Digital MFM 96sqmm Cl 1. - 1 nos1.3 CT coil 400/5 Cl. 1, 15va tape wound - 3 nos1.4 LED Indicator 22.5mm dia RYB - 1 set1.5 MCB 32A SP 10kA 'C' series - 3 nos1.7(i) MCCB 400 Amp, 4P, 36 KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle - 1 nos(ii) MCCB 160 Amp, 4P,25KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle -2 nos(iii) MCCB 100 Amp, 4P,25KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle -1 nos 1.8 BUSBAR :-(Outgoing)(i) Copper Bus-bar 1000 Amps , supported on non hygroscopic fibres and brass screws for mounting - 04 Nos -1 set1.9 Note: Internal Incomer MCCB and Outgoing MCCB Connected through solid Copper bus bar.2.1 MISCELLANEOUS Viz. wires, Sockets, terminals, din channels, nuts & bolts.-1 lot2.2 Technician charges for internal wiirng - 1 set2.3 Electrical Panel Boards IP55 - 1 nos |
| 7 | Supply, installation, testing and commissioning of floor mounted LT OUTDOOR feeder pillar box AC 415V,50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure /cubicle ,fully compartmentalized type O/P terminal of suitable capacity, suitable foroutdoor use,withbottom cable entry with suitable cable glands structure made out of 2 mm thick outer body and inner partition 1.5mm thick hinged doors atfront with suitable locking arrangement ,with CPRI report tested forIP55, made of CRCA steel sheet of suitable Size with angle ironframe work and legs of ISA 50X50X5 mm ,with four legs with suitable mounting arrangement for copper bus bars of suitable capacity i.e 1000 Amps structure treated under 8-tank metal treatment process and duly powder coated orepoxy coated ,Minimum box dimension :1575 X1400 X400 mm (HXWXD),complete all as specified and as directed.INCOMER :-1.1(a) MCCB 630 Amp ,4 pole 415 Volts with microprocessor controller of breaking capacity 36KA with adjustable thermal and magnetic settings, with Spreaders links & Rotary Handle- 01 NosItem continued below as srl item No.4.10 |
| 8 | Item continued from srl item No.4.00 here-in-above1.2 Digital MFM 96sqmm Cl 1. - 1 nos1.3 CT coil 400/5 Cl. 1, 15va tape wound - 3 nos1.4 LED Indicator 22.5mm dia RYB - 1 set1.5 MCB 32A SP 10kA 'C' series - 3 nosOutgoing:- 1.7(i) MCCB 400 Amp, 4P, 36 KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle - 1 nos(ii) MCCB 200 Amp, 4P,25KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle -3 nos 1.8 BUSBAR :-(Outgoing)(i) Copper Bus-bar 1000 Amps , supported on non hygroscopic fibres and brass screws for mounting - 04 Nos -1 set1.9 Note: Internal Incomer MCCB and Outgoing MCCB Connected through solid Copper bus bar.2.1 MISCELLANEOUS Viz. wires, Sockets, terminals, din channels, nuts & bolts.-1 lot2.2 Technician charges for internal wiirng - 1 set2.3 Electrical Panel Boards IP55 - 1 nos |
| 9 | Supply, installation, testing and commissioning of floor mounted LT OUTDOOR feeder pillar box AC 415V,50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure /cubicle ,fully compartmentalized type O/P terminal of suitable capacity, suitable foroutdoor use,withbottom cable entry with suitable cable glands structure made out of 2 mm thick outer body and inner partition 1.5mm thick hinged doors atfront with suitable locking arrangement ,with CPRI report tested forIP55, made of CRCA steel sheet of suitable Size with angle ironframe work and legs of ISA 50X50X5 mm ,with four legs with suitable mounting arrangement for copper bus bars of suitable capacity i.e 600 Amps structure treated under 8-tank metal treatment process and duly powder coated orepoxy coated ,Minimum Box dimension :1200 X1200 X400 mm (HXWXD), complete all as specified and as directed.INCOMER :- 1.1(a) MCCB 250 Amp ,4 pole 415 Volts with microprocessor controller of breaking capacity 36KA with adjustable thermal and magnetic settings, with Spreaders links & Rotary Handle- 01 NosItem continued below as srl item No.5.10 |
| 10 | Item continued from srl item No.5.00 here-in-above1.2 Digital MFM 96sqmm Cl 1. - 1 nos1.3 CT coil 400/5 Cl. 1, 15va tape wound - 3 nos1.4 LED Indicator 22.5mm dia RYB - 1 set1.5 MCB 32A SP 10kA 'C' series - 3 nos1.6 Manual Change Over Switch 250A 4Pole - 1 nosOutgoing:- 1.7(i) MCCB 160 Amp, 4P, 25 KAwith adjustable thermal and magnetic setting with Spreaders links & Rotary Handle - 2 nos1.8 BUSBAR :-(Outgoing)(i) Copper Bus-bar 1000 Amps , supported on non hygroscopic fibres and brass screws for mounting - 04 Nos -1 set1.9 Note: Internal Incomer MCCB and Outgoing MCCB Connected through solid Copper bus bar.2.1 MISCELLANEOUS Viz. wires, Sockets, terminals, din channels, nuts & bolts.-1 lot2.2 Technician charges for internal wiirng - 1 set2.3 Electrical Panel Boards IP55 - 1 nos |
| 11 | Supply, installation, testing and commissioning of Automatic Power Factor Correction Panel, 125 kVAR capacity, suitable for 415 Volts, 3 phase, 50 Hz system, comprising:Supply, installation, testing and commissioning of floor mounted LT OUTDOOR feeder pillar box AC 415V, 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure /cubicle, fully compartmentalized type O/P terminal of suitable capacity, suitable foroutdoor use,withbottom cable entry with suitable cable glands structure made out of 2 mm thick outer body and inner partition 1.5mm thick hinged doors atfront with suitable locking arrangement, with CPRI report tested for IP55, made of CRCA steel sheet of suitable Size with angle ironframe work and legs of ISA 50X50X5 mm, with four legs with suitable mounting arrangement for copper bus bars of suitable capacity i.e 600 Amps structure treated under 8-tank metal treatment process and duly powder coated orepoxy coated, Minimum Box dimension :1500 X1950 X600 mm (HXWXD), complete all as specified and as directed.Item continued below as srl item No.6.10 |
| 12 | Item continued from srl item No.6.00 here-in-aboveINCOMER :-1.1(a) MCCB 250 Amp, 4 pole 415 Volts with microprocessor controller of breaking capacity 36KA with adjustable thermal and magnetic settings, with Spreaders links & Rotary Handle- 01 Nos1.2 Digital MFM 96sqmm Cl 1. - 1 nos1.3 CT coil 400/5 Cl. 1, 15va tape wound - 3 nos1.4 LED Indicator 22.5mm dia RYB - 1 set1.5 MCB 32A SP 10ka 'C' series - 3 nos1.6 AXIAL FAN WITH LOUVRE, TIMER CONTROL, AUTO-MANUAL SWITCH AND MCB BACKUP PROTECTION - 2 nosOutgoing:-6.7 APFC Relay 10stage - 1 NOS6.8 Capacitors APP (2kvar x1nos, 3kvar x1nos, 5kvar x2nos, 10kvar x1nos, 15kvar x2nos, 20kvar x1nos,25kvar x 2nos) - 1 SET6.9 Capacitor duty contactors for above size ifCapacitors- 1 SETItem continued below as srl item No.6.20 |
| 13 | Item continued from srl item No. 6.00 & 6.10 here-in-above7.1 Individual MCBs to each capacitors as incomer -1 SET7.2 Backup protection high speed fuses for each line -1 SET7.3 Indicators & Push buttons- 1 SETBUSBAR :-7.4(i) Copper Bus-bar 250 Amps , supported on non hygroscopic fibres and brass screws for mounting -04 Nos- 17.5 MISCELLANEOUS Viz. wires, Sockets, terminals, din channels, nuts & bolts.-1 lot7.6 Technician charges for internal wiirng - 1 set7.7 INDOOR Electrical Panel Boards IP55 - 1 nos |
| 14 | M&L for earthing complete with GI earth plate 600mm x 600mm x 6.3 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 40 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth. |
| 15 | Supply and fixing / Laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of the following sizes, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) including taking down old cable complete all as specified and as directed. |
| 16 | (a) 25 sq mm 4 core |
| 17 | (b) 35 sq mm 3½ core |
| 18 | (c) 50 sq mm 3½ core |
| 19 | (d) 70 sq mm 3½ core |
| 20 | (e) 95 sq mm 3½ core |
| 21 | (f) 120 sq mm 3½ core |
| 22 | (g) 150 sq mm 3½ core |
| 23 | (h) 185 sq mm 3½ core |
| 24 | (j) 240 sq 3½ core |
| 25 | (k) 300 sq mm 3½ |
| 26 | (l) 400 sq mm 3½ core |
| 27 | M&L for Point wiring for socket modular type 2 in 1, 3 pin 5/15 Amp on independent board with 2.5 Sqmm PVC unsheathed copper cable using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper FRLSH conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and accessories concealed in wall/roof/floor etc, ISI marked with valid CML No. for conduits and IS:3419:1976 for conduit accessories), including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. |
| 28 | S&F modular Socket, 6/16 Amp, 2/3 pin combined 2 module, complete all as specified and as directed. |
| 29 | S&F modular switch single pole, one way, 16 Amp, 1 module, complete all as specified and directed. |
| 30 | S&F Modular Metal flush box 3 module complete all as specified and as directed. |
| 31 | S&F Modular White cover plate with frame, 3 module complete all as specified and as directed. |
| 32 | Supply, installation, testing and commissioning of wall-mounted kitchen chimney/cooker hood of Glen make, Model CH6058BLAC90 or equivalent approved make, 90 cm wide, suitable for domestic kitchen application, having minimum suction capacity of 1200 m³/hr, equipped with Auto-Clean technology, powerful motor, baffle filter system, touch control panel, LED illumination, black finish toughened glass body, low noise operation, oil collector tray, ducting arrangement complete with all accessories.Make: Glen Cooker Hood 6058 BL Auto Clean 90 cm, 1200 m³/hr(Code: CH6058BLAC90) or equivalent MES approved make as approved by accepting officer.Item continues below as srl item No.14.10 Please Enable Macros to View BoQ information |
| 33 | Supply, installation, testing and commissioning of wall-mounted kitchen chimney/cooker hood of Glen make, Model CH6058BLAC90 or equivalent approved make, 90 cm wide, suitable for domestic kitchen application, having minimum suction capacity of 1200 m³/hr, equipped with Auto-Clean technology, powerful motor, baffle filter system, touch control panel, LED illumination, black finish toughened glass body, low noise operation, oil collector tray, ducting arrangement complete with all accessories.Make: Glen Cooker Hood 6058 BL Auto Clean 90 cm, 1200 m³/hr(Code: CH6058BLAC90) or equivalent MES approved make as approved by accepting officer.Item continues below as srl item No.14.10 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender