Tender For Development Of Green Space At Sangrah Nallah Estimated Cost Lacs 97.09 ( Base Amount: 82.28 Lacs + Gst 14.81 Lacs )
Tender Value
97.09 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
2 days left
EMD
1.94 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Green Space At Sangrah Nallah Estimated Cost Lacs 97.09 ( Base Amount: 82.28 Lacs + Gst 14.81 Lacs )
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of trees for removal of roots, tree stumps, clerarance of site demolishing of temporary structures, removal of barbed wire , fencing and other allied works all complete as per the directions of incharge engineer at site ( to be paid as per actual subject to the maximum of 6 hours) |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 3 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 4 | P/ L in position cement concrete in 1:4:8(1 cement :4coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including Mechanical carriage of all materials from approved sources up to site of work complete. |
| 5 | P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including mechanical carriage of all materials from approved sources up to site of work complete. |
| 6 | Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including mechanical carriage of all materials from approved sources upto site of work complete.( All works upto plinth level) |
| 7 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 8 | Centering & shuttering including strutting, propping etc including removal of form work for Foundations,, footings, bases of columns ,ramp,steps etc. for mass concrete. |
| 9 | Centering & shuttering including strutting, propping etc including removal of form work Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 10 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge |
| 11 | Supplying, spreading filling of good earth including of all taxex with all necessary lifts , leads and carriage of material including rammimg , wateringof earth in layers not exceeding 20 cm and consoldating with 8-10 tonne road roller all complete as oper the directions of incharge engineer at site |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 13 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.7.1 All kinds of soil : |
| 14 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) with grass turf |
| 15 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete (cost of sludge, manure or extra earth to be paid for separately) |
| 16 | Supplying and planting of various plants , trees and shrbs including digging pits (300x300x450 mm size ) including refilling of pits and watering as pe directons of incharge engineer at site in polybags including all carriages and maintanance for six months |
| 17 | Kashmiri Cypress sapling of 2-'6\\" height |
| 18 | Bottle brush 4 ht, abov |
| 19 | Italian cypress 4' ht. above |
| 20 | Laurel green 4, ht, above |
| 21 | standard rose4' height |
| 22 | Oleander 3 ht. above |
| 23 | Supplying and planting of various flower seedings including watering as pe directons of incharge engineer at site in polybags including all carriages and maintanance for six months |
| 24 | Dianthus |
| 25 | Godetia |
| 26 | Birrhinium Dwar |
| 27 | Marigold |
| 28 | Gazania |
| 29 | Calandula |
| 30 | pansy |
| 31 | Providing and fixing of hybrid cast iron ornamental electric poles 3.65 m high with ornamental decorative cast iron top facing single side body duly primer coated and polyester polyurethane(As per manufactures specifications) including LED floodlight, hanging ornamental luminaries, concrete pedestal, earthwork with necessary nuts and bolts and electric fittings complete. |
| 32 | Structural steel work in built up sections,sq flats, angles etc in trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 33 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats |
| 35 | Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. |
| 36 | Providing and fixing of PVC pipe Type B of standard quality along with all fittings and fixtures 100 mm dia |
| 37 | Supply, Providing and fixing of 3 Seater Tourist Benches made of Angle Iron /Hollow Steel Section (10 Rows incl. c/o two or more coats of Paint over Priming Coat and Pling in position) with sides of cast iron frames and carraige all complete, Size shape and Design to be approved by Engineer in Charge |
| 38 | Handpacking of nallah stone in wire crates using 100 x100 mm mesh size MS wire 4mm dia including the cost of stone with all leads, lifts a upto site of work including , weaving and binding all complete as per directions |
| 39 | Providing and fixing of sighn board including Geo tagged photographs pre execuation during execution and post execuation min three at every stage all complete as per the directions of incharge engineer at site |
| 40 | Construction of Gazeboo |
| 41 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 42 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 43 | P/ L in position cement concrete in 1:4:8(1 cement :4coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including Mechanical carriage of all materials from approved sources up to site of work complete. |
| 44 | Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including mechanical carriage of all materials from approved sources upto site of work complete.( All works upto plinth level) |
| 45 | P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including mechanical carriage of all materials from approved sources up to site of work complete. |
| 46 | Centering & shuttering including strutting, propping etc including removal of form work for Foundations,, footings, bases of columns ,ramp,steps etc. for mass concrete. |
| 47 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 48 | 12mm thick cement sand palaster in 1:4 including curing |
| 49 | Providing and laying vitrified anti skid floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 50 | structural steel work in built up sections, hollow sections in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and paint all complete |
| 51 | Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. |
| 52 | P/F of 25 mm thick Kailwood ornamental type eaves boarding 300mm wide incl incl two coats coats of primer and paint with all costs and carriage complete |
| 53 | P/F of 12mm thick imported Kail wood paneling of approved pattern over and including base of 2.5\\" x 2.5\\" frame of 12mm thick plywood spaced at 300mm x 600 mm c/c and finishing exposed surface with two or more coats of touchwood polish including cost of nails, adhesive material, cornice and cornice etc. and all carriages complete |
| 54 | P/F of Anchor bolt of 16 mm dia 450 mm long including nut |
| 55 | P/F of cornice of budloo wood of size 50mm x50mm |
| 56 | Information Board |
| 57 | Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender