Tender For annual maintenance Of Office Building Sector-3, Rohtak. Providing And Fixing Of Office Almirah Of 6 X 3 And Trunk Of 4 X 2: Dismantling Of Honeycomb Hanging In Office Building: And Refilling Of Service Of Abc Stored Pressure Type Fire Exti
Tender Value
1.98 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
3960
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rohtak → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual maintenance Of Office Building Sector-3, Rohtak. Providing And Fixing Of Office Almirah Of 6 X 3 And Trunk Of 4 X 2: Dismantling Of Honeycomb Hanging In Office Building: And Refilling Of Service Of Abc Stored Pressure Type Fire Extinguisher Skg. 6 Kg And 10 Kg Capacity Filled With Isi Marked Powder Complete In All Respects In Office Building Sector-3. Rohtak And All Other Works Contingent Thereto.. -[Dnit No.-153643] A/C Rs. 1.98 Lacs E/M 3960/- Time Limit: 01 (One) Month
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of honeycomb hanging in Office Building Sector-3, Rohtak, complete in all respect. |
| 2 | Providing and fixing of Office Almirah of Size 6’ x 3’ complete in all respect. |
| 3 | Hire charges for Hydra Crane up to 40 tonne capacity and driver complete in all respect. |
| 4 | Providing and fixing of Office Trunk of Size 4’ x 2’ complete in all respect |
| 5 | Refilling of ABC Stored Pressure type Fire Extinguisher 5Kg, 6 Kg and 10Kg capacity filled with ISI Marked powder complete in all respect |
| 6 | [22.105.1]Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 1. 15 mm nominal bore |
| 7 | [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 8 | [22.24.1]Providing and fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern and C.P. flush bend with fittings and C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 1. W.C. pan with ISI marked white solid plastic seat and lid |
| 9 | [22.25.2]Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 2. One urinal basin with manually operated 5 litres PVC cistern and manually operated stop cock/ angle valve |
| 10 | [22.4]Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous chinaware Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 11 | [22.85.2]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes |
| 12 | [22.87.9]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 9. 100 mm nominal inner dia Pipes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender