Tender For Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Mark-Ii Hand Pumps And Construction Of Platforms At (16 Nos) Different Locations In District Kathua On Turnkey Basis (
Tender Value
70.47 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
7 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Mark-Ii Hand Pumps And Construction Of Platforms At (16 Nos) Different Locations In District Kathua On Turnkey Basis (Epc) Under District Capex Budget 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of 125 mm dia. bore well using ODEX Method of drilling and simultaneously driving of 125 mm dia. ERW Casing Pipe as per the strata encountered and lowering of Mark-II Hand pump along with additional riser pipes / connecting rods. Also, Construction of Cement Concrete Platform as per site conditions. The Job includes extraction of MS casing pipe if any required during the drilling work. |
| 2 | Providing of M.S.Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C-Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments. The cost includes transportation charges upto the site and 3rd party inspection charges of the material at the manufacturer end. |
| 3 | Providing of M-II Hand Pump (Extra Deep). Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3M long) and 16 nos., 3M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. |
| 4 | Providing of Riser Pipe 32 mm extra. Additional length of Riser Pipe of 03M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector. |
| 5 | Providing of connecting rod extra Additional length of connecting rods of 12mm dia. x 3M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender