Tender For Advertized Rate List/Bill Of Quantity For Contructionof Staff Hut /Office Complex And Approcah Road At Assistant Director Fisheries .........................Advertized Cost Rs.89.77 Lacs
Tender Value
89.77 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
15 days left
EMD
1.79 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List/Bill Of Quantity For Contructionof Staff Hut /Office Complex And Approcah Road At Assistant Director Fisheries .........................Advertized Cost Rs.89.77 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work. |
| 2 | Supply and filling of dry stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages. |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 9 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages. |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level uoto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages. |
| 13 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement:6 coarse sand) including all carriages complete. |
| 14 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick inc luding all carraiges. |
| 15 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate, including all carriages. |
| 16 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately).Kiln seasoned and chemically treated hollock wood including all carriages. |
| 17 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge.Klin seasoned & Chemically treated Hollock wood with all carriages. |
| 18 | Providing and fixing of float glass Panes 4 mm thick glass Panes (weight not less than 10kg/Sqm) including all carriages. |
| 19 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of 12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade-I, Type-II marked including all carriages. |
| 20 | Distempering with dry distemper of approved brand andmanufacture (two or more coats) and of required shadeon new work, over and including water thinnable priming coat to give an even shade including all carriages. |
| 21 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm), including all carriages. |
| 22 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 23 | Tower Bolt 150 mm x10mm |
| 24 | Tower Bolt 100 mm x10 mm |
| 25 | Handles 125 mm |
| 26 | Handles 100 mm |
| 27 | Hooks (100 mm) Brass. |
| 28 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 29 | Providing and fixing of Pre Colour Coated High Rib Sheet Roofing including cost of J-Hooks ,washers nails 0.50 mm thick including cost of overlapping sheets 0.50 mm (+0.05% total coated thickness with zinc coating 120 gms per sqm as per IS 277 in 240 mpa steel grade,5-7 micreon epoxy primer on both sides of sheet and Polyster top coat 15-18 micron.Sheet should have protective fim gurad of 25 micron min to avoid scratches during transporting and shall be fixed using self drilled/Self tapping screws 5.5 x55 mm with EPDM seal complete upto any pitch including all carriages with complete Job. |
| 30 | Providing and ridges and hipes of matching colour of width 60 Cm overall width plan G.S Sheets of 0.50 mm thick fixed with Polymer coated J or L Hooks ,bolts and nuts 8 mm dia GI Implet and Bitumen washers complete including all other fixtures complete Job with carriage. |
| 31 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) incld carrage of material involved. |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages. |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm, including all carriages. |
| 34 | Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including all carriages. |
| 35 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete, Fixed to steel windows by welding, including all carriages. |
| 36 | Dry random rubble masonry with hard stone in foundation and plinth.With bond stone.Quarry including all carriages. |
| 37 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position.Budloo / Fir wood including all carriages. |
| 38 | Providing and fixing of 12 mm thick Ply Board celing including cost of nails and 35 mm thick Wooden cornice but excluding cost of Supporting structure Complete Job including all carriages. |
| 39 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Phool with carriage. |
| 40 | Varnishing with varnish of approved brand and manufacture.Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish with carriage.. |
| 41 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge with carriage. |
| 42 | Providing and fixing toilet paper holder C.P. brass with carriage. |
| 43 | Providing and fixing of following PVC Pipes/Fittings of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete.100 mm. |
| 44 | Providing and fixing of following PVC Pipes/Fittings of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete.75mm. |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including all carriages. |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work-exposed on wall with clamps at 1.00 meter spacing .PN-16 pipe , 32mm OD(SDR-7.4) with all carriages complete. |
| 47 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 40mm OD(SDR-7.4) with all carriages complete. |
| 48 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-10 pipe , 50mm OD(SDR-11) |
| 49 | Providing and fixing of following PVC Pipes/Fittings of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete. 75 mm dia Floor Trap. |
| 50 | Providing and fixing of following PVC Pipes/Fittings of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete.100 mm dia |
| 51 | Providing an fixing of Plained Eaves Boarding 250 mmx 32 mm nominal size using 2nd Class Kail Wood includiing all carriage complete Job. |
| 52 | Providing and fixing of Panelling in Soffits with 12 mm thick finished Panells of knot free grade A quality over 12 mm thick Ply boards including Jam Work ,timber Sanding finishing and polishing all complete Job (Budloo) (Joists 2\\"x2\\" Budloo Wood) with carriage. |
| 53 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with carriage complete. |
| 54 | Providing and fixing of Hand Rail of Approved Size by welding etc to steel ladder railing , balcony railing ,Staircase railing and Similar works complete Job with carriage. |
| 55 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms including all carriages. |
| 56 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 with carriage. |
| 57 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including all fittings with carriage.. |
| 58 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standardshape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms with carriage. |
| 59 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required.White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps with 15 mm CP Brass single Hole Basin Mixer including all carriages. |
| 60 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms with all fittings and carriage complete. |
| 61 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm with carriage. |
| 62 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.. With common burnt clay (non modular) bricks of class designation 7.5 including all carriages. |
| 63 | Poviding and fixing of approved quality water heater (Geyzer) (Venus / Racold) brand, including standard quality fixtures and fittings etc; cost and carriage complete 50 ltr Capacity. |
| 64 | Carriage of material by Mechanical Transport including loading,unloading and stcking.Sand 20 km. |
| 65 | Carriage of material by Mechanical Transport including loading,unloading and stcking.Aggregrate 20 km. |
| 66 | Carriage of material by Mechanical Transport including loading,unloading and stcking.Bricks 60 km. |
| 67 | Contruction of Approach Road:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 68 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 69 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 70 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages. |
| 71 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages. |
| 72 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern including all carriages. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender