Tender For Restoration Of Newa Rahmoo Road Ist To 8Th
Tender Value
1.96 Crore
Estimated cost
Bid Submission
24 Jul 2026
1 days left
EMD
3.93 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Newa Rahmoo Road Ist To 8Th
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish with all leads and lifts carriage complete in -All kinds of soil. |
| 2 | Providing & laying River Bed Materail (RBM)/Nallah Muck with specified size as required incl. rolling with road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, watering and compacting to the required density including loading, unloading, and carriage of all materials to the site of work complete job. |
| 3 | Supply and stacking of graded stone agaregates at site of size range 63mm to 45mm excluding carraige quarry stone aggregates |
| 4 | Supply and stacking of graded stone screenings/chipping at site excluding carriage 13.2 mm nominal size Type A |
| 5 | Supplying and stacking of stone dust as binding material over the WBM surface including watering and rolling complete including preparation of the surface and rolling With road roller |
| 6 | Laying water bound macadam with spec. stone agg. Screening and binding material incld. Sorting screening and spreading to template and consld. With PRR of 8-10 tonne complete sub base with stone agg 63-45mm screening 13.2mm |
| 7 | Carraige of materials by mech transport from source to size for an average lead 15km |
| 8 | Stone aggregates 65mm-45mm size |
| 9 | Screening/chipping 13.2 mm size |
| 10 | Moorun/stonwe dust |
| 11 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 12 | Clearing and desilting of existing PCC/Masonary Drains of width upto 600mm by removing silt,mud,mixed soil, vegetation, Garbage and other deposited material, includingdressing the bed and sides, loading, carriage and desposal of excavatived material, complete job. |
| 13 | Scarifying the existing bitumenous road surface to a depth of 50mm and disposal of scarified material within all leads & lifts by mech means |
| 14 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge incld carriage of all materials involved complete. |
| 15 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On BT surface. @ 0.50 Kg/sqm.incld carriage of all materials involved complete. |
| 16 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On W.B.M. @ 0.75 Kg/sqm.incld carriage of all materials involved complete. |
| 17 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity..incld carriage of all materials involved complete. |
| 18 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity incld carriage of all materials involved complete. |
| 19 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.incld carriage of all materials involved complete. |
| 20 | Providing and applying 2.5mm thick road marking strips(retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 21 | Manufacturing, supplying and fixing of Retroreflecting Signage boards made of 2 mm thick Aluminium sheet confirming to class II ASTM-D4956-01 with all necessary fittings and fixtures and structural steel frame work with painting over primer surface incl. all carriages complete. |
| 22 | Mandatory/Regulatory Sign Boards |
| 23 | Cautionary/Warning Sign Boards |
| 24 | Supply and filling of Khakh bajree filling for berms incld sorting spreeding watering laying & consld with PRR of 8-10 tonne complete all carriage |
| 25 | Providing & Laying of RCC pipes in trenches in proper position including excavation of trenches refilling of excavated materials got from excavation. Providing of cushion over and under the pipes incld all carriages of pipes, loading ,unloading and stacking etc complt. |
| 26 | 12\\" Dia |
| 27 | 18\\" Dia |
| 28 | 24\\" Dia |
| 29 | 36\\" Dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender