Tender For Providing Additional Works Electrical Arrangements, To The Anganwadi Building In Andipatti Village Of Vengadasalapuram Village Panchayat
Tender Value
1.50 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
8 days left
EMD
1500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Additional Works Electrical Arrangements, To The Anganwadi Building In Andipatti Village Of Vengadasalapuram Village Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | PROVIDING ADDITIONAL WORKS ELECTRICAL ARRANGEMENTS, TO THE ANGANWADI BUILDING IN ANDIPATTI VILLAGE OF VENGADASALAPURAM VILLAGE PANCHAYAT |
| 2 | Brick work with cement mortar 1:5 mix using Country bricks for Foundation, 1 Basement and Superstructure inculding cost and conveyance of all materials to site, labour charges for curing and other incidental charges etc, complete. |
| 3 | Plastering with Cement Morter 1:5 mix, 12mm thick Smooth finish for Brick, RR masonry surface and other Concrete surfaces inculding cost and conveyance of all materials to site and all other labour charges, incidental charges etc., complete. |
| 4 | Supplying & fixing with Cuddapah slabs 20-30mm thick for Cub boards & 3 Shelfs at required location and pointed with cement mortar 1:3 including all incidental charges etc., complete. |
| 5 | Providing Aluminium Panelled Door: Providing and fixing casement doors fabricated from Aluminium sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with al thickness of Imm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. |
| 6 | Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coii) - SD 25 |
| 7 | Supply and fixing of fancy glass shade and 11W CFL for BH point - SD 80 etc., complete |
| 8 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb |
| 9 | Supply and fixing of single box type 4'40 W flu fitting complete with copper 8 choke and condensor with TW round blocks on wall or ceiling with flu tubel with PVC unsheathed Copper leads from terminals to the fitting SD 88 |
| 10 | Supply and fixing of Wall mounted fan complete with stepped electronic 9 regulator, wall clamp with side plates etc., complete. |
| 11 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed 10 Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains Over Head Mains SD 64. |
| 12 | supply and fixing of TNED meter Board sunable for 32A single phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with 11 supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. |
| 13 | Roofing with Light weight roofing materials (Galvanised Iron) Gl Sheets 12 Colour coated sheets including cost of J bolts and Bitumen washer, labour charges for fixing and all other incidental charges etc., complete |
| 14 | Special design Art work with first quality Enamel paint over two coats of Plastic Emulsion painting with best approved quality and colour paint over one coat of wall putty and one coat of primer including cost and conveyance of all materials to work site and labour charges etc., complete. (BALA Painting Renovation Work) |
| 15 | Provision for Water Supply and Sanitary disposal arrangements using PVC 14 pipes and fixtures including all materials, labour and all other incidental charges etc., complete. |
| 16 | HDPE Tank 1000Ltr |
| 17 | 32mm dia PVC Pipe |
| 18 | PVC Nalli Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender