Tender For Repair / Replacement / Re-Routing And Maintenance To Existing Water Supply Network System Accessories At Dgbr, Brar Square, Todapur, Nau Sena Bagh, Nodal Point Area, Acms Hostel And Adjoining Areas Of Age Water Supply No - I Under Ge (U) W
Tender Value
44 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
20 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement / Re-Routing And Maintenance To Existing Water Supply Network System Accessories At Dgbr, Brar Square, Todapur, Nau Sena Bagh, Nodal Point Area, Acms Hostel And Adjoining Areas Of Age Water Supply No - I Under Ge (U) Water Supply Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 metres wide and not exc1.5 metres deep for pipe line in soft/loose soil, getting out and levelling of bottom surface to required level all as specified and as directed by Engineer-in-Charge |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick all as specified and directed by Eng. In Charge |
| 3 | Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point as directed by Engr-in-Charge. |
| 4 | Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe lines including PCC (1:2:4) type B-2 (with 40 mm graded aggregate) in foundations,filling and mass concrete complete including making good the existing surface all as specified and directed. |
| 5 | Taking up DI/GI/Nidhi/CI/MS /Cemented Pipes including all fitting of the following sizes as specified and directed by Engineer-in-Charge :- |
| 6 | 80 mm bore |
| 7 | 100 mm bore |
| 8 | 150 mm bore |
| 9 | 200 mm bore |
| 10 | Supply, laying jointing, testing DI pipe with class-K-7 spigot socketed ends , conforming to IS-8329 laid in trenches of the following sizes as specified and directed by Engineer-in-Charge. (Note : Tyton Joint, Excavation & earth work shall be measured & paid separetely.) |
| 11 | 80 mm bore |
| 12 | 100 mm bore |
| 13 | 150 mm bore |
| 14 | 200 mm bore |
| 15 | Material and labour for DI specials like MJ Collars, Bends, tapers any type any radius and angle, Tee pieces single branch `Y' junction, double branch, cross (all sockets or socket and spigot) collars, DI connecting pieces one end flanged and other end spigot/socket, reducers/bell mouth pieces one end flanged and other end tapering as bell mouth for the size up to 250 mm dia bore. |
| 16 | Material and labour for Cast iron bends, tapers any type any radius and angle, Tee pieces single branch `Y' junction, double branch, cross (both all sockets or socket and spigot or flanged) collars, cast Iron connecting pieces one end flanged and other end spigot/socket, reducers/bell mouth pieces one end flanged and other end tapering as bell mouth for the size up to 250 mm dia bore. |
| 17 | Material and labour for Rubber Gasket Joint (Tyton Joint) including jointing material for DI/CI pipe of following size/bore :- |
| 18 | 80 mm bore |
| 19 | 100 mm bore |
| 20 | 150 mm bore |
| 21 | 200 mm bore |
| 22 | Material and labour including jointing and testing of cast iron sluice valves class PN-1.0, conforming to IS:14846 flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets including taking out unserviceable sluice valve and removal from site for the follwing sizes complete all as specified and directed. |
| 23 | 80 mm bore |
| 24 | 100 mm bore |
| 25 | 150 mm bore |
| 26 | 200 mm bore |
| 27 | 250 mm bore |
| 28 | Supply and fixing jointing and testing of cast iron Non return valve without by pass arrangment swing type confirming to IS 5312 flanged ends pressure rating PN 1.0 complete including taking out unserviceable NRV all as specified and as directed by Engineer-in-Charge. Note - Flanged joints complete with rubber jointing materail shall deemed to be included in the unit rate of this item |
| 29 | 80 mm bore |
| 30 | 100 mm bore |
| 31 | 150 mm bore |
| 32 | 200 mm bore |
| 33 | Material and labour for run lead joint including jointing material for cast iron pipe of following size/bore :- |
| 34 | 80 mm bore |
| 35 | 100 mm bore |
| 36 | 150 mm bore |
| 37 | Taking up old GI steel tubing with connection including fittings all as specified and as directed by Engineer-in-Charge of the follwing sizes :- |
| 38 | 15 mm bore |
| 39 | 20 mm bore |
| 40 | 25 mm bore |
| 41 | 40 mm bore |
| 42 | 50 mm bore |
| 43 | Supply & Laying of GI pipe mediun grade ISI mark including all fittings in old/new positions in trenches/wall/floor complet and making good the distributed surfaces as per existing as directed of following sizes. Note :-Excavation and earth work will be measured and paid separately. |
| 44 | 15 mm bore |
| 45 | 20 mm bore |
| 46 | 25 mm bore |
| 47 | 40 mm bore |
| 48 | 50 mm bore |
| 49 | Supply & Fixing Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed, including taking out unserviceable gate valve bore of pipe of following sizes complete all as specified and directed by Engineer-in-Charge. |
| 50 | 15 mm bore |
| 51 | 20 mm bore |
| 52 | 25 mm bore |
| 53 | 40 mm bore |
| 54 | 50 mm bore |
| 55 | Supply and installation of flanged ends strainer/dirt box, PN-1.0 with stainless steel mesh suitable for water meter for potable water supplies on up stream of water meter to avoid foreign material entering into meter including taking out unserviceable of following sizes complete all as specified and as directed at site by the Engineer-in-Charge. |
| 56 | 80 mm bore |
| 57 | 100 mm bore |
| 58 | 150 mm bore |
| 59 | 200 mm bore |
| 60 | Supply and installation of flanged ends Water Meter woltman type, including testing and making good connection with flanged ends, with gasket rubber sheet and nut & bolts etc ISI Marked fixing in horizontal / incline / vertical position, including taking out unserviceable of following sizes complete all as specified and as directed at site by the Engineer-in-Charge. |
| 61 | 80 mm bore |
| 62 | 100 mm bore |
| 63 | 150 mm bore |
| 64 | 200 mm bore |
| 65 | Supply and Fixing in replacement of CI Foot valve of following size , Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes all as specified and directed by Engineer-in-Charge. Note :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items |
| 66 | 80 mm bore |
| 67 | 100 mm bore |
| 68 | 150 mm bore |
| 69 | Construction of valves pit chamber having internal dismention 900mm x 900mm x 900 mm (internal height) using PCC (1:4:8)40 mm graded stone aggregate for foundation 15 cms thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 3mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as specified and as directed by the Engineer-in-Charge |
| 70 | Supply & Fix float valve high pressure of PTMT with epoxy coated Aluminum rod and High density plastic Ball screwed for iron pipe , including taking out float valve of following sizes complete all as specified and directed by Engineer-in-Charge. |
| 71 | 15 mm bore |
| 72 | 20 mm bore |
| 73 | 25 mm bore |
| 74 | 50 mm bore |
| 75 | Cutting and screwing the existing steel tubing 15 to 50 mm bore for addition and alteration or lengthening screw on pipe to form connector compete all as specified and as directed. |
| 76 | Material and labour for painting two coat of synthetic enamel paint as per existing pattern on pipe surface/header connection including preparation of surfaces by scratching and removing the rust, applying one coat red oxide primer complete all as specified and as directed |
| 77 | M&L for removing weeds and wild grass inside the installations using chemical spray and trimming trees and unwanted plants using petrol operated Tree/Grass cutting tools and dressing of the surface by scrapping high patches and filling low patches with the scrapping soil to give an even and neat look to the site and disposing off all the unwanted grass, bushes and debris all as directed by the Engineer-in-Charge. |
| 78 | Material and labour for MS works of any sizes of angles irons/flat iron/MS sheet works for U/S Sumps for making grills and stair steps etc. |
| 79 | Demolation in concrete cement in ground floors and paving(Road cutting) not exc 15cm thickness (Below or above the ground level) all as per specified and as directed. |
| 80 | M & L for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and as directed |
| 81 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc. |
| 82 | Brick work in CM (1:4) with sub class 'B' bricks above ground level and not exceeeding 1.5mtr in height from ground level including footing all as specified. |
| 83 | Rendering 10 mm thick plaster on brick work/concrete surface in cement mortar (1:4) finished even and smooth without using extra cement as specified. |
| 84 | S&F in replacement, butterfly valve 100mm dia with all necessary fittings including taking down old unservicable butterfly valve complete all as specified and directed by Engr-in- Charge. |
| 85 | Supplying, laying, jointing, welding and testing MS Pipe (Heavy class 'C') IS : 1239/3589, of followiing sizes laid in trenches or in Horizontal / Vertical / inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line, for following size including taking out the old unserviceable pipes. (Note:- MS Flanges incl fabrication work will be measured and paid separately.) |
| 86 | 100 mm dia |
| 87 | 150 mm dia |
| 88 | 200 mm dia |
| 89 | Supply and fixing in replacement of MS flange 100 mm bore ,16mm thick duly welded with flange joint including nuts bolts, washer, Rubber or fiber board gasket joint of size 100mm size. |
| 90 | Supply and fixing in replacement of MS flange 150 mm bore,16mm thick duly welded with flange joint including nuts bolts, washer, Rubber or fiber board gasket joint of size 150 mm size. |
| 91 | Supply and fixing in replacement of MS flange 200 mm bore, 16mm thick duly welded with flange joint including nuts bolts, washer, Rubber or fiber board gasket joint of size 200 mm size. |
| 92 | Taking down water level indicator unit from Over head reservoir/Semi Under ground sump, supply and fix new water level indicator with complete accessories such as copper ball, necessary pully, nylon rope, steel Plate duly painted white with marking at every 10cm interval, letter writing of size 15mm width and 100mm long with signal red radium paint and painting of indicator with illumination postal red paint and errected at the height of 3 meter from ground level with necessary angle, nut and bolts rightly calibrated as per the tank level all as directed by Engr-in-charge. |
| 93 | An amount of Rs 2,18,503.00 shall be deducted from BOQ on account of schedule of credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender