Tender For Repair / Maintenance Of Standby Powersupply Equipments, Automation Failure Panel, Pneumatic Pressure Pipeline & Other Misc E/M Works At Tech Area At Af Stn Tughlakabad Under Ge (Af) Tughlakabad
Tender Value
40 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Standby Powersupply Equipments, Automation Failure Panel, Pneumatic Pressure Pipeline & Other Misc E/M Works At Tech Area At Af Stn Tughlakabad Under Ge (Af) Tughlakabad
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Servicing of standby DG Set of capacity upto 30 KVA to 100 KVA complete including draining out of diesel from tank, cleaning the fuel tank thoroughly and refilling the drained out diesel, draining out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil to it’s required level, replacing the fuel filter, lubricating oil filter , Check & clean air cleaner , change air cleaner elements, Check coolant level & make up the same ,Drain the Fuel filter & water separator ,filling the starting batteries with electrolyte/Distilled water to maintain the required specific gravity, replace the u/s brass Connectors for batteries , Cleaning of Battery terminals & applying petroleum jelly to battery terminal posts & brass connectors , changing of V-belts, changing hoses and clips of air cleaner, checking of exhaust leakage, governor, breathers etc, adjust/set the same for proper functioning of DG Set, Checking of fuel, oil and water/ coolant level etc, adjusting and keeping the fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer and test for Satisfactory running of DG set for two hour at connected. load & record shall be made in respect of RPM , oil pressure, oil temp Coolant temp. Voltage, frequency , load current ,Battery charging , fuel consumption etc. as directed by the Engr in charge. Make – Kirloskar/ Cotton Greaves/ Cummins.Note :- 1. Fuel filter, lubericating filter, air filter, distill water,Engine oil, brass connector, hose pipe set will be measured and paid Separately. 2. Coolant for make up will be measured & paid separately 3. DHPP will be issued by dept for testing only. |
| 2 | All as per srl item no.1 but for 125 KVA to 160 KVA capacity DG set |
| 3 | All as per srl item no.1 but for 180 KVA capacity DG set |
| 4 | All as per srl item no.1 but for 100 KVA to 320 KVA capacity DG set |
| 5 | S&F in replacement of diesel fuel filter suitable for for 30 KVA to 100 KVA capacity DG set |
| 6 | S&F in replacement of diesel fuel filter suitable for for 125 KVA to 160 KVA capacity DG set |
| 7 | S&F in replacement of diesel fuel filter suitable for 180 KVA capacity DG sett |
| 8 | S&F in replacement of diesel fuel filter suitable for for 320 KVA capacity DG set |
| 9 | S&F in replacement of oil filter suitable for for 30 KVA to 100 KVA capacity DG set |
| 10 | S&F in replacement of oil filter suitable for for 125 KVA to 160 KVA capacity DG set |
| 11 | S&F in replacement of oil filter suitable for 180 KVA capacity DG sett |
| 12 | S&F in replacement of oil filter suitable for for 320 KVA capacity DG set |
| 13 | S&F in replacement of air cleaner filter suitable for for 30 KVA to 100 KVA capacity DG set |
| 14 | S&F in replacement of air cleaner filter suitable for for 125 KVA to 160 KVA capacity DG set |
| 15 | S&F in replacement of air cleaner filter suitable for 180 KVA capacity DG sett |
| 16 | S&F in replacement of air cleaner filter suitable for for 320 KVA capacity DG set |
| 17 | S&F in replacement of brass terminal for batteries |
| 18 | S&F in replacement of Hose pipe set suitable for DG set of capacity upto 125 KVA |
| 19 | S&F in replacement of Hose pipe set suitable for DG set of capacity 160 KVA to 180 KVA |
| 20 | S&F in replacement of DG set acoustic enclosure door lock/ door hinges suitable for capacity 30 KVA to 180 KVA complete all as specified and directed by Engr-in-charge. |
| 21 | Supply and filling lubricating oil 20W40 for DG Sets as per manufacturer's recommendation.Make - IOC/ Castrol/Hindustan Petroleum. |
| 22 | Supply and filling coolant for Radiator as per manufacturer's recommendations. |
| 23 | S&F in replacement of water pump assembly rating upto 100KVA DG set |
| 24 | S&F in replacement of water pump assembly rating upto 125 to 180 KVA Dg set |
| 25 | Servicing of 50/180 AH battery with change electrolyte,cell and l all connecting element and bettry termina complete all as specified and directed by Engr-in-charge. |
| 26 | Supply and fix in replacement of Engine safety unit (ESU) for DG set of capacity upto 180 KVA complete all as specified and directed by Engr-in-charge. |
| 27 | Supply and fix in replacement of unserviceable VAF meter including taking down unsv complete all as specified and directed by Engr-in-charge. Make:- nippon or equivalent approved by GE. |
| 28 | Supply and fix in replacement of oil sensor including taking down unsv complete all as specified and directed by Engr-in-charge. |
| 29 | Supply and fix in replacement of unserviceable water line socket for capacity upto 180 KVA including taking down unsvcomplete all as specified and directed by Engr-in-charge. |
| 30 | Supply and fixing in replacement of unserviceable Turbo charger kit upto 180 KVA DG set complete all as specified and directed by Engr-in-charge. |
| 31 | Servicing of radiator assembly by removing from engine and removing the sediments and scales, corrosion etc by means of acid cleaning and high pressure water washing and air cleaning, gas welding / soldering with good quality materiaL for stopping the leakage etc, re-assembling the same with new gaskets and transporting to the site, fixing to the engine with new clips complete as required for upto 30 to 125 KVA DG Set complete all as specified and directed by Engr-in-charge. |
| 32 | All as per srl item no.31 here in before but for 160 KVA to 320 KVA DG set. |
| 33 | Supply & fixin replacemen of new digital RPM Meter of DG Set up to 180 KVA complete all as specified and directed by Engr-in-charge Make:- Nippon or equivalent as approved by GE. |
| 34 | Supply & Fixing in replacement lead acid battery of 12 volts capacity 150 AH complete all as specfified and directed by EIC. |
| 35 | Supply & Fixing in replacement lead acid battery of 12 volts capacity 180 AH complete all as specfified and directed by EIC. |
| 36 | Supply and fix in replacement of AVR for DG set of capacity upto 180 KVA complete all as specified and directed by Engr-in-charge. |
| 37 | Supply and fix in replacement of self starter DG set of capacity upto 100 KVA complete all as specified and directed by Engr-in-charge. |
| 38 | Supply and fix in replacement of self starter DG set of capacity160 to180 KVA complete all as specified and directed by Engr-in-charge. |
| 39 | M & L for dismantling of upper cover of servo Voltage stabilizer of capacity upto 10 kVA after disconnecting electrical connections for overall servicing, cleaning of dust and replacement of complete old wiring with FRLS copper conductor of suitable size in proper layout and tight with tie, including replacement of all unserviceable parts i.e Electronic sensing card (PCB), micro processor based panel, Potentiometer, RC network with box, 6/12 pin connector, indicator, servo motor or any other parts and fixing complete including testing all as specified and directed by Engr-In-Charge.Note : (a) Replacement of any unserviceable parts will be measured and paid separately under relevant items except replacement of old wiring which are deemed to be includd in the quote rate. |
| 40 | All as per item ser No 39 here-in-above but of capacity above 10 KVA and upto 30 KVA |
| 41 | All as per item ser No 39 here-in-above but of capacity above 30 KVA and upto 50 KVA |
| 42 | All as per item ser No 39 here-in-above but of capacity above 50 KVA and upto 100 KVA |
| 43 | All as per item ser No 39 here-in-above but of capacity above 100 KVA and upto 150 KVA |
| 44 | All as per item ser No 39 here-in-above but of capacity above 150 KVA and upto 200 KVA |
| 45 | All as per item ser No 39 here-in-above but of capacity above 200 KVA and upto 300 KVA |
| 46 | All as per item ser No 39 here-in-above but of capacity above 500 KVA |
| 47 | Supply only Electronic sensing/circuit card (PCB) suitable for servo voltage stabilizers. of capcity upto 30 KVAMake - Vintek Electronics/volina |
| 48 | All as per item ser No 47 here-in-above but of capacity above 30 KVA and upto 50 KVA |
| 49 | All as per item ser No 47 here-in-above but of capacity above 50 KVA and upto 100 KVA |
| 50 | All as per item ser No 47 here-in-above but of capacity above 100 KVA and upto 150 KVA |
| 51 | All as per item ser No 47 here-in-above but of capacity above 150 KVA and upto 200 KVA |
| 52 | All as per item ser No 47 here-in-above but of capacity above 200 KVA and upto 300 KVA |
| 53 | All as per item ser No 47 here-in-above but of capacity above 500 KVA |
| 54 | Supply and fixing in replacement servo motor 3 Kg Torque suitable for servo voltage stabliser of capacity upto 50 KVA complete all as specified and directed by Engr-in-charge.. Make Vintec Electronic |
| 55 | Supply and fixing in replacement servo motor 10 Kg Torque suitable for servo voltage stablizer of capacity 100 KVA to 300 KVA. Make Vintec Electronic/volina |
| 56 | Supply and fixing in replacement Electronic Sensing / trigger transformer suitable . Make vintec electronic/volina |
| 57 | Supply and fixing in replacement digital amp meter 0-500 A suitable for servo voltage stabilizer. Make Vintec Electronic/volina |
| 58 | Supply and fixing in replacement digital voltmeter 0-500 V suitable for servo voltage stabilizer. Make AE/L&T |
| 59 | Supply and fixing in replacement RC Network suitable for 3 kg servo motor complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 60 | Supply and fixing in replacement RC Network suitable for 10 kg servo motor complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 61 | Supply and fixing in replacement Box for RC network suitable for above 10 kg servo motor complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 62 | Supply and fixing in replacement 6/12 pin as required at site as per capacity of voltage stablilizer complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 63 | Supply and fixing in replacement Carbon bush of suitable size upto the capacity of 10 KVA to 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina. |
| 64 | Supply and fixing in replacement Indicators of RYB of suitable size upto the capacity of 10 KVA to 300 KVA voltage stabilizer complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 65 | Supply and fixing in replacement PCB holder suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 66 | Supply and fixing in replacement rotary switch 5 Amp for R, Y, B phase suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 67 | Supply and fixing in replacement Microprocessor based control card suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 68 | Supply and fixing in replacement Push button switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 69 | Supply and fixing in replacement auto manual switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 70 | Supply and fixing in replacement DPDT switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 71 | Supply and fixing micro switch suitable for servo voltage stabliser upto 300 KVA complete all as specified and as directed by Engr-in-charge. Make Vintec electronic/volina |
| 72 | Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 30 KVA complete. Make- Vintek Electronics/volina |
| 73 | Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 100 KVA complete. Make- Vintek Electronics/volina |
| 74 | Material & labour for rewinding of Main Transformers with existing guage material suitable for servo voltage stabilizers of capacity 200 KVA complete. Make- Vintek Electronics/volina |
| 75 | Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 30 KVA complete. Make- Vintek Electronics/volina |
| 76 | Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 50 KVA complete. Make- Vintek Electronics/volina |
| 77 | Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 150 KVA complete. Make- Vintek Electronics/volina |
| 78 | Material & labour for rewinding of Dimmerstate (Variac) suitable for servo voltage stabilizers of capacity 300 KVA complete. Make- Vintek Electronics/volina |
| 79 | Supply and filling Transformer Oil for top up as required suitable for voltage stabilizer all as specified and directed . Make : Power oil |
| 80 | M&L for Preparation of old painted surface of Servo Voltage stabiliser by scrapping / removing old paint , dirt etc, and spray painting with two coats of blue synthetic enamel paint over a coat of primer including writing of MES / SM No of capacity UPTO 150KVA all as specified and directed by Engineer-in-charge . |
| 81 | Supply & Fixing in replacement MCCB 400 Amps 4 Pole breaking capasity 36 KA,415 V,ICS=75 % of ICU Adjustable type with fastening elements including taking down old unsv mccb, complete all as per existing type and directed by Engr-in-charge.Make:- Havells/ Standard/ Legrand |
| 82 | Supply & Fixing in replacement MCCB 160 Amps 4 Pole breaking capasity 36 KA,415 V,ICS=75 % of ICU Adjustable type with fastening elements including taking down old unsv mccb, complete all as per existing type and directed by Engr-in-charge.Make:- Havells/ Standard/ Legrand |
| 83 | Supply and fixing in replacement on-load changeover switch 200A, 415 Volts, 4 Pole incl taking down existing burnt unsv on-load changeover switch complete all as specified and directed. Make: Havells/ Standard/L&T. |
| 84 | Supply and fixing in replacement on-load changeover by pass switch 320A, 415 Volts, 4 Pole with fastening element incl taking down existing burnt unsv on-load changeover switch complete all as specified and directed. Make: Havells/ Standard/L&T. |
| 85 | Supply and fixing on-load changeover by pass switch 800A, 415 Volts, 4 Pole with fastening element incl taking down existing burnt unsv on-load changeover switch complete all as specified and directed. Make: Havells/ Standard/L&T. |
| 86 | Supply & fix in replacement three phase sliding gate motor powerful with a mximum gate weight capacity 2000 kg, 400 V-3 phase electromechanical gear motor sliding gates for industrial hangers up to 2000 kg complete with encoder,Control Unit 400 V- EVO 2000 T, magnatic limits safe and precise for slowing down in opening and closing, 50 HZ,Motor speed 52 rpm, Rated power output of motor 500 W, Output shaft height 58.5 Meter, Output torque 26 N-m, noise ≤ 60 db, Duty cycle S 2 15 Minutes, limit switches, Enviremental temperature -20 degrre C to + 40 Degree C, Gate Move speed 12 m/Min for horizontal rack and pinion including remote transmitter comlete with fixing plate and fixing screws in and including fabrication/welding work for proper alignment of rack and pinion of motor installed complete in every respect incl taking down all as specified and directed by engineer in charge. Make telcoma EVO2000 T or equivalent as approved by GE. Please Enable Macros to View BoQ information |
| 87 | Supply & fix in replacement three phase sliding gate motor powerful with a mximum gate weight capacity 2000 kg, 400 V-3 phase electromechanical gear motor sliding gates for industrial hangers up to 2000 kg complete with encoder,Control Unit 400 V- EVO 2000 T, magnatic limits safe and precise for slowing down in opening and closing, 50 HZ,Motor speed 52 rpm, Rated power output of motor 500 W, Output shaft height 58.5 Meter, Output torque 26 N-m, noise ≤ 60 db, Duty cycle S 2 15 Minutes, limit switches, Enviremental temperature -20 degrre C to + 40 Degree C, Gate Move speed 12 m/Min for horizontal rack and pinion including remote transmitter comlete with fixing plate and fixing screws in and including fabrication/welding work for proper alignment of rack and pinion of motor installed complete in every respect incl taking down all as specified and directed by engineer in charge. Make telcoma EVO2000 T or equivalent as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender