Tender For Repair And Maintenance To Runway, Dispersal Area, Thermostatic Paint, Sign Board Etc And Other Connected B/R Works Of Tech Area Of Army Avn Sqn Under Age (I) Cif (K)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
20 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Runway, Dispersal Area, Thermostatic Paint, Sign Board Etc And Other Connected B/R Works Of Tech Area Of Army Avn Sqn Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge. |
| 3 | Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. |
| 5 | Demolition of cement concrete un-reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | M&L for plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete in suken portion of slabs, complete all as specified and asdirected by the Engineer-in-Charge. |
| 7 | Machine pressed precast concrete interlocking paver block coloured of selected quality, any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 20mm thick sand filling layer including watering and consolidation, complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in coping, weathering slighting rounded or chamfered angles and throating, and use of form work (straight or curved), complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | M&L for plain cement concrete, 1:2:4, type B1 using 20mm graded crushed stone aggregate, 25mm thick, as in levelling course of flooring, complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | M&L for chequered cement concrete coloured tiles of size 20 cm x 20 cm x 25mm/ 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for preparing bituminous surface of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the line exceeding 10cm wide on roads pavement with hot applied thermoplastic road marking paint of approved white or golden yellow colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instructions, complete all as specified and directed.Note:- Make shall be as approved by AGE(I) |
| 13 | Supply and fixing road sign boards comprising of 1 plate of size 1200mm x 900mm fixed, one above the another, made of 2mm thick aluminium sheet duly framed in 40 x 40mm square MS pipe of 16 gauge & provided with 25mm x 25mm hold fasts. The plates fixed with aluminium rivets and writtern on both sides indicating the direction with single arrow on each plate with computer cut letters and signs (Reflective) as directed of appropriate size and white in colours and 12mm reflective border all round the plates over retro reflective sheeting of Avery Dennison HIP base blue. The boards (plates) supported with bolts over a pair of legs made of MS square tubes 75mm x 75mm of 16 gauge sheet of length (height) 11' each above ground including embedding in PCC (1:2:4) type B-1, blocks of size 60cm x 60cm x 75cm making post holes & earth work. The pipes to be painted with black & white Ist quality synthetic enamel paint two coats over a coat of red oxide primer (Pegged sign boards fully reflective). including removing of old sign board.Note:- Make shall be as approved by AGE(I) |
| 14 | Note :- An amount of Rs. Rs 3,200.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender