Tender For Renovation And Up-Gradation Of Women Recreation Room Including Repair And Maintenance Of Washrooms And Connecting External Sewerage System To Municipal Corporation Sewer Line In H.P. University, Shimla-5.(Sh: Civil & Public Health Work)
Tender Value
9.05 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
9 days left
EMD
18150
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Up-Gradation Of Women Recreation Room Including Repair And Maintenance Of Washrooms And Connecting External Sewerage System To Municipal Corporation Sewer Line In H.P. University, Shimla-5.(Sh: Civil & Public Health Work)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material upto all leads and lift as per direction of Engineer-in-Charge :-a) Nominal concrete 1:3:6 or richer mix(including equivalent design mix) |
| 2 | Dismantling tile work in floors/dados laid in cement mortar including stacking material upto all leads and lift as per direction of Engineer-in-Charge :-a) For thickness of tiles 10mm to 25mm |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed by the Engineer-in-Charge upto all leads and lift.a) All kind of soil. |
| 4 | Excavation in drain & channels etc. of required width for pipes in earth work including dressing of sides getting out the excavated soil and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as per direction of Engineer-in-Charge upto all leads and lift. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :a) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 6 | b) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all heights:- a) Cement mortar 1:3 (1 cement :3 coarse sand) |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position.a) 2nd Class Deodar wood |
| 9 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:-a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 10 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 11 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :-(Godrej/ jindal)a) 250x16 mm. |
| 12 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :-(Godrej/ jindal)a) 200x10 mm |
| 13 | b) 100x10 mm |
| 14 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :-(Godrej/ jindal)a) 125 mm. |
| 15 | Providing and fixing Aluminium Sheet of 22 gauge lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately). |
| 16 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).a)Dark shade pigment using ordinary cement. |
| 17 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (Kajaria/Somany/Johnson).i) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).a) Acid and alkali resistant tile. |
| 18 | b) In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).A) Acid and alkali resistant tile 10 mm thick. |
| 19 | 15 mm cement plaster on the rough/fair side of single or half brick wall of mix :-a) 1:6 (1 cement: 6 coarse sand). |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Birla/J.K) |
| 21 | Applying priming coat:-a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 22 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :- (Asian Paints/Nerolac/Dulux).a) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm. |
| 23 | b) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. |
| 24 | c) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 25 | Public Health:-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Somany/Cera/Hindware)a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rest. |
| 26 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:-(Somany/Cera/Hindware).a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (Somany/Cera/Hindware).a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. |
| 28 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Somany/Cera/Hindware). |
| 29 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Flexible pipe. i) 32 mm dia. |
| 30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 31 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 32 | Providing and fixing ISI High Pressure PVC spigot and socket soil waste and ventilating pipe including fixing with approved adhesive etc. complete:- (Supreme/ Astral/ Finolex).a) 110mm dia. |
| 33 | b) 150mm dia. |
| 34 | Providing and fixing PVC Plain Bend ISI Marked including fixing with approved adhesive etc. complete.(Supreme / Astral/ Finolex).a) 110mm dia. |
| 35 | b) 150 mm dia. |
| 36 | Providing and fixing PVC Door bend with oval access door insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. (Supreme/ Astral/ Finolex).a) 110 mm. |
| 37 | Providing and fixing PVC Collar including fixing with approved adhesive etc. complete.(Supreme/ Astral/ Finolex). a) 110mm dia. |
| 38 | b) 150mm dia. |
| 39 | Providing and fixing PVC Single Equal Branch with oval access doors, insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc complete.(Supreme/ Astral/ Finolex). a) 110mm. |
| 40 | Providing and fixing PVC Floor Trap of ISI Mark of self cleaning design including fixing with approved adhehsive , cost of cutting and making good the walls and floors etc. complete.(Supreme/ Astral/ Finolex).a) 110x90 mm |
| 41 | Providing and fixing uplasticised PVC connection pipe with brass unions :- i) 45 cm length.a) 15 mm nominal bore. |
| 42 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (Jindal/Tata/Surya ) a) 15 mm dia nominal bore. |
| 43 | Providing and fixing PTMT grating of approved quality and colour.i) Circular type.a) 100 mm nominal dia. |
| 44 | Providing and fixing brass stop cock of approved quality :a) 15 mm dia nominal bore. |
| 45 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete: - (Jindal/Tata/Surya ) a) 15 mm dia nominal bore. |
| 46 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Hindware/Cera/Parryware)a) 15 mm dia nominal bore. |
| 47 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:- (Hindware/Cera/parryware) a) 15 mm dia nominal bore. |
| 48 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :i) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :a) With common burnt clay F.P.S. (non modular bricks of class designation 7.5). |
| 49 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :a) For pipes 100 to 250 mm diameter. |
| 50 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee including cutting and threading the pipe etc. complete :a) 25 to 40 mm nominal bore. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender