Tender For Construction Of Asco Office At Kashipur, Rayagada.
Tender Value
25.02 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
10 days left
EMD
25026
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Asco Office At Kashipur, Rayagada.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of foundation in hard soil within 50m initial lead and 1.5 m initial lift |
| 2 | Filling Foundation and plinth with well graded sand including watering and ramming |
| 3 | CC 1:3:6 with 4 cm size HG metal |
| 4 | Filling the foundation with excavated earth i.e 2/3 quantity of excavated earth @ 2/3 rd rate of E,Work. |
| 5 | Fly Ash Brickmassonry (bricks 23x11x8) in c.m.1:6 in F&P |
| 6 | M -20 grade R.C.C. using 20mm&down graded chips(a) Plinth Band including Tie beam |
| 7 | (b) Footing & Column Base |
| 8 | (c)Column & Beam |
| 9 | (d) Stair Case Wall Beam 1st Floor |
| 10 | (e) Chajja |
| 11 | (f) Slab |
| 12 | (g) Stair case slab 1st floor |
| 13 | (h) Lintel |
| 14 | (i)Stair Case Ground Floor |
| 15 | Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure etc. complete. |
| 16 | Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure etc. complete. 1st Floor |
| 17 | S/F HYSD bar reinforcement Ground Floor |
| 18 | S/F HYSD bar reinforcement 1st Floor |
| 19 | 2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard granite chips |
| 20 | 16mm. thick cement plaster in c.m. 1:6 over Brick masonry G. Floor Inside |
| 21 | 16mm. thick cement plaster in c.m. 1:6 over Brick masonry 1st Floor Inside |
| 22 | 12mm. thick cement plaster in c.m. 1:6 over Brick masonry Out side (Above3 '0'' Above G.L) G floor |
| 23 | 12mm. thick cement plaster in c.m. 1:6 over Brick masonry Out side (Above3 '0'' Above G.L) 1st floor |
| 24 | 6mm thick ceiling plaster in c.m. (1:4) including closed deep chipping etc. G Floor |
| 25 | 6mm thick ceiling plaster in c.m. (1:4) including closed deep chipping etc. 1st Floor |
| 26 | Finishing surface of wall with Acrylic wall puty ( water based) of approved make G floor |
| 27 | Finishing surface of wall with Acrylic wall puty ( water based) of approved make 1st Floor |
| 28 | Wall Priming one coats on new work G floor |
| 29 | Wall Priming one coats on new work 1st floor |
| 30 | wall Painting 2 coats on new work G. Floor |
| 31 | wall Painting 2 coats on new work 1st Floor |
| 32 | Weather Coat two coat on new work Gfloor |
| 33 | Weather Coat two coat on new work 1st Floor |
| 34 | Supply fitting and fixing MS grill with Iron work wrought and put up in window grating including drilling holes in choukathas etc Ground Floor |
| 35 | Supply fitting and fixing MS grill with Iron work wrought and put up in window grating including drilling holes in choukathas etc 1st Floor |
| 36 | Enamel Painting two coats including red oxide primer of approved quality etc. complete GF |
| 37 | Enamel Painting two coats including red oxide primer of approved quality etc. complete 1st Floor |
| 38 | Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) |
| 39 | Providing and fixing Glazed Ceramic tiles in walls, dados and skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) |
| 40 | Fixing vertified tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) |
| 41 | Fixing vertified tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) |
| 42 | Providing fitting fixing AIuminium door with OEL anodized AI door |
| 43 | Supplying, fitting, fixing up window (sliding type) made up aluminium section |
| 44 | Supplying and fixing 2\\" X 2.5\\" size FRP door frame including all hardware fittings etc complete. |
| 45 | Supplying and fixing 30mm thick FRP door shutter including all hardware fittings etc complete |
| 46 | Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel etc. complete. |
| 47 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing |
| 48 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) |
| 49 | Providing fitting and fixing of false ceiling with Aluminum anodised |
| 50 | Supply, Fittings & Fixing of Well ring with cover |
| 51 | Electrical Installation |
| 52 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) Group A |
| 53 | Group B |
| 54 | Group C |
| 55 | Supplying and fixing of following MODULAR type Bell push on the existing switch box / cover including connections etc as required. as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 56 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor o f ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 57 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 58 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 59 | Recessed wiring to submain in 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 60 | Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover etc complete(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 61 | Supply and fixing of 3 pin 6Amp plug with 6Amp switch on existing board (Modular type ).(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 62 | Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) -12 Way |
| 63 | Supply and fixing of 5Amp to 32A rating 240V \\"B/C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S |
| 64 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required.(make-HPL/ Havells/ Legrand /L&T/C&S) |
| 65 | S/F of 1200mm High Speed Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton Model-Riviera High Speed, Polycab Model-Vital, Polar Model-Winpro) etc. |
| 66 | Supplying and fixing of Stepped type modular fan regulator on existing switch box / cover including connections etc as required.(make-Anchor/cona/Havels/Polycab etc.) |
| 67 | S/F of 8\\" PLASTIC VENTILLATING FAN exhaust fan (Make-Crompton Model-Jura, Polycab Model-Vital, Polar Model-Winpro) etc. |
| 68 | S/F of 1x18 Watt LED T-5 fitting(Make-Crompton/Philips/Havells/Bajaj) |
| 69 | S/F of 60 W LED Street light fitting(Make-Crompton/Philips/Havells/Bajaj) |
| 70 | MV cable laying up to 10 sq.mm 2core on surfaceLaying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 20 sq.mm on surface as required. |
| 71 | Providing and fixing M.V danger board of 250 mm x 200 mm made mild steel at least 2 mm thick and vitreous enameled white on both sides and with inscription in single red colours on front side as requred. |
| 72 | S/F of 18 Watt LED Square surface mount fitting (Make-Havells/Philips/C&S/Crompton) as requred. |
| 73 | External PHD work supply : |
| 74 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/2000 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.25mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.) |
| 75 | Fixation of J Hook in walls |
| 76 | 25mm dia UPVC ASTM Ball Valve |
| 77 | 110 mm Rigid UPVC Pipe (IS:4985-200) For Latrine Gash Pipe |
| 78 | 110mm Vent Cowl (Top of Gash Pipe) |
| 79 | Cost & Fitting Charges of 3 layer White Rotational Module Cylindrical Water Storage Tank (ISI Mark) (1000 lit.) |
| 80 | Internal PHD work supply : |
| 81 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 82 | Cutting holes through existing brickwork including making good the damages in cement mortar (1:4) |
| 83 | S/F to walls,ceiling and floor unplasticized PVC pipes15mm.dia PVC pipe [ASTM-D-1785/2004,Sch-80.]:-(per mtr.) |
| 84 | 20mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.) |
| 85 | Supplying fitting of all materials i.e (EWC With S-Trap including 10 lit.Cystern, Cover & Jet Spray) labour and T&P for fixing wash down water closet (European type W.C.) with integral \\"S\\" or \\"P\\" |
| 86 | Supplying fitting of all materials i.e (Orissa pan 23'' including 10 lit.Cystern, foot rest & Hand Spray) labour |
| 87 | Supplying all materials, & fixing glazed earthen-ware squatting urinal (ladies) plate of size (600x355mm.) including Procelain foot rest for IWC (02 No.) and Urinal waste |
| 88 | Supplying of all materials,labour and T&P for fixing of Flat Back Standing Urinal (Medium) 380x580x350including the urinal PVC waste pipe 50 mm x800 mm, |
| 89 | Supplying & Fitting, Fixing of Wash basin (22\\"x 16\\") including CP Gratting, 32mm.dia.PVC waste pipe, 15mm. dia.C.P. Bib cock (Long body) (including fixing) & CP Flange |
| 90 | Supplying & Fitting, Fixing of Pedestral Wash basin (22\\"x 16\\") including CP Gratting, 32mm.dia.PVC waste pipe, 15mm. dia.C.P. Bib cock (Long body) (including fixing) & CP Flange |
| 91 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. (CP Towel Rail (600x20) mm) |
| 92 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. (CP Towel Rail (600x20) mm) |
| 93 | Supplying all materials,labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc. |
| 94 | Providing and fixing of 15 mm CP 2 in 1 Bib Cock [including cost] |
| 95 | Providing and fixing of 15 mm CP 2 way Bib Cock [including cost] |
| 96 | 15mm dia CP Extension Piece 2\\" |
| 97 | 5\\" C.P. Grating |
| 98 | CP Flange |
| 99 | Supplying all materials,labour and T&P for fixing of Mirror (600 x 600)mm bevelled edge mirror of superior glass -wood sheet |
| 100 | Supplying all materials,labour and T&P for fixing of Framed Mirror of superior glass -wood sheet and fixed to wooden plugs |
| 101 | Fitting & fixing of 15 mm CP revolving Shower bend type arm 600x25x25mm square / Round shape with wall mounted showers including fittings of flange, 15mm.dia.C.P. stop cock, CP Gratting |
| 102 | Providing and fixing on wall face unplasticised 110mm dia OD PVC SWR S/S Pipe (ISI) (Rain Water Pipe)waste and rain water pipes conforming to IS : 13592 es |
| 103 | 110 mm dia PVC SWR Plain Bend 45'( for Rain Water Pipe) |
| 104 | 110mm dia PVC SWR Door Bend 87.5' |
| 105 | 110mm dia PVC SWR Plain Bend |
| 106 | 110 mm dia SWR PVC P Trap |
| 107 | 110mm dia PVC SWR Gully Trap |
| 108 | 110mm door Cross Tee |
| 109 | 110mm dia PVC SWR pipe clip |
| 110 | 75mm dia Plain Bend |
| 111 | 75mm dia PVC Door Bend (87.5') |
| 112 | 125mm x 75mmSWR off set BEND |
| 113 | 110 mm Door Bend Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender