Tender For Renovation And Upgradation Work Of Corridor Area, Lift Area, Foyer Area, Exterior Surface Of Building, Common Washrooms, And Construction Of Cabins On The 3Rd Floor And Other Miscellaneous Work At Suchna Bhawan, Ranchi
Tender Value
2.44 Crore
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
4.89 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Upgradation Work Of Corridor Area, Lift Area, Foyer Area, Exterior Surface Of Building, Common Washrooms, And Construction Of Cabins On The 3Rd Floor And Other Miscellaneous Work At Suchna Bhawan, Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. |
| 2 | Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 meter). |
| 3 | Using R4 series with frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height above 1.8m) |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 5 | Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mmdia wire |
| 6 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm |
| 7 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. |
| 8 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 9 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Size of Tile 600 x 1200 mm |
| 10 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab upto 0.50 sqm |
| 11 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board. |
| 12 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 13 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 14 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm. |
| 15 | Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the manufacturer’s specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge. |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 17 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 18 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 19 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 21 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm |
| 22 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 23 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm |
| 24 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 26 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., \\"p\\" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(A) 580 mm. long (c) with 10 lit. low level P.V.C. cistern |
| 27 | Providing and fixing PTMT grating of approved quality and colour. Circular type.125 mm nominal dia with 25 mm waste hole. |
| 28 | Special type C.P. Bath room Fitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) |
| 29 | (iv) Bib Cock (Long Thread) (lSl Marked) |
| 30 | (ii) Pillar Cock (Long neck) (lSl Marked) |
| 31 | (vi) Angular Stop Cock (Long Thread) (lSl Marked) |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 33 | 15 mm nominal outer dia .Pipes. |
| 34 | 20 mm nominal outer dia .Pipes. |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 36 | 25mm dia |
| 37 | 32 mm dia. |
| 38 | Making holes in walls for laying GI pipes and restoring the same as per specification and direction of E/I. |
| 39 | 125 mm thick wall |
| 40 | 250 mm thick wall |
| 41 | Providing and fixing GM non-return valve Horizontal type of approved as per specification and direction of E/I. Horizontal non-return valve 32 mm dia weight not less than 600 gm . |
| 42 | Providing and fixing GM non-return valve Vertical type of approved as per specification and direction of E/I. Horizontal non-return valve 32 mm dia weight not less than 600 gm . |
| 43 | Supplying materials and labours for construction inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l. |
| 44 | Supplying and fixing PVC fittings of approved make confirming to IS : 1729 including supplying nails and bobbins, fixing solutions including earth work or masonary work cutting and remaking and providilding as the case may be all complete as per specification and direction of E/I. ( Add 15%) |
| 45 | Slotted cowl (terminal guard) 100 mm dia |
| 46 | Floor trap - 100mm dia. |
| 47 | Ring rubber |
| 48 | Supply, fitting and fixing Central hole basin mixure without popup waste system |
| 49 | Supply, fitting and fixing Towel ring |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 51 | Providing and fixing toilet paper holder : C.P. brass |
| 52 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 53 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 54 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 55 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 56 | 75 mm diameter |
| 57 | 110 mm diameter |
| 58 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 59 | Coupler - 75 mm |
| 60 | Coupler - 110 mm |
| 61 | Bend - 75 mm |
| 62 | Bend - 110mm |
| 63 | 75 mm Shoe |
| 64 | Shoe - 110 mm |
| 65 | Single tee without door - 75mm |
| 66 | Single tee without door - 110mm |
| 67 | Carriage Of Materials |
| 68 | a) Sand Lead 10 Km |
| 69 | ( Non-Shedule Items)Supplying, fabricating and fixing at all heights wall panelling made of 12 mm thick waterproof and termite-proof board, fixed over a framework of 50 mm × 25 mm (2\\" × 1\\") aluminium hollow sections placed as required. The exposed surface shall be finished with 1.00 mm tthick decorative laminate of approved shade, texture, and make. The work shall include proper cutting, edge lipping, adhesive application, alignment, and finishing with all materials, labour, hardware, and accessories, complete in all respects as per building specification and direction of the Engineer-in-Charge. |
| 70 | Providing and fixing PVC louver panelling consisting of a base framework made of aluminium channel (38 mm × 25 mm) fixed with cleat angles (50 mm × 50 mm × 5 mm thick) and necessary hardware. Over this frame, 19 mm thick waterproof and termite-proof plywood (BWP Grade, IS:710) shall be fixed firmly to form the backing surface.Thereafter, PVC louvers of approved design, size, and shade shall be fixed over the prepared plywood surface using suitable adhesive and concealed fasteners to achieve a uniform, decorative finish. The reverse side shall receive a protective service coating to ensure durability.The rate shall include the cost of all materials, aluminium framing, plywood, PVC louvers, adhesives, hardware, labour, scaffolding, finishing, and all incidental charges, complete in all respects as per building specification and direction of the Engineer-in-Charge. |
| 71 | Providing and fixing 600 mm deep × 900 mm high below storage cabinet made of 19 mm thick BWP plywood framework with necessary ply backing, having open shelves and shutters with adjustable shelves, finished with 1 mm thick laminate of approved shade, including all necessary hardware fittings such as soft-close hinges, handles, magnetic catchers, screws and adhesives, complete in all respects as per drawing and direction of Engineer-in-Charge. |
| 72 | Providing and fixing aluminium framed cabin partition (with glass and board panelling):Providing and fixing cabin partition made with aluminium framework using rectangular hollow sections of size 50 mm × 25 mm × 1.6 mm thick, fixed securely to floor, wall, and ceiling with approved fasteners and brackets. The framework shall be spaced not more than 600 mm c/c both ways.The lower two-thirds of the partition shall be panelled on both sides with 19 mm thick waterproof and termite-proof board (BWP / HDHMR) fixed with screws and adhesive, finished with 1.00 mm to 1.25 mm thick decorative laminate of approved shade and make.The upper one-third portion shall be provided with 12 mm thick toughened clear glass fixed firmly within the aluminium framework using EPDM rubber gaskets and necessary glazing clips/beads to ensure a neat and vibration-free finish.All exposed edges shall be finished with matching aluminium trim or lipping. The rate includes the cost of all materials, aluminium framework, boards, glass, laminates, hardware, adhesive, fasteners, labour, scaffolding, and all incidental works, complete in all respects as per approved design, drawing, and direction of the Engineer-in-Charge. |
| 73 | Providing and fixing wall panelling at all heights made of 12 mm thick waterproof and termite-proof board fixed over a framework of 50 × 25 mm aluminium hollow sections placed as required. The exposed surface shall be finished with natural Indian veneer of approved shade and grain, polished with melamine finish in desired shade and gloss. The work shall include cutting, edge lipping, adhesive application, polishing, alignment, and finishing with all materials, labour, hardware, and accessories complete as per building specification and direction of Engineer-in-Charge. |
| 74 | Providing and fixing panelling over existing door and window chowkhats with 12 mm thick waterproof and termite-proof BWP grade plywood, finished with 1 mm thick suede-finish decorative laminate of approved shade. The plywood shall be fixed with synthetic resin adhesive and screws, and all exposed edges shall be properly lipped and finished. The rate includes all materials, labour, adhesives, and incidental works complete as per specification and direction of Engineer-in-Charge. |
| 75 | Providing and fixing panelling on existing door shutter with 6 mm thick BWP plywood finished with 1 mm thick decorative laminate on both sides, including hardwood lipping, fixing with adhesive and screws, and providing all fittings such as mortise lock, SS hinges, handles, tower bolts, latch, and stopper, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 76 | Providing and fixing Door Closer, designed for self-closing swing type doors weighing between 80-120 kg. This hydraulically regulated door closer has an adjustable closing and latching speed. The door closer is constructed from a one-piece aluminium die-cast body with an adjustable steel arm and comes in an attractive silver finish. auto shut machanism |
| 77 | Providing and fixing imported decorative wallpaper of approved shade and pattern over existing POP surface, including surface preparation, application of suitable primer and adhesive, proper alignment, joint finishing, and complete installation in all respects with all materials, labour, and tools as per specification and direction of Engineer-in-Charge. |
| 78 | Providing and fixing 6 mm thick exterior grade HPL panels (UV-resistant, weather-proof, fire-rated as per EN 438 / ASTM E84) of approved shade and finish over aluminium framework made of 50 × 25 × 1.5 mm sections, fixed to wall with SS anchor fasteners and cleats. Panels shall be fixed with SS self-drilling screws/rivets with neoprene washers, and joints sealed with UV-stable weather sealant. The work includes all cutting, edge finishing, alignment, scaffolding, materials, labour, and accessories complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 79 | Supplying, installing, testing and commissioning of 1.5 Ton Cassette Type Inverter Split Air Conditioner (Voltas or equivalent make such as Daikin / Blue Star / LG) suitable for 230 V ±10%, 50 Hz single-phase power supply, complete with all standard accessories as per manufacturer’s design. The work includes installation of indoor cassette unit suspended from ceiling with MS frame and vibration isolators, installation of outdoor unit on wall or floor-mounted MS frame with anti-vibration mounts, laying of refrigerant-grade copper piping (suction and liquid line up to 20 m) with closed-cell elastomeric insulation of minimum 19 mm thickness, providing interconnecting control cable, power wiring and insulated drain piping with proper supports, carrying out gas charging, vacuum testing, leak testing and complete commissioning of the system. The rate includes all fittings, supports, clamps, adhesives, consumables, labour and all materials required for satisfactory completion of work as per manufacturer’s specification and direction of Engineer-in-Charge. (Note: Point wiring and electrical power supply up to AC unit are excluded.) |
| 80 | Providing and fixing urinal partition made of 12 mm thick solid PVC board, waterproof, termite-proof, and easy to clean, of approved shade and finish, fixed with stainless steel or anodized aluminium brackets, cleats, and screws to wall and floor as required. Partition size shall generally be 900 mm high × 450 mm wide or as per site requirement. All edges shall be properly trimmed and sealed with PVC edge beading to ensure neat finish. The work includes all materials, hardware, labour, cutting, fixing, and finishing complete as per specification and direction of Engineer-in-Charge. |
| 81 | Providing and fixing standard-size undercounter vitreous china wash basin (approx. 550 × 400 mm) of approved make such as Jaquar / Hindware / Cera / Parryware / Kohler or equivalent, installed below a counter top (granite / quartz / marble as specified) using suitable stainless steel brackets, bolts, and silicone sealant to ensure a watertight finish. The work includes cutting and edge finishing of the countertop, fixing of CP waste coupling, bottle trap, flexible inlet and outlet connections, and proper jointing with the existing water supply and waste line. The rate includes the cost of all materials, fittings, labour, sealants, and finishing, complete in all respects as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 82 | Add 18 % GST |
| 83 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender