Tender For Renovation Of The Portico, Connecting Bridge, Examination Controllers Office And Computer Cell Along With Construction Of A Barrack At Jpsc Jail More, Ranchi For The Year 2026-2027
Tender Value
59.77 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
0 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of The Portico, Connecting Bridge, Examination Controllers Office And Computer Cell Along With Construction Of A Barrack At Jpsc Jail More, Ranchi For The Year 2026-2027
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 3 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 8 | Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes |
| 9 | Providing and laying in situ seven course water proofing treatmennt with APP(Atatiic poly-propylene)modifieid polymeric memberane over roof consisting of first coat of bitumen primer @ 040litre per sqm,2nd ,4th & 6th courses of bonding maataerial @ 1.20kg/sqm,which shall consist of blown type bitumen of grade 85/25 conforming to IS:702,3rd and 5th layers of roofing membrane APP modified polymeric membrance 1.5mm thick of 2.25 kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polmeric mix and the polymeric mix is kprotected on both side with 20micron HMHDPE film,7th ,the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3(1cement:3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cemennt mortar 1:3(1cement:3 fine sand) and finished neat(item of laying brick tiles shall be kpaid for separately). |
| 10 | Providing and fixing of external wall system on Ligh gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling/tapng screws/fasteners @60cm C./C oif aproved make A groove of 2mm to 3mm shall be maintained and grooves shall be sealed with silicon base d sealant.The board shall be fixed in a staggered pattern screws shall be of counter sunk rib head of 1.60mm to 4m thic or 8 to 10 gauge of length varying from 25 to 45mm aand internal face 12.5mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling/taping screws/fasterners @ 60cm C/C of approved make proper taping and jointng to the done using fiber mesh tape and epoxy and acrylic based jointing compound for seamlessfinish (cost of frame work to be paid for separately) |
| 11 | Outer face: outer face having 6mm thick cement board Type A category III as per IS: 14862:2000 fixed on 9mm thick fiber cement board Type A.category III,as per 14862-2000 (high pressure steam cured) inner Face-12.5mm thick gypsum plaster board conforminng to IS 2095-2011 fixed on 8mm thick fibre cement board of Type B,category III as per IS 14862:2000(High pressure steam cured) |
| 12 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm havingwith water absorption less than 0.5% and conforming to IS: 15622 of approvedmake in all colours and shades in for outdoor floors such as footpath, courtyard, multi modals location etc., laid on 20mm thick base of cement mortar1:4 (1cement : 4 coarse sand) in all shapes & patterns including groutingthe joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 13 | Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly |
| 14 | sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I.section of steel reinforcemenntr and cross sections of UPVC profiles to be as per design approved by E/I. wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds. |
| 15 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track,wool pile.Zinc alloy(zamak)powder coated handle on two panels along with multi-point locking system.adjustable nylon roooers withSS 304 . Using R2 series with frame(70mm & above)x(40mm & above)& both glazed and fly screen sash (25mm &above)x(50mm & above) with zinc alloy(zamak) powder coated touch locks with hook (Height upto 1.2metre) |
| 16 | Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.0mm thickness(weight not less than 12.50kg/sqm) |
| 17 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all completeWith 12 mm mild steel U beading |
| 18 | Providing and laying vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete. Glazed vitrifieid tiles Matt/Antiskid finish (size 600x600mm) |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 20 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 21 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 22 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, scaffolding raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thicness 0.50 mm (base metal of minimum o.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required. |
| 25 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500( onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) |
| 26 | providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. |
| 27 | (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 28 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 29 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 31 | Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat square bar as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials is not supplied by the deptt) |
| 32 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 33 | Providing fixing pressed steel door frame conferming to IS:4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges,jamb,lock jamb,bead and if required angle threshold of mild steel angle section 50x25mm or base tiles of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards,lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as direction of E/I. Profile-B |
| 34 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 35 | Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling and dash fasteners to be paid for separately) for fixed proper Anodised aluminium (anodised transparent or dyed to requireid shade according to IS:1868,Minimum anodic coating of grade AC 15) |
| 36 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 37 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 38 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 39 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I. |
| 40 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 41 | Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.5mm thickess after scrapping and propperly cleaning the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicone additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I. |
| 42 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 43 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all complete as per building specification and direction of E/I. |
| 44 | Providing two coats of synthetic enamel paint of approved shade and make over New wooden surface including preparing cleaning the surface after cleaning removing dirt scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 45 | Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I. |
| 46 | sand lead 8K.M. |
| 47 | chips lead 22K.M. |
| 48 | Brick lead 8K.M(1K+7P) |
| 49 | Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required. |
| 50 | group B |
| 51 | group C |
| 52 | S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required |
| 53 | 15W COB based round LED light with multiple beam angles(36 Degree) |
| 54 | Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required . |
| 55 | Wiring for circuit/submain wiring along with earth wiring with the following sizes FR PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. |
| 56 | 2x1.5sqmm+1x1.5sqmm earth wire |
| 57 | 2x2.5sqmm+1x2.5sqmm earth wire |
| 58 | S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd. |
| 59 | 5/6 Amps one way switch. |
| 60 | 15/16 amps,one way switch |
| 61 | 5/6 amps,3 socket outlet |
| 62 | S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required. |
| 63 | sUPPLYING AND FIXING MODULAR BLAMKING PLATE ON THE EXISTING MODULAR PLATAE & SWITCH BOX EXCLUDING MODULAR PLATE AS REQUIRED. |
| 64 | S/F Modular boxes,base &cover plate: Supplying and fixing following size/Modules G.I.Box along with modular base & cover plate for modular switches in recess etc as required. |
| 65 | 1 OR 2 MOODULE (78MMX78MMX45MM) |
| 66 | 6 module (78mmx205mmx50mm) |
| 67 | S/F Suitable size G.I.Box with moudular plate and cover in in front on surface of a recesses including providing and fixing 3pin 5/6 Amp Modular socket outlet and 5/6 amp.Modular switch connection as painting etc. as req. (for light plugs to be used in non residential building) |
| 68 | S/F Suitable G.I.Box with modular plac and cover in front G.I.Box on surface/ or in recess including providing and fixing 6 pin 15/16 Amp Modular socket outlet and 15/16 amp.,modular switch connection as painting etc. as req.(for light plugs tobe used in non residental building) |
| 69 | S/F Brass batton / Angle Holder including connection etc as reqd |
| 70 | I.T.C of ceiling fan including wiring the down rods of standard length(up to30cm) with 1.5 sqmFRPVC with1.5sqmmFRPVCinsulated copper conductor single core cable etc as reqd. |
| 71 | S/F the following way SP & N sheet steel M.C.B. D.B. 240 V on surface/recess complete with tinned copper busbar neutral bus bar earth plate dinbar hinged front acrylic cover from MCB knob datachable gland plate inter connection phosphatied and powder painted including earthing etc as required ( without MCB/RCCB/Insolator) |
| 72 | 12 way,Double door |
| 73 | Supply Installation,testing and commissioning of follwing size ceiling fan 3 Bleades confirming to IS:374:2019 including wiring the down rods of standard length(upto 30cm) with 1.5 sqmm FR PVC insulated ,copper wire suitable for 230V 50Hz,single phase supply etc.complete as required. |
| 74 | 1200mm(48\\") ceiling Fan |
| 75 | Supply of Bulk head 9/10 W LED |
| 76 | Providingn and fixing 6mm thick exterior gradeHPL Panels(UV-resistant,weataher proof,fire rated as per EN438/astm e84) OF APPROVED SHADE AND FINISH OVER ALUMINIUM FRAMEWORK KMADE OF 50x25x1.5mm sections,fixed to wall with SS anchor fasteners and cleats.panels shall be fixed with SS self drilling screws/rivets with neoprene washers,and joints sealed with UV-stable weather sealant.The work includ all cutting edge finishing alignment scaffolding materials labour and accessories complete as per manufacturer's specification and direction of E/I |
| 77 | Providing and fixing 16mm thick 5 layer polycarbonate sheet UV protected, of approved make (Themoclear plus or equivalent) including fixing with aluminium top & bottom profiles aluminium U channel EPDM rubber gasket self drilling tainless steel screws,and silicone sealant,complete as per manufacturer's specification and direction of Engineer-in-charge. |
| 78 | Supplying fitting and fixing of 45mm carpet Grass including all complete job as per direction of E/I. |
| 79 | Supplying fabricating and fixing at all heights wall panelling made of 12mm thick waterproof and termite proof board,fixed over a frame work of 50mmx25mm(2\\"x1\\")aluminium hollow sections placed as required,The exposed surface shall be finished with 1.0mm thick decorativie laminate of approved shade,texture,and make,The work shall include proper cutting,edge lipping adhesive application,alignment and finishing with all materials labour,hardware and accessories,complete in all respects as per building specification and direction of E/I. |
| 80 | Providing and fixing 600mmdeepx900mm high below storage cabinet made of 19mm thick BWP Ply wood frame work with necessary ply backing,having open shelves and shutters with adjustable shelves,finished with 1mm thick laminate of approved shade including all necessary hardware fittings such as soft close hinges,handles,magnetic catchers,screws and adhesives,complete in , all respects as per drawinng and direction of E/I. |
| 81 | Providing and fixing panelling over existing door and window chowkhats with 1 2mm thick waterproof and termite proof BWP grade ply wood,finished with 1mm thick suede-finish decorative laminate of approved shade.The py wood shall be fixed with synthetic resin adhesive and screws,and all exposed edges shall be properly lipped and finished.The rate includes all materials labour,adhesives and incidental works complete as per specification and direction of E/I. |
| 82 | Providing and fixing panelling on existing door shutter with 6mm thick BWP plywood finished with 1mm thick decorative laminate on both sides,including hardwood lipping,fixing with adhesive and screws,and providing all fittings such as mortise lock,SS hinges,handles,tower bolts,latch and stopper,complete in all respects as per specification and direction of E/I. |
| 83 | Providing and fixing of 8mm wooden laminate floor and skarting with 2mm thick kini Foam under layer(Make-Action ,gree,Deco foot or Equivalent)including labour charge all complete as per building specification and direction o f E/I. |
| 84 | Add 18 % GST (in Basic Rate must fill 12) |
| 85 | Add 1% Labour Cess (in Basic Rate must fill 1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender