Tender For Restoration Of Rain Damages To Water Supply Scheme Dalash In Anni Block Distt. Kullu (H.P.) (Sh:- Construction of Reinforced Cement Concrete Storage Tank 50000 Ltrs. Capacity At Village Kandagai And Dismantelling Of Random Rubble Masonery
Tender Overview
Project Description
Tender for Restoration Of Rain Damages To Water Supply Scheme Dalash In Anni Block Distt. Kullu (H.P.) (Sh:- Construction of Reinforced Cement Concrete Storage Tank 50000 Ltrs. Capacity At Village Kandagai And Dismantelling Of Random Rubble Masonery Of Storage Tank .).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work |
| 2 | Providing and laying cement concrete 1:3:6(1cement: 3sand: 6 graded stone agg.40mm nominal size) and curing complete excluding cost of centering and shuttering including all leads and lifts. a) Foundation and plinth. |
| 3 | Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in: |
| 4 | Foundations, footings, basis of columns & the like and mass concrete. |
| 5 | Wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level. |
| 6 | Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers up to floor two levels within all leads and lifts as per direction of Engineer-in-Charge. |
| 7 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work including all leads and lifts: |
| 8 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc upto 200 mm in thickness with in all leads and lifts as per direction of Engineer-in-Charge. |
| 9 | Vertical surfaces such as walls (any thickness)portions and the like including attached pilaster buttresses plinth and string course and the like |
| 10 | Providing Placing &Laying mild /tor steel reinforcement for RCC. work including bending, binding and placing in position complete up to floor two level including all leads and lifts.: a) Tor steel |
| 11 | Providing and fixing manhole cover with angle iron in frame of The internal size of cover 450 mm x610 mm x 100 mm including providing & fixing of MS Angle iron frame of suitable size with ISA 50x50x4 mm complete with hold fasts & two handle & one coat of red oxide paint with in all leads & lifts & as per the entire satisfaction & direction of the Engineer-in-charge. |
| 12 | Laying and Jointing G.I. Pipes (light grade),tube fittings in trenches I/c earth work complete:- |
| 13 | 32 mm dia Inlet & outlet and scour pipe |
| 14 | Providing & fixing brass full way with hand wheel of following nominal bore complete in all respect to the entire satisfaction of the Engineer-in-Charge. |
| 15 | 32 mm dia |
| 16 | Providing and fixing GMS Ventilating pipe 50mm dia, 1mtr. Height with C.I Cowl fixed at top including all fitting requirement complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge. |
| 17 | Dismentaling R/R work i/c stacking of serviceable material with 20 mtrs leads within all leads and to the entire satisfaction of the Engineer-in-Charge.(Vertical wall & base) |
| 18 | Dismentaling RCC work i/c stacking of serviceable material with 20 mtrs leads within all leads and to the entire satisfaction of the Engineer-in-Charge. (Slab) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender