Tender For Construction Of Asco Office At Dabugaon, Nabarangpur.
Tender Value
25.04 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
4 days left
EMD
25041
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nabarangpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Asco Office At Dabugaon, Nabarangpur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jul-2026 | corrigendum | Other | 20-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of foundation in hard soil within 50m initial lead and 1.5 m initial lift |
| 2 | Filling Foundation and plinth with well graded sand including watering and ramming |
| 3 | CC 1:3:6 with 4 cm size HG metal |
| 4 | CC 1:2:4 with 12mm size HG metal chips |
| 5 | Fly Ash Brickmassonry (bricks 23x11x8) in c.m.1:6 in F&P |
| 6 | M -20 grade R.C.C. using 20mm&down graded chips as per EIC(a) Plinth Band including Tie beam |
| 7 | (b) Footing & Column Base |
| 8 | (c)Column & Beam G. Floor |
| 9 | (d)Column & Beam 1st. Floor |
| 10 | (e) 65 mm avg. Chajja G. Floor |
| 11 | (f) 65 mm avg. Chajja 1st Floor |
| 12 | (g) Roof slab G. Floor |
| 13 | (h) Roof slab 1st. Floor |
| 14 | (i)Lintel |
| 15 | (j)stair case |
| 16 | Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure G. Floor etc. complete. |
| 17 | Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure etc. complete. 1st Floor |
| 18 | S/F HYSD bar reinforcement incl. cost of binding wire 18 to 20 gauge as per Engg.-in-charge Ground Floor |
| 19 | S/F HYSD bar reinforcement incl. cost of binding wire 18 to 20 gauge as per Engg.-in-charge 1st Floor |
| 20 | 20 mm thick grading plaster in C.M(1:4) on roof slab & Chajja as per EIC G. Floor |
| 21 | 20 mm thick grading plaster in C.M(1:4) on roof slab & Chajja as per EIC 1st. Floor |
| 22 | 16mm. thick cement plaster in c.m. 1:6 over Brick masonry G. Floor |
| 23 | 16mm. thick cement plaster in c.m. 1:6 over Brick masonry 1st Floor |
| 24 | 12mm. thick cement plaster in c.m. 1:6 over Brick masonry G floor |
| 25 | 12mm. thick cement plaster in c.m. 1:6 over Brick masonry 1st floor |
| 26 | 6mm thick ceiling plaster in c.m. (1:4) including closed deep chipping etc. G Floor |
| 27 | 6mm thick ceiling plaster in c.m. (1:4) including closed deep chipping etc. 1st Floor |
| 28 | Finishing surface of wall with Acrylic wall puty ( water based) of approved make incl. cost of scaffolding staging, material cost. G floor |
| 29 | Finishing surface of wall with Acrylic wall puty ( water based) of approved make incl. cost of scaffolding staging, material cost. 1st floor |
| 30 | Wall Priming one coats on new work as per EIC Gfloor |
| 31 | Wall Priming one coats on new work 1st floor |
| 32 | Wall Painting two coats with plastic emulsion paint on new work G. Floor |
| 33 | Wall Painting two coats with plastic emulsion paint on new work 1st. Floor |
| 34 | Wall painting with Weather Coat two coat on new work Gfloor |
| 35 | Wall painting with Weather Coat two coat on new work Gfloor |
| 36 | Supply fitting and fixing MS grill with Iron work wrought incl. fitting, fixing & grating including drilling holes in RCC, Brick works as per EIC Ground Floor |
| 37 | Supply fitting and fixing MS grill with Iron work wrought incl. fitting, fixing & grating including drilling holes in RCC, Brick works as per EIC 1stFloor |
| 38 | Enamel Painting two coats over one coat of primer of approved quality including red oxide primer of approved quality etc. complete GF |
| 39 | Enamel Painting two coats over one coat of primer of approved quality including red oxide primer of approved quality etc. complete FF |
| 40 | S/F coloured virtified industrial tiles having thickness 8 mm to 10 mm of size 300 mm x 300 mm of approved make confirming to IS:4457 laid on 25 mm thick CM (1:1) and filling joints with neat cement slurry incl. cost of material, labour, rubbing, polishing, T & P as per EIC |
| 41 | S/F Floor tiles in floors, treads or steps and landings on 25 mm thick CM (1:1) and filling joints with neat cement slurry incl. cost of material, labour, rubbing, polishing, T & P as per EIC |
| 42 | Fixing vertified tiles in floors of size 600mm x 600mm of approved make conforming IS:13755 laid on 20 mm thick CM (1:4) and filling joints with white cement of approved quality as per EIC |
| 43 | Fixing vertified tiles in dados, skirting and risers of steps on 12 mm thick CM (1:3) jointed with neat cement slurry mixed with pigments to match shade of tiles incl. rubbing and polishing as per EIC |
| 44 | Fixing ceramic glazed wall tiles in dados, skirting and risers of steps on 12 mm thick CM (1:3) jointed with neat cement slurry mixed with pigments to match shade of tiles incl. rubbing and polishing complete as per EIC |
| 45 | 30 mm thick FRP flsuh door shutter in different plain and wood finish made with fire retardant grade unsaturated polyster resin, moulded to 3 mm thick FRP laminate all around, with wooden blocks inside at required places for fixing of PUF/ Polystyrene foam to be used as filler material through out the hollow panel, casted monolithically with testing parameters of FRP laminate confirming to table -3 of IS: 14856, complete incl. P/F factory made door frame (single rebate) made out of single piece extruded solid PVC foam with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, incl. fixing the frame to wall with suitable dia, length anchor fastener as per manufacturer specification and direction of E-I-C |
| 46 | S/F of 32 mm thick flush door shutter of 30 mm thick BWR block board pasted with1 mm thick sunmica on both side of approved design and quality as per EIC |
| 47 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of sixe 32x32x2 mm @ 0.9 m C/C and stainless square pipe bracing of size 32x32x2 mm in 3 rows in their case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials with cost, T&P in all respect as per EIC |
| 48 | S/F of two tarck UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittingsetc. As per EIC. |
| 49 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I.wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230mm c/c, including jointing and finishing to a flush finish. |
| 50 | Electrical Installation |
| 51 | S/F Modular type Bell push on the existing switch box/ cover incl. connection etc as per EIC (Make- Finolex / L & T/ Anchor/ V Guard/ Havells) |
| 52 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated 2 X 2.5sq.mm +1 X 1.5sqmm |
| 53 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 54 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 55 | S/ F of 3 nos of 3 pin 5/6 amp modular socket and SP 5/6 amp one way modular switch, 1 no of 5 pin 15/16 socket outlet and sp 15/16 amp one way modular switch on modular GI box with modular base and cover etc(Make- Finolex / L & T/ Anchor/ V Guard/ Havells) |
| 56 | S/F of 3 Pin 6 amp plug with 6 amp switch on existing board modular type(Make of wire- Finolex / L & T/ Anchor/ V Guard/ Havells) |
| 57 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S/Benlo.)4way,Double door |
| 58 | Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads(make-HPL/ Havells/Legrand /L&T/C&S/Benlo)Single pole (SP) 5 to 32Amp B Series |
| 59 | Earthing with GI earth pipe 3 meter long 40 mm dia ISI marked incl. acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as req. ( Make- HPL/ Havells/ Legrand/ L&T/ C&S |
| 60 | A.C Ceiling fan 1200 mm size Aluminium body, Copper winding. (Make-Crompton- Rivera High speed, Polycab - Vital, Polar- Wipro) |
| 61 | Supply and fixing of stepped type modular fan regulator Electronics step type on existing switch box/ cover incl. connections (make- Cona/ Anchor/ Havells/ Polycab |
| 62 | Exhaust fan 8\\" size of Plastic with making hole of required size. (Make & Model-Crompton-Jura/ Polycab-Vital/ Polar- Wipro). |
| 63 | S/F 1x18 Watt LED T-5 fitting (Make- Crompton/ Phillips/ Havells/ Bajaj) |
| 64 | S/F 60W LED street light (Make- Crompton/ Phillips/ Havells/ Bajaj) |
| 65 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked (Make of wire-Finolex/L&T/Anchor/Havells/V- Guard/Great White/HPL)Group-A |
| 66 | Group-B |
| 67 | Group-C |
| 68 | MV Cable laying upto 10sqmm 2 core on surface laying and fixing of one number of PVC insulated and PVC seathed/ XLPE power cable 1.1 KV grade of size nt exceeding 20 sq mm on surface as required |
| 69 | Supply and fixing MV danger board of 250x 200mm made mild steel atleast 2 mm thick and vitreous enamelled white on both sides with inscription in single red colours on front side as req. |
| 70 | S/F of 18 W LED square surface mount fittings (Make- Havells/ Phillips/ C&S/ Crompton) |
| 71 | Supplying, Installation, Testing and commissioning of 63 amp TPN switch of following capacity(IS13940 part 3/1993) on surafce with HRC Fuse links, interconnection and earthing etc (Make-SEIMENS/HPL/ANCHOR/L&T/HAVELLS/C&S/RK) |
| 72 | Supply & fixing of 3 star rated Split type A.C. Machine (Make: Carrier/Voltas/ Hitachi/ Bluestar) (1.5 Ton) |
| 73 | S/F of 4KVA Voltage stabilizer (90V - 300V) Model- VEW 400 Plus (Make:- V-Guard) |
| 74 | S/F of extra copper pipe with Nylon insulation etc |
| 75 | S/F of Angle frame for installation of outdoor unit for A.C. Machine |
| 76 | Internal PHD work supply : |
| 77 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 78 | Cutting holes through existing brickwork including making good the damages in cement mortar (1:4) |
| 79 | Cutting holes in RCC floors and roofs upto 19 cm thick for passing GI/PVC pipes and ftting etc and preparaing the holes after insertion of pipe etc with CC 1:2:4 incl finishing it leakproof |
| 80 | providing, fixing on wall face unplasticized Rigid PVC soil, waste and Rain water pipes confirming to IS:13592 type A incl. jointing with seal ring confirming IS: 5382, leaving 10 mm gap for thermal expansion (i) single socketed pipes compl. Asper EIC 75 mm OD PVC SWR S/Spipe(ISItype-A) |
| 81 | 90 mm OD PVC SWR S/S pipe( ISI type A for rain water) |
| 82 | 110 mm OD PVC SWR S/S pipe( ISI type A for rain water) |
| 83 | Laying in trenches unplasticized PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes incl. jointing125 mm dia rigid UPVC pipe class-3 (0.6Mpa) |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge20 mm dia pipe |
| 85 | 25 mm dia pipe |
| 86 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansios etc complete as per direction of Engineer-in-Charge75 mm dia PVC SWR coupler |
| 87 | 90 mm dia PVC SWR coupler |
| 88 | 110 mm dia PVC SWR coupler |
| 89 | single tee with door 75x75x75 mm dia PVC SWR Tee |
| 90 | 90x90x90 mm dia PVC SWR Tee |
| 91 | 110x110x110 mm dia PVC SWR Tee |
| 92 | 75 mm dia PVC SWR plain bend 87.5 |
| 93 | 90 mm dia PVC SWR plain bend 87.5 |
| 94 | 110 mm dia PVC SWR plain bend 87.5 |
| 95 | 75 mm dia PVC SWR plain door bend 87.5 |
| 96 | 90 mm dia PVC SWR plain door bend 87.5 |
| 97 | 110 mm dia PVC SWR plain door bend 87.5 |
| 98 | Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. etc complete as per direction of Engineer-in-ChargeP Trap |
| 99 | S Trap |
| 100 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification all etc. complete as per direction of Engg. in charge. |
| 101 | Fixing wash down water closet (Europian type WC ) with integral 'S' and 'P' trap to the floor with wooden plug and chromum plated screw including jointing the trap including eat cover all etc. complete as per direction of Engg. in charge.White EWC with S trap & seat cover5 |
| 102 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixers etc. complete as per direction of Engg. in charge. |
| 103 | Fixing Wash Basin with hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damages etc. complete as per direction of Engg. in charge.For Wash RoomPorcelain 22\\"x 16\\"(550x400) W.H.B with pedestal |
| 104 | Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556- Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification etc. complete as per direction of Engg. in charge.One-seated Urinal 1m x 0.50m x 0.15m size |
| 105 | Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.etc. complete as per direction of Engg. in charge.Porcelain Flat back standing Urinal (Small) 430 x 260 x 350 with Waste Pipe |
| 106 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specificationetc. complete as per direction of Engg. in charge. |
| 107 | Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specificationetc. complete as per direction of Engg. in charge. |
| 108 | Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.15 mm short body bib cock |
| 109 | 15 mm long Body Bib Cock |
| 110 | Fixing of Brass Screw-down Angle/Counseales stop cock Cocks polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.15 mm dia CP brass Angle stop cock |
| 111 | 20 mm dia CP brass concealed stop cock |
| 112 | Fixing of Brass 15mm dia CP flange of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge. |
| 113 | Fixing Bib Cock capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification etc. complete as per direction of Engg. in charge.15 mm dia cp pillar cock with swinging spout |
| 114 | cp revolver shower (bend type) |
| 115 | cp health faucet with 1.0mtr PVC tube |
| 116 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specificationetc. complete as per direction of Engg. in charge. |
| 117 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. complete as per direction of Engg. in charge. Towel rail (600x20)mm |
| 118 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.CP glass self with glass |
| 119 | Fixing (a) Liquid Soap Container – Glass container or Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brass screws or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge. |
| 120 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification complete as per direction of Engg. in charge.2000 ltr capacity double layer cylindrical vertical water storage tank |
| 121 | Supply , fitting and fixing of following fixers including all materials and labours etc all complete as per specification complete as per direction of Engg. in charge.450x450 mm square man hole cover-16.0 kg |
| 122 | 90mm dia P.V.C. Nahani Trap |
| 123 | 110mm dia PVC SWR Single Y with door |
| 124 | PVC SWR Jalli 110mm dia |
| 125 | 110 mm dia P.V.C. SWR Vent Cowl |
| 126 | UPVC BALL VALVE Sch-80 (Solvent Welded with Metal Ball)25mmdia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender