Tender For Construction & Furnishing Of Newly Constructed Asco Office At Podia With Boundary Wall, Water Supply, Electrification And Peripheral Development.
Tender Value
11.98 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
9 days left
EMD
11988
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malkangiri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction & Furnishing Of Newly Constructed Asco Office At Podia With Boundary Wall, Water Supply, Electrification And Peripheral Development.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork Excavation of foundation in hard soil within 50m initial lead and 1.5 m initial lift |
| 2 | Filling Foundation and plinth with well graded sand including watering and ramming |
| 3 | CC 1:4:8 with 4 cm size HG metal in F&P |
| 4 | Fly Ash Brickmassonry (bricks 23x11x8) in c.m.1:6 in F&P |
| 5 | M -20 grade R.C.C. using 20mm&down graded chips(a) Plinth Band including Tie beam |
| 6 | (b)Column Base |
| 7 | (c)Column |
| 8 | Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure etc. complete. Ground Floor |
| 9 | Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure etc. complete. 1st Floor |
| 10 | S/F of uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 11 | Angle of 50x50x5 mm size |
| 12 | 15 cm deep brick coping 23cm to 25cm thick walls including plastering (1:4) complete |
| 13 | 6mm. thick cement plaster in c.m. 1:4 over RCC surfaces |
| 14 | 12mm. thick cement plaster in c.m. 1:6 over Brick masonry Out side (Above3 '0'' Above G.L) G floor |
| 15 | 12mm. thick cement plaster in c.m. 1:6 over Brick masonry Out side (Above3 '0'' Above G.L) 1st floor |
| 16 | Scraping old paint with scrapers, sand papering and washing with soap water or soda incl. scaffolding charges upto 5m height per sqm |
| 17 | Finishing walls with Acrylic wall putty |
| 18 | Wall Priming one coat with wall cement primer water bound etc. complete |
| 19 | Finishing walls with water proofing weather coat paint of approved shade on new work to give even shade 2 coats Data for 10sq.m |
| 20 | Cement concrete(1:2:4) with 12mm hard granite chips(crusher broken) |
| 21 | Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement proportion (3:1) including cleaning before pouring 12mm to 25mm and 15cm depth. |
| 22 | Supplying of 100mm outer to outer nominal size dia. G.I. pipe conforming to IS:1239.1:2004 (medium) including cost, carriage etc. |
| 23 | Supply fitting and fixing GI square Bar grill, iron beam in cow catcher, cow catcher with all cost of labour materials etc. as per direction of Engg-in-Charge |
| 24 | Priming one coat with any approved red oxide over steel work |
| 25 | Painting two coats with any approved paint including cost of paints over iron works. |
| 26 | Fixing granite tiles of 0.10 Sqm. & upto 0.4 Sqm. (10mm. thick) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, poloshing complete excluding cost of tiles etc. complete as per direction of Engg-in-Charge . (a) Ground floor |
| 27 | (b) First floor |
| 28 | Supplying, fitting and fixing of out door Acrylic letter including labour charges |
| 29 | Barbed wire 4pin 2 ply in 4 rows at 0.3m spacing over top of the wall |
| 30 | Labour for fixing barbed wire fencing and post by means of staples and straining hooks by means of tying with G.L wire and including cost of staples, hooks and tying wires |
| 31 | Providing and fixing concertina coil fencing with punched tape concertina coil 600mm diameter 10m openable length(total length 90m), having 50 nos rounds per 6m length,upto 3m height of wall within existing angle iron (Y\\") shaped placed 2.4m or 3m apart and with 9 horizontal R.B.T reinforced barbed wire,stud tied with G.I staples and G.I clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per direction of Engineer-in-charge,with reinforced barbed tape(R.B.T)/Spring core (2.5mm thick) wire of high tensile strength of 165kg/sq.mm with tape(0.52 mm thick) and weight 43.478 gm/m(Cost of MS Angle and CC Block Separately) |
| 32 | S/F of roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.6 mm thick fabric of approved design as per EIC |
| 33 | Labour for drilling a perfectly vertical bore well of 200mm dia below ground level by use of own rig with its accessories, tools and plant and consumables etc for lowering of PVC casing fitted with socket and with or without well screen as per the necessi |
| 34 | Labour for drilling a perfectly vertical bore well of 150mm dia below ground level by use of own rig with it accessories, tools and plant and consumables etc for lowering of PVC casing fitted woth socket and with or without well screen as petr the necessi |
| 35 | Cost of 200mm dia pvc (Sch.-80) casing pipe of reputed make as per ASTM1785/2004 specification. Manufacturer name should prominently be marked with CIPET cerficate in body of pipe in indeliable ink stenciled to the satisfaction of Engineer-in-charge with |
| 36 | Cost of lowering of casing pipe (200mm dia PVC pipe) |
| 37 | Cleaning and developing the tube well using their own compressor continuousely worked till clear and adequate discharge ois obtained from the well including supply and use of all necessary equipments and labour as per the direction of enginbeer-in-charge. |
| 38 | Fitting and fixing of 2 hp submerssible pump of any approved make with ISI mark complete |
| 39 | Fitting and fixing of stay wire of any approved make with ISI mark complete |
| 40 | Fitting and fixing of 2.5mm Cable of any approved make with ISI mark complete |
| 41 | Fitting and fixing of panel board of any approved make with ISI mark complete |
| 42 | Laying in trenches High Density Polyethylene Pipes conforming to IS 4984 - 1995 and Specials of 40mm outside diameter and Class-1 to Class-3 and jointing by Fusion welding method including testing as per specification complete. |
| 43 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings 25mm dia |
| 44 | Accessories of pump fitting (reducer, nipple, short piece, bore cover) upto overhead tank |
| 45 | Installation charges for pumpset, control panel and accessories |
| 46 | Transportation of all PVC pipes, pump, accessories and fittings Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender