Tender For Comprehensive Maintenance Including B/R & E/M Nature Of Works I.E. Water Proofing Treatment, Joinery Sunken Floors, Flooring, Tiling, Various Toilet Fittings Plumbing, Sanitary Fittings Internal Wiring And Misc Works And Other Misc B/R Wor
Tender Value
20 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
19 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Including B/R & E/M Nature Of Works I.E. Water Proofing Treatment, Joinery Sunken Floors, Flooring, Tiling, Various Toilet Fittings Plumbing, Sanitary Fittings Internal Wiring And Misc Works And Other Misc B/R Works In Office Accn Of Pao (Ors) And Residential Accn Of Pao (Ors) Lekhanagar Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and as directed. |
| 2 | Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and as directed. |
| 3 | Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed. |
| 4 | S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 5 | All as per item no.08081 but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and as directed. |
| 6 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and as directed. |
| 7 | S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 8 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 9 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge complete all as specified and directed |
| 10 | Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge complete all as specified and directed |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed. |
| 12 | M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed |
| 13 | S & F Solid PVC wall lining consisting of 5 mm thcik plain/wood grain printed colour PVC sheet inclusive cement and fixing at ste on PVC frame as per specified and drgs complete all as specified and as directed. |
| 14 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 16 | M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 17 | S&F toughned glass 12 mm thick as in hinged doors, partition automatic doors and similar work incl cutting to shape ,drilling holes reqd complete all as specified and as directed. |
| 18 | S&F Butt hinges medium weight cold rolled stainless / Mild steel 100mm size complete all as specified and as directed. |
| 19 | Supply & fixing 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed |
| 20 | Supply & fixing 150 mm Aluminium pressed handles fixed complete all as specified and directed. |
| 21 | S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 22 | S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished complete all as specified and as directed. |
| 23 | S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as specified and as directed. (thickness or powder coating not less than 50 micron) |
| 24 | S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 25 | S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 26 | S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 27 | Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 28 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. |
| 30 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 31 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 32 | Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. |
| 33 | Materials and labour for Non Skid ceramic tiles 7-8 mm thick (square/rectangular), polished, area of each tiles Exc 0.11 Sqm and n.exc 0.36 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. |
| 34 | S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and as directed. |
| 35 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and as directed. |
| 36 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 37 | All as per item No 36 here-in-above but half brick wall in CM 1:4. complete all as specified and as directed. |
| 38 | Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed |
| 39 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 40 | Material & labour for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.(WPC shall be measured and paid separately.) |
| 41 | Supply only liquid water proofing compound complete all as specified and directed. |
| 42 | M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 43 | Preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of Chalk whiting all as specified and directed. |
| 44 | M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed. |
| 45 | M & L for preparation of new plastered surfaces of wall and applying three coats of white wash in ceiling complete all as specified and directed |
| 46 | Taking up or down steel tubing 15 mm bore and connection complete all as specified and as directed. |
| 47 | Taking up or down steel tubing 20 mm bore and complete all as specified and as directed. |
| 48 | Supplying and laying of CPVC pipes 16 mm bore SDR 11 & Plain CPVC SDR 11 fittings in trenches and including taking up or down steel tubing and connection complete all as specified and as directed. |
| 49 | Supplying and laying of CPVC pipes 20 mm bore SDR 11 & Plain CPVC SDR 11 fittings in trenches and including taking up or down steel tubing and connection complete all as specified and as directed. |
| 50 | S & F Brass Elbow 16 mm for CPVC pipes complete all as spd and directed. |
| 51 | S & F Brass Elbow 20 mm for CPVC pipes complete all as spd and directed. |
| 52 | S & F Brass Tee 16 mm for CPVC pipes complete all as spd and directed. |
| 53 | S & F Brass Tee 20 mm for CPVC pipes complete all as spd and directed. |
| 54 | S & F Brass Union 16 mm for CPVC pipes complete all as spd and directed. |
| 55 | S & F Brass Union 20 mm for CPVC pipes complete all as spd and directed. |
| 56 | S & F Brass Ball Valve 16 mm for CPVC pipes complete all as spd and directed. |
| 57 | S & F Brass Ball Valve 20 mm for CPVC pipes complete all as spd and directed. |
| 58 | Supply & fixed in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device,complete all as specified and directed. |
| 59 | S & F in repairs vitreous china white squatting pan \\"Orissa Pattern\\" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete, all as specified and directed. |
| 60 | S & F 32 mm dia PVC waste pipe fixed in repairs complete all as specified and as directed. |
| 61 | S&F in repair Vitreous China wash basin, white,with padestal flat back, size 540x400mm excluding ditto but including brackets and padestal etc complete all as specified and as directed. |
| 62 | S & F in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and as directed. |
| 63 | S&F in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 64 | S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. |
| 65 | S&F in repair Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,fancy type screwed for iron pipe and fixed, complete all as specified and directed. |
| 66 | S & F in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete all as specified and as directed. |
| 67 | S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head,complete all as specified and directed. |
| 68 | S & F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and as directed. |
| 69 | S&F in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and as directed. |
| 70 | S&F in repairs 2-way bib cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed. |
| 71 | S & F in repair health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and directed. |
| 72 | S & F in repair jet spray (butterfly) with 1.5 mtrs tube with complete all accessories complete all as specified and as directed. |
| 73 | S &F Tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed. |
| 74 | S&F in repairs towel rack complete all as specidied and directed. |
| 75 | S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed. |
| 76 | S&F as in repair stainless steel kitchen plate rack of size 80x55x20 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. |
| 77 | S & F waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and as directed. |
| 78 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solventcement complete all as specified and directed. |
| 79 | S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specifed and directed complete all as specifed and directed. |
| 80 | S & F in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed. |
| 81 | S&F in repair PVC (SWR) Bends any radius for 110 mm bore complete all as specified and directed |
| 82 | S&F in repair PVC (SWR) Bends any radius for 75 mm bore complete all as specified and directed |
| 83 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and directed |
| 84 | Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed |
| 85 | S & F 500 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 86 | S & F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 87 | M & L Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed. |
| 88 | S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. |
| 89 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed |
| 90 | S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 91 | S&F in repairs CP soap dish with glass complete all accessories complete all as specified and directed. |
| 92 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 93 | M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor complete all as specified and directed. |
| 94 | M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed |
| 95 | Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing , etc, complete as per manufacturers specifications. |
| 96 | Built in steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing. |
| 97 | S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets,stops,rollers etc complete all as specified and directed |
| 98 | Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specified and directed |
| 99 | Taking down sheet metal enclosure DB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed |
| 100 | Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces. |
| 101 | M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete including dummy switches wherever required all as specified and making good disturbed surfaces applying putty /distemper/white washing etc for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 102 | All as per Item No. 102 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed |
| 103 | All as per Item No. 102 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed |
| 104 | All as per Item No. 102 above but One 3 pin 5 amps socket out let point on independent board and wiring with 1.5 sqmm multistranded copper wire and earth wire of 1.5 sqmm multistranded copper wire complete all as specified and directedNote : There shall be separate circuit for independent board |
| 105 | All as per Item No. 102 above but One bell/buzzer point controlled by one bell push complete all as specified and directed |
| 106 | All as per Item No. 102 above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and directed |
| 107 | All as per Item No. 102 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed |
| 108 | All as per Item No. 102 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and directed |
| 109 | M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit/ PVC Casing and Caping not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm, PVC modular boxes on wall/ iron structure for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete including dummy switches wherever required all as specified and making good disturbed surfaces applying putty /distemper/white washing etc for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 110 | All as per Item No. 109 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed |
| 111 | All as per Item No. 109 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed |
| 112 | All as per Item No. 109 above but One 3 pin 5 amps socket out let point on independent board and wiring with 1.5 sqmm multistranded copper wire and earth wire of 1.5 sqmm multistranded copper wire complete all as specified and directedNote : There shall be separate circuit for independent board |
| 113 | All as per Item No. 109 above but One bell/buzzer point controlled by one bell push complete all as specified and directed |
| 114 | All as per Item No. 109 above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and directed |
| 115 | All as per Item No. 109 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point. |
| 116 | All as per Item No. 109 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and directed |
| 117 | M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed.Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. |
| 118 | As per item No 117 above but 2 x 1.50 Sqmm with earth wire of 1 x 1.5 Sqmm complete all as specified and directed |
| 119 | As per item No 117 above but 2 x 4.0 Sqmm with earth wire of 1 x 4.0 Sqmm complete all as specified and directed |
| 120 | As per item No 2117 above but 2 x 6.0 Sqmm with earth wire of 1 x 6.0 Sqmm complete all as specified and directed |
| 121 | Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed |
| 122 | S&F Bell ding dong, AC 230 volts, single phase complete all as specified and directed |
| 123 | Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed |
| 124 | Supply and fix Modular switch one way 6A, 1 module complete all as specified and directed |
| 125 | Supply and fix Modular switch one way 16A, 1 module complete all as specified and directed |
| 126 | Supply and fix Modular bell push 6A, 1 module complete all as specified and directed |
| 127 | Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specified and directed |
| 128 | Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed |
| 129 | Supply & Fix Modular switch 2 way 6A, 1 module |
| 130 | Supply and fix Modular Fan step regulator,120 watt 2 module complete all as specified and directed |
| 131 | Supply & Fix modular motor starter 25A , 2 module for AC complete all as specified and directed. |
| 132 | Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded PVC body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed |
| 133 | Supply & fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed |
| 134 | Supply & fix fittings with recess/surface mount LED down lighters 12 W round/square including driver with rated voltage 240 V , 50 Hz, coolday white/warm white complete all as specified and directed |
| 135 | Supply and fix Energy efficient recess/surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz white /warm white combination with profiled and flat diffuse complete all as specified and directed |
| 136 | Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed |
| 137 | Supply and fix building security light LED 35 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and directed |
| 138 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required. complete all as specified and directed |
| 139 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required . complete all as specified and directed |
| 140 | Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required complete all as specified and directed |
| 141 | Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA breaking capacity, 'C' series complete all as specified and directed |
| 142 | Supply and fix MCB single pole and neutral 240 volt32 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed |
| 143 | Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and directed |
| 144 | Supply and fix MCB triple pole 415 volt 32 amps 10 KA. complete all as specified and directed |
| 145 | Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. |
| 146 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 57,498.00] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender