Tender For Repair & Replacement Of Joinery, Flooring, Brick Work, Plastering,Tiling, Plumbing And Sanitary Fitting And Misc B/R Works In Otm Accn In Zone-Iii Area At Jaipur Mil Stn Under Ge (S) Jaipur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Replacement Of Joinery, Flooring, Brick Work, Plastering,Tiling, Plumbing And Sanitary Fitting And Misc B/R Works In Otm Accn In Zone-Iii Area At Jaipur Mil Stn Under Ge (S) Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82561/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: REPAIR & REPLACEMENT OF JOINERY, FLOORING, BRICK WORK, PLASTERING,TILING, PLUMBING AND SANITARY FITTING AND MISC B/R WORKS IN OTM ACCN IN ZONE-III AREA AT JAIPUR MIL STN UNDER GE (S) JAIPUR CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 4 | M & L for Machine cut kota stone slab flooring 20-25mm thick over and including Screed bed or bedding layer over & incl 15mm thick screed bed in (1:4) for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 5 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including Screed bed or bedding layer or mortar 15mm (1:4) thick for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 6 | M&L for 20mm thick Granite slab for gate pillar & cooking platform (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing laid over 10mm thick cement mortar in (1:4) complete all as specified and directed. |
| 7 | S&F light shade Vetrified Ceramic tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) finished fair and even complete all as specified and directed. |
| 8 | S&F light shade Vetrified Ceramic tiles edge cut 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surface such as skirting dado and wall etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick plaster in CM (1:4) finished fair and even complete all as specified and directed. |
| 9 | M&L for coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) or tile addessive complete all as specified and directed. |
| 10 | S&F Coloured Non-Skid ceramic tiles 7 to 8mm thick (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 11 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 450 mm, 7mm thick over and including 15 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 12 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed. |
| 13 | M & L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 14 | M & L for Brickwork in half brick wall using sub class brick built in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for random ruble uncoarsed stone masonary well bonded ,bedded and solidly hearted built in CM 1:6 complete all as specified and directed. |
| 16 | Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified and directed. |
| 17 | M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even complete all as specified and directed. |
| 19 | M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces including finished even & smooth without using extra cement on ceiling complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces and applying two coats of Oil bound distemper of approved shade/tint over 1mm thick wall care putty on walls complete all as specified and directed. |
| 21 | M&L for preparing of newly plastered surfaces of wall and applying two coat of acrylic emulsion exterior grade paint over a coat of alkaline resistant primer and necessary scafolding and safety measures as required complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered surfaces of ceiling and apply two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed. |
| 23 | Taking down Chowkats or frames not exc. 1.5 sqm wiith shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 24 | Taking down Shutters of any description exc 1 sqm but not exceeding 2.0 Sqm each complete all as specified and directed. |
| 25 | Taking down Chowkats or frames exc. 1.5 sq. m but not exc 4.0 Sqm wiith shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 26 | S&F factory made Mild Steel windows with side hung shelters incl projecting type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 27 | S&F Mild Steel windows with side hung shutter incl projecting type hinge with steel handle and steel peg stay coplete without glazing bars dovetailed or welded complete all as specified and directed. |
| 28 | S&F factory made Mild Steel ventilators with top hung shutter incl hinge with steel handle and steel peg stay complete all as specified and directed. |
| 29 | S&F MS framed work such as grills , gratings guard bars etc with ends of bars shouldred or rivetted or forged into spikes conforming to Fe-310-0 or Fe-410-0 complete all as specified and directed. |
| 30 | M & L for preperation new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint on steel surfaces over a coat of red oxide primer complete all as specified and directed. |
| 31 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire with average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire stapels fixed etc complete all as specified and directed. |
| 32 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 33 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 34 | Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 4 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified and directed. |
| 35 | Description all as per Item No 33.00 above but pin headed figured glass 4mm thick complete all as specified and directed. |
| 36 | S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of primer complete all as specified and directed. |
| 37 | S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of primer complete all as specified and directed. |
| 38 | S & F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass / gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats complete all as specified and directed. |
| 39 | S&F in Repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed complete all as specified and directed. |
| 40 | M & L for 2nd class hardwood, factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 41 | M & L Preperation new wooden Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint on wooden surfaces over a coat of pink primer complete all as specified and directed. |
| 42 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 43 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 44 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 45 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. |
| 46 | S&F 100 mm size MS butt hinges, medium weight complete all as specified and directed. |
| 47 | S&F 300 mm long MS sliding door bolt of stove enameled black (clip type)with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete fitted all as specified and directed . |
| 48 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 49 | S&F mild steel barrel tower bolt stove enamelled black with bright bolt 150 mm long complete all as specified and directed. |
| 50 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 51 | S&F brass handle of 100 mm size cast type, polished bright complete all as specified and directed. |
| 52 | S&F Aluminium handles 125 mm size, cast type, anodised complete all as specified and directed. |
| 53 | S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 54 | S&F MS spring hinges 300 mm, ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden/ angle iron chowkats including welding and MS flat iron complete all as specified and directed. |
| 55 | S & F in repairs 100mm Mortice lock with two levers (vertical Type), brass body and fixed complete all as specified and directed. |
| 56 | S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 57 | S&F Anodised aluminium frame for Powder Coating (minimum thicknessof powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 58 | S&F Anodised aluminium door shutters for Powder Coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note: Glass/board shall be measured and paid Separately. |
| 59 | S&F Anodised aluminium window and ventilator shutters for Powder Coating (minimum thickness of powder coating 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note: Glass/board shall be measured and paid Separately. |
| 60 | Anodised aluminium grill for powder coating of any colour (Thickness or powder coating not less than 50 micron). (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium tandard section around the opening, complete all as specified and directed. |
| 61 | S&F 4 mm thick plain sheet glass ordinary quality in squares not exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified and directed. |
| 62 | S&F 4 mm thick plain sheet glass ordinary quality in squares exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified and directed. |
| 63 | Resecuring or easing & adjusting, without taking down Shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed. |
| 64 | Refixing Shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 65 | Resecuring without taking down Chowkats or frames not exc. 1.5 sqm each complete all as specified and directed. |
| 66 | S&F mild steel pressed handle ovel type stove enamelled black with bright bolt 125 mm long complete all as specified and directed. |
| 67 | S&F 12 mm thick toughened glass as hinged doors, partitions automactic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 68 | S& F Doors closer aluminium (dry cast for body hydraulically regulated desination no 3 , universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg and fixed) complete all as specified and directed. |
| 69 | S & F in Repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 70 | S&F in repair Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 71 | S&F in repair Chromium plated angle stop cock with wall flange but fancy type cast copper alloy 15 mm bore and fixed complete all as specified and directed. |
| 72 | S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore fixed complete all as specified and directed. |
| 73 | S&F in Repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but fancy type of 15 mm bore complete all as specified and directed. |
| 74 | S&F in Repair Brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 75 | S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets /fasteners, cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 76 | S& F in repair 32 mm bore PVC waste pipe 75 cm long of approved make with 32mm dia connector suitable for WHB complete all as specified and directed. |
| 77 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 78 | Demolition of Mangalore pattern roofing tiles with ceiling tiles or slate roofing portions bedded in lime or cement mortar complete all as specified and directed. |
| 79 | M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid in cement mortar 1:6 complete all as specified and directed. |
| 80 | Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan (Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 81 | S&F in repairs Vitreous China squatting pan 'orissa ' pattern `, size 580mmX 440 mm white ,with integral foot rests,(exclusing flushing cistern & flush pipe) including connection to trap and to flush pipe etc including set in and including concrete bed complete all as specified and directed. |
| 82 | S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Litre capacity complete all as specified and directed. |
| 83 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 84 | S&F in Repair Bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) dia of bore 32mm complete all as specified and directed. |
| 85 | Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed. |
| 86 | Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed. |
| 87 | S&F 15 mm High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 88 | S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. |
| 89 | S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. |
| 90 | S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I: 500 Ltrs Capacity complete all as specified and directed. |
| 91 | S&F in Repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity complete all as specified and directed. |
| 92 | S&F in repair Ball brass valves 20 mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 93 | S&F in repair 600mm x 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood including aluminium framing and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 94 | S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 95 | S&F in repair One piece EWC floor mounting with slim soft close seat cover Size 715 x 335 x 715 mm Straight-line design Square bowl Concealed S Trap for better aesthetics Snow White - Whiter than the whitest 220 mm Wall Distance complete all as specified and directed. |
| 96 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 97 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 98 | S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 99 | Providing and fixing suspended false ceiling extra microperforation size of 600 x 600 x 15 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Armstorng make or equivalent including necessary hanging system arrangement which is required to be made from existing RCC roof /stone /slab /ac sheet of existing ceiling complete all as specified and directed. |
| 100 | S&F in Repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 101 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 102 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 103 | S&F in Repair PVC (SWR) bends any radius 75mm Bore complete all as specified and directed. |
| 104 | S&F in Repair PVC(SWR) branch piece, single (single Y) equal or unequal 110 mm Bore complete all as specified and directed. |
| 105 | S&F in Repair PVC(SWR) junction double, (double T), equal or unequal 110 mm with provided with access door complete all as specified and directed. |
| 106 | S&F in Repair PVC (SWR) 'P’ trap 110 mm bore complete all as specified and directed. |
| 107 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement & diameter of outlet 75 mm complete all as specified and directed. |
| 108 | S&F in Repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 109 | M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatment complete all as specified and directed. |
| 110 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ of 1.2 Kg/Sqm including cleaning of surfaces in sunken floor treatment complete all as specified and directed. |
| 111 | Dismantling of 110mm bore PVC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. Note-The length shall be measured along the centre line including fittings and accessories. |
| 112 | S&F in Repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and directed. |
| 113 | S&F in Repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 114 | S&F in Repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 115 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 116 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed. |
| 117 | M&L for rolled miled steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)conforming GDE Fe 410-S complete all as specified and directed. |
| 118 | M&L for MS rolled sections as in trusses, purlins, crane gantries and heavy brackets framing etc, (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W complete all as specified and directed. |
| 119 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with L-type of J-type hook bolts in lieu of screws and washers in roofs etc complete all as specified and directed. |
| 120 | S&F in Repair for 18-20 mm thick High Density high moisture resistant (HDHMR) board for kitchen cupboard / door shutter of make make as approved by GE, one side colour / white laminate and other side decorative as in modular kitchen / cabinets / door shutter fixed with minifix hardware wherever required including edge band 22mm wide, 0.80mm thick of matching colour on exposed surfaces of board fixed with polymaster adhesive of REHAU make or equivalent including trimming edges of edge band to true line of thickness of board by manual trimmer, fixed to wall etc. complete all as specified and directed. |
| 121 | S & F in Repair 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified and directed. |
| 122 | S & F auto close hinges, stainless steel of grade SS-304 , bright finish fixed complete all as specified and directed. |
| 123 | S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified and directed. |
| 124 | Schedule of Credit Total in Figures 0.0 0.0 -69627.4 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Sixty Nine Thousand Six Hundred & Twenty Eight and Paise Sixty Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender