Tender For Provn Of Boundary Wall Near Cwe Office And Repair To False Ceiling, Doors & Windows In Recreation Room At Cwe Office Jaipur At Jaipur Mil Stn
Tender Value
5.03 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
10060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Boundary Wall Near Cwe Office And Repair To False Ceiling, Doors & Windows In Recreation Room At Cwe Office Jaipur At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82563/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: PROVN OF BOUNDARY WALL NEAR CWE OFFICE AND REPAIR TO FALSE CEILING, DOORS & WINDOWS IN RECREATION ROOM AT CWE OFFICE JAIPUR AT JAIPUR MIL STN CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for Cement concrete type D2 1:4:8 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 5 | M&L for cement concrete type B0 1:2:4, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 6 | M&L for Providing precast cement concrete Type B0 1:2:4 (12.5mm graded) in louvers and jallies, 25mm thick , including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed. |
| 7 | M&L for Providing precast cement concrete type B1 1:2:4 (20 mm graded) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:4 complete all as specified and directed. |
| 8 | M&L for rendering 15 mm thick 1:4 on stone surfaces or surface other than fair faces of brickwork finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint of approved shade over a coat of alkali resistant primer complete all as specified and directed. |
| 10 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 11 | Removing excavated material exc.250m but n exc.500m and depositing where directed from starting point complete all as specified and directed. |
| 12 | Dismantling wall & ceiling board (fibre, pulp, insulation etc) or insulation boards/slab/ blankets any thickness including cover fillets complete all as specified and directed. |
| 13 | M&L for T grid fibre reinforced 12 mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per manufacturer instruction complete all as specified and directed. Note:- Pattern shall be approved by GE. |
| 14 | M&L for granite of any type tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed including 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 15 | Providing and fixing factory made uPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +/- 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose. |
| 16 | S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered plywood face panels free from twist or wrap in plane, complete all as specified and directed. |
| 17 | M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters complete all as specified and directed. |
| 18 | S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed. |
| 19 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed. |
| 20 | S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 21 | S&F butt hinges extruded brass with galvanised mild steel hinge pin bright polished and fixed of size 100mm complete all as specified and directed. |
| 22 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 23 | S&F powder coated aluminium frame of approved colour coating for doors, window, ventilators, cabin partition with one or more rebates including joining cleats for fixing etc complete all as specified and directed. |
| 24 | S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 25 | M&L for 4 mm thick Sheet glass ordinary quality and glazing with oil putty/rubber gasket in square n.exc 0.50 sqm in each pane complete all as specified and directed. |
| 26 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered surfaces of walls of any description with 1 mm thick of wall putty and applying two coats of oil bound distemper complete all as specified and directed. |
| 28 | M&L for Preparation of old distempered / decorated surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coats of oil bound distemper over one coat of primer after applying 1 mm thick wall care putty complete all as specified and directed. |
| 29 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 30 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 31 | S&F 25 mm dia stainless steel drapery rod with complete stainless steel holder, brackets and end cap suitable cut to size and fixed in position, including Standard ring complete all as specified and directed. |
| 32 | Schedule of Credit Total in Figures 0.0 0.0 -2700.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Two Thousand Seven Hundred Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender