Tender For Repair To Flooring , Tilling, Roof Treatment, Plumbing Work And Misc B/R Work In Other Than Mh Under Ge(U) E/M Meerut Cantt.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring , Tilling, Roof Treatment, Plumbing Work And Misc B/R Work In Other Than Mh Under Ge(U) E/M Meerut Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats with shutter (Without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats with shutter (Without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutter exc 1. Sqm but not exc 2 sqm each complete all as specified and directed. |
| 4 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thicK PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. |
| 5 | S & F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 6 | S&F 150mm long stainless steel tower bolt complete all as specified and directed. |
| 7 | S&F 150mm long stainless steel handles complete all as specified and directed. |
| 8 | S&F butt hinges medium weight, colled rolled stainless steel 100 mm long complete all as specified and directed. |
| 9 | Taking down steel tubing and connections,15 mm dia bore pipes complete all as specified and directed. |
| 10 | Ditto all as item No 9 but 20 mm dia of pipe complete all as specified and directed. |
| 11 | S&F in replacement of 15mm dia GI Tubing medium grade with all fittings fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 12 | All as above item No 11 here-in- before but dia of pipe 20mm bore complete all as specified and directed. |
| 13 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 14 | S & F in repairs Brass chromium plated wall mixer for mixing 3 in 1 with L Key hot or cold screwed down high pressure with or without lettered `' with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm dia bore pipe complete all as specified and directed |
| 15 | S&F in repairs Brass chromium plated wash hand basin mixture for mixing hot or cold screwed down high pressure with or without lettered `' with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm dia bore pipe complete all as specified and directed. |
| 16 | S/F in repairs plain sheet glass 3.00mm thick glazing with oil putty n.exc 0.50Sqm in each pane complete all as specified and directed. |
| 17 | S/F in repairs frosted glass 3.00mm thick obscured or figured on one side & glazing with oil putty n.exc 0.50Sqm in each pane complete all as specified and directed. |
| 18 | S & Fix in repairs galvanised iron wire cloth ,0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galv. Wire stapples complete all as specified and directed. |
| 19 | S&F in Repair for anodised aluminium partition work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, complete all as specified and directed. |
| 20 | S&F aluminium anodised sections doors comprising glazed shutters with frame using aluminium anodised extruded sectiions of size 63.50mmx38.10mm for frames, 85mmx44.45mm for stiles, 83.50x44.45mm for top and middle rails , 100mm44.45mm for bottom rail of shutters having 1.25mm thickness, glazing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 125 mm size stainless steell butt hinges -03 Nos per leaf, aluminium anodised fancy extruded section 200mm long handle-01 No per leaf, aluminium anodised Tower bolts 200mm long -02 Nos per leaf, aluminium anodised aluminium body hydraulic door closer 01 No per leaf of suitable capapcity, floor door stopper of anodised aluminium body 150mm long 01 No per leaf, brass Mortice lock 6 lever of required size -01 No per door complete all as specified and directed. |
| 21 | S&F In repair bib taps chromium plated, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and directed. |
| 22 | S&F in repair angle valves chromium plated, screwed down high pressure, screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe complete all as specified and directed. |
| 23 | S & F in repair of vitreous China urinal, flat back, half stall type white/ ivory colour with grating and Union for discharge pipe. Including connection to flushing pipe and outgoing waste pipe complete all as specified and directed. |
| 24 | S&F in repairs Vitreous china wash basin white flat back size 580x 450mm including ,pedastal type waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe complete all as specified and directed. |
| 25 | S&F in repairs pillar taps fancy type, with capstain heads, chromium plated, screwed down high pressure , with or without lettered HOT or Cold with long screwed shanks and fly nuts , srewed for iron pipe and fixed 15 mm dia of pipe complete all as specified and directed. |
| 26 | Dismantling PVC water tanks up to 500Ltr capacity and S&F rotational moulded Polyethelene (HDPE) triple layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and directed. |
| 27 | Dismantling PVC water tanks up to 1000Ltr capacity and S&F rotational moulded Polyethelene (HDPE) triple layer water tanks, cylindrical & vertical type 1000 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and directed. |
| 28 | Taking down existing unserviceable water closet and S&F Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitng complete all as specified and directed. |
| 29 | Taking down of existing unserviceable wash down water closet with seat cover and S&F Vitreous China white wash down water closet ( padestal pattern) , including fixing bolts, plastic closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device, including connection to drain pipe, and to flushing pipe and antisyphonic pipe etc. complete all as specified and directed |
| 30 | S and F in repair stainless steel sink 1 mm thick for kitchen, with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling complete all as specified and directed. |
| 31 | S/F in repairs Vitreous china wash basin white flat back size 580 x 450mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe complete all as specified and directed. |
| 32 | S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 33 | S&F vitreous China one piece EWC wash down water closet pan ( padestal pattern Water Closet , white ) , with seat cover and twin flush fittings including connection to drain ( or outgoing pipe) , etc., and fixing of seat cover complete all as specified and directed. |
| 34 | S&F in repair 20mm ball valves, high pressure, with polythene float valve and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 35 | S & F in repair monkey proofing galvanised/MS water tank cover for 500/1000 ltr tanks with fixing all arrangements complete all as specified and directed. |
| 36 | S&FAnodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed. |
| 37 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 38 | Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as specified and directed. |
| 39 | Demolition of concrete ( un reinforced ) in ground floors and paving exc 15 cm thk (below or above ground level) complete all as specified and directed. |
| 40 | M&L for 25 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in sub base complete all as specified and directed. |
| 41 | M&L for machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete all as specified and directed. |
| 42 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 43 | All as per item No 42 but on skirtings incl 10 mm thick backing coat in CM (1:4) complete. |
| 44 | M&L for vitrified coloured glossy finish tiles 8-9mm thick (square/rectangular) polished size 1200mm x 600mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed. |
| 45 | Ditto above item No 44 but on skirting including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 46 | M&L for glazed coloured ceramic tiles 600mmx300mm to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 47 | M & L 50 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in plinth protection finished even and fair complete all as specified and directed. |
| 48 | Demolition of brick work or stone work built in cement mortar including all quoins arches , pillers etc complete all as specified and directed. |
| 49 | M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:4 complete all as specified and directed. |
| 50 | Plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including necessary formwork and finishing all exposed surface of concrete as per clause 4.11.16.2(a) & (d) of SSR Part-I. |
| 51 | M&L for Rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick work in CM 1:6 complete all as specified and directed. |
| 52 | M & L for 16-18mm thick black granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed. |
| 53 | S&F in repair PVC waste pipes for WHB/Urinal and sink complete all as specified and directed. |
| 54 | Complete removing existing roof treatment any type and M&Lfor roof treatment with APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps including rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed |
| 55 | M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in as sub base of interlocking/chequred tiles complete all as specified and directed. |
| 56 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,awns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and as directed. |
| 57 | M&L for providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stop, rounded or chamfered on edges complete all as specified and directad |
| 58 | Dismantling of cast iron,100/110mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe |
| 59 | Dismantling of cast iron,75mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe |
| 60 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring jointed fixed to walls including all fitting and fixter and taking out old pipe complete all as specified and directed. |
| 61 | S&F PVC (SWR) pipes complete all as specified and directed.R) pipes 75mm bore single socketed in any length with rubber ring jointed fixed to walls including all fitting and fixter and taking out old pipe |
| 62 | S&F PVC (SWR) 110 mm bends any radius complete all as specified and directed. |
| 63 | S&F PVC (SWR) 75 mm bends any radius complete all as specified and directed. |
| 64 | S&F in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement, bore of pipe in 75mm complete all as directed |
| 65 | S&F in repair looking mirror 5 mm thik of required size including fixing ss studs/screw complete all as specified and directed by Engr-in-charge. |
| 66 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering including taking out old unsv PGI/ CGI sheets complete all as specified and directed. |
| 67 | M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick AZ 150 of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick AZ 150 of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender