Tender For Provision Of Urc At Af Station Thanjavur
Tender Value
3.83 Crore
Estimated cost
Bid Submission
11 Aug 2026
34 days left
EMD
4.58 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Urc At Af Station Thanjavur
BOQ
| Sl. No. | Item Description |
| 1 | BOQ No.1 |
| 2 | GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XI are prepriced by MES under Ser No. 1 to 11. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only. |
| 3 | Lumpsum price worked out by the contractor for “BUILDINGS OR WORKS” as listed in Schedule ‘A’ Part–I |
| 4 | Lumpsum price worked out by the contractor for “SITE CLEARANCE” as listed in Schedule ‘A’ Part–II |
| 5 | Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part–III |
| 6 | Lumpsum price worked out by the contractor for “INTERNAL ELECTRIC SUPPLY\\" as listed in Schedule ‘A’ Part–IV. |
| 7 | Lumpsum price worked out by the contractor for \\"ROAD/HARDSTANDING\\" as listed in Schedule ‘A’ Part -V . |
| 8 | Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part – VI. |
| 9 | Lumpsum price worked out by the contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part – VII. |
| 10 | Lumpsum price worked out by the contractor for “FENCING AND GATE” as listed in Schedule ‘A’ Part – VIII. |
| 11 | Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part – IX. |
| 12 | Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part – X. |
| 13 | Lumpsum price worked out by the contractor for \\"SOLAR SYSTEM\\" as listed in Schedule ‘A’ Part -XI. |
| 14 | Sch 'A' Part - XII : REFRIGERATION AND AC |
| 15 | Supply , installation, testing and commissioning of 5TR capacity package type Air conditioner , water cooled , 415 volts 3 phase, 50Hz complete with cooling tower, condenser water pump sets, ducting insulation, refrigerant piping , elctrical wiring , controls , plumbing and allied civil works complete in all respect as specified and directed by Engr-In-charge:- The work shall conform to :IS-1391-Room air conditionersIS-655-Metal Air ductsIS-659- safety code for mechanical refrigerationIS-3043- EarthingType of refrigerant : R-410AThe Unit shall consists of , Hermetically sealed scroll compressor, Air cooled condenser, DX cooling coil, Centrifugal blower, Air Filters, Electrical starter, Control Panel and thermostat.Cabinet shall made of heavy gauge CRCA sheet with powder coated finish with double skin insulated panelsBlower shall be suitable for ductd operationCopper tubes with aluminium fins shall be leak tested Refrigerant piping shall be hard drawn copper piping insulated with nitrile rubber, leak tested, Brazed joints |
| 16 | Sch 'A' Part - XIII : FITTINGS AND FIXTURES AND MISCELLANEOUS ITEMS |
| 17 | INTERNAL ELECTRIC SUPPLYSupply and fix LED light fitting 4 feet , 1X18/20 Watt surface mounted mirror optic luminaries with parabolic bright anodized AL reflector and plastic end caps suitable for connecting up with three core flexible copper conductor cable of suitable size from ceiling rose compelete all as specified and as directed . |
| 18 | Supply and fix LED light fitting 2 feet , 1X10/11 Watt surface mounted mirror optic luminaries with parabolic bright anodized AL reflector and plastic end caps suitable for connecting up with three core flexible copper conductor cable of suitable size from ceiling rose compelete all as specified and as directed . |
| 19 | Supply and fix LED light fitting surface mounted 2X2 feet & 1X4 W LED of 36 Watt luminarie made with CRCA sheet metal which is light in weight , CRCA housing and frame with wider light window with opal polyesters diffuser and uniform lighting for modern work places , CCT-6500K, 120 Lm/Watt complete including necessary connections and suitable wire all as specified and as directed. |
| 20 | Supply and fix downlight LED luminarie 12 Watt ,6522K 100Lm/Watt designed to deliver not for just high efficiency but also a superrior quality bof light . These downligher are made with pressure die cast housing and clap at back side provided for suitable mounting , polycarbonate diffuser is provided for spot free and uniform lighting complete all as specified and directed. |
| 21 | Supply and fix 45 Watts LED security lighting with pressure die cast IP-66 protection luminous efficiency of 100 lm/Watt PF>0.95, CRI>80 , colour temperature 5700K suitable for primary roads with all connected accessories including bracket made of GI tubing 32/40mm dia of length 1.2 M light grade with GI clamps, nuts and bolts etc.. for fixing of fitting complete in all respect all as specified and directed |
| 22 | EXTERNAL WATER SUPPLYCutting the existing DI/CI pipe of 200 mm dia and required length in position for inserting new Tees, branches etc. including fitting, excavation, refilling, ramming complete all as directed by Engr-in charge |
| 23 | EXTERNAL ELECTRIC SUPPLY Supply and fix 150 watt LED flood light luminaire with high power LED aaesthetically design with better thermal management complete with IP 65, complete all specified and as directed. |
| 24 | Supply and fix Automatic street light switch of rating 3 KW in three phase using nature sensor for automatic switching \\"ON/OFF\\" of street lighting based on lux level of natural lgiht along with 40 Amps three pole contactor, MCB 63 Amps three pole with support terminals prewired with PVC insulated 16 sqmm multistand copper wire enclosed/housed in pole wall mounted enclosure made of rust proof, shock proof, termite proof & dust proof, FR grade special moulded compound conforming to IP-54 complete all as specified & directed. |
| 25 | Supply, installing, testing and commissioning in replacement factory made LT Panel double door, outdoor type, fabricated not less than 3.0 mm thick MS sheet, openable from rear both with 40X40X6 mm angle iron frame at base 30 cm long legs grouted in pillars of PCC 1:2:4 type B1 using 20mm stone aggregate with clearence of 90 cm from ground level and locking arrangement powder coated finish over a coat of red oxide primer on outside and two coats of red oxide primer on inside surface and comprising of following including Excavation/Earthwork/PCC complete all as directed and specified. MCCB 4 pole 63 Amps, 16 KA -01 No.Bus bar aluminium of size 25 x 3 mm.PVC insulated overall PVC sheathed 2.5 sqmm 2 core copper conductor cable from MCB to high mast luminarires.MCB 63 Amp 2 pole - 01 No.MCB 32 Amp 2 Pole - 02 No.PVC insulated overall PVC sheathed 2.5 sqmm 2 core copper conductor cable from MCB to Motor - 10 RM.Cable gland/rubber bush as applicable to check the entry to foreign inspects etc.Internal wiring with PVC insulated multistranded copper conductor cable, 1100 V grade, IS 694 marked of appropriate size but not less than 0.5 sqmm.Digital voltmeter & Ammeter with necessary CTs.LED lamp R, Y, B indication. |
| 26 | Material and labour for fabrication of bus bar chamber suitable for 415 volts 3 phase 4 wire system with MCCB 200A, 25 KA, 4 pole, outdoor type, double door, with pedestal mounted, weather and vermin proof fabricated out of 3.15 mm thick MS CRCA sheet with anti corrosive coating & finally epoxy polyster powder coating of flint grey shade including 3 nos. phase indicating lamps, insertion of suitable cable glands for all incoming and out going cable including grouting of panel board 60 cm above & 30 cm below ground level duly supported on 50x50x6mm angle iron frame & welding 45 cm long angle iron legs of size 50x50x6mm on all the four corners embedded in PCC 1:2:4 using 20 mm geaded stone aggregate upto 30 cm depth complete all as specified and directed by Engineer-in-Charge comprising of 4 Nos. aluminium bus bar 315 Amp for phases & 160 Amp for neutral mounted on DMC/ porcelain insulator support complete all as specified and directed.Note :The panel is including platform with PCC 1:4:8 type D2 with 40mm graded stone aggregate 20cm thick in foundation and of height 0.90 m above the nearest ground level. |
| 27 | SOLAR SYSTEM Supply, fix, testing, connecting, charging and commissioning of Mono Crystalline Solar Panel, antiglare type, with Max 535 Wp, MNRE approved Indigenous, IEC 61215, IEC 61730-I & II, IEC 61704, NEW PID FREE AND ETL (UL 1703) CERTIFIED and module mounted in anodised aluminium frame with twinwall profile structure complete all as specified and as directed.Note- Mounting structure along with foundation will be measured and paid separatelya) Output power - Pmax (Watt peak)-535 Wp, Tolerance 0 ~ + 3 % (b) Voltage at Pmax - 30.95 V (c) Current at Pmax - 8.08 A (d) Open circuit voltage - 37.00 V (e) Short cicuit current - 8.55 A (f) Maximum system voltage (Volts) - 1000 V DC (g) Type of solar PV cell -Mono- Crystalline (j) Module output - MC electronics plug (Male and female) (k) Certification - IEC 61215 and IEC 61730 (l) Application Class - A (m) Safety Class - A (n) Fire rating Class - C (o) Power warranty - 10 year warranty on 90% of the minimum output and 25 years warranty on 80% of the minimum output (p) All above electrical parameter measured - Standard test condition of irradiance of 1000 W/m², AM 1.5 and cell temperature of 25° C |
| 28 | Supply & fix Solar String Inverters of capacities 30KW including 2 RM power cables 1.1 KV , 5 Corex35 Sqmm CU PVC/ XLPE cable and Array junction box alongwith canopy made up of 3.15mm thick MMS sheet duly painted suitable for 30KW inverter including separate junction box if it is required based on manufacturer's recommendations and comprising of following technical specification is as follows.Input (DC) (a) Maximum Input voltage - 1000V (b) Operating voltage range - 200 - 1000 V (c) MPP voltage range - 520 -800 V (d) Rated voltage - 600 V (e) Max. input current - Each MPPT: 50 A, Total : 100 A (f) MPP tracker - 2 (g) Connection type -10 Pairs MC4 Output (AC) (a) Max. Output power - 30KW (b) Max. output Current - 76 A (c) Rated Voltage - 3 Ph 230/400V (d) Operating voltage range - ± 20 % (e) Power factor (Adjustable) - 0.8 ind - 0.8 Cap (f) Output frequency - 50/60 HZ ± 5 HZ (g) Harmonic distortion , current < 3 % Efficiency Peak Efficiency - 98.60% Euro Efficiency - 98.40 % Width/Height/Depth,mm (W/H/D) - 740/612/278 Weight appx. - 70 Kgs Operating conditions -25 Degree to +60 Degree Celsius |
| 29 | Supply & fix Module Mounting Structure Hot Dip Galvanized mounting structures with 80micron galv. thickness, designed for wind load of 150 KMPH. Type : Fixed tilt alongwith the safety hand rails (Yellow colour painted) on each rooftop (Height 0.5 mtrs) along with one maintenance ladder in all. Tilt Angle : 10 Degree or as suggested by OEM. The following technical specification is as follows:- (a) Type - Fixed tilt structure , Roof mounted (b) Configuration - 4 & 6 Modules per structure or as suggested by the manufacturer (c) Material - Mild steel (d) Protective coating and thickness of coating - Hot dip galvanized with minimum 80 microns thick. (e) Wind rating - 150 KM/HR (Horizontal) (f) Tilt angle -10 ° or as suggested by the manufacturer (g) Foundation - PCC/RCC (h) Fixing type - GI/SS304 fasteners (j) Applicable standards - IS 226 ,2062 (k) Ground Clearance - 500 mm minimum |
| 30 | Supply and Fix Net Meter with PVC enclosure and connection complete all as specified and directed. |
| 31 | Supply installation testing and commissioning of DC distribution board (DCDB) suitable for 30KW rooftop solar PV plant complete with DC isolators, string protection devices, surge protection busbars, cabling and accessories for safe collection and distribution of DC power from solar PV strings to inverter complete with 63 Amp MCB TP with necessary DC cable wiring for proper functioning of the plant. Note:(i) DCDB shall be provided between solar PV array and inverter(ii) The DCDB shall be suitable for outdoor rooftop installation(iii) Shall be dust, moisture and vermin proof(iv) ENclosure shall be IP-65 Protection(v) Earthing studs shall be provided minimum of 2 Nos |
| 32 | Supply and fix AC adapter box (ACDB) for combining 30 KW AC inverter including output of XLPE copper cable 1.1 KV of rating 1 Rx 5 C x 25 Sqmm and LT panel input cable of Aluminium armoured ,1.1 KV XLPE cable of rating 1 R x 3.5 C x 120 Sqmm with suitable copper bus bar of rating for (RYB) 150 A - 03 Nos and copper bus bar rating 75 A - 01 No for Neutral with bi-metallic lugs for 25 Sqmm and for aluminium cable , Input and output glands suitable for cable , Polycarbonate IP 65 Enclosure complete all as specified and directed. Note : (i) The rate deemed to be included the rate of MCB TP 63 AMps (ii) He rate deemed to be inclusive of all the cables and connected accessories(ii) Adapter box to be fixed at the bottom of the inverter and using inverter stand structure column support. |
| 33 | Supply and Fix Surge Protection Device suitable for 415 Volts AC, Type II with visual indication and replaceable cartridges complete all s specified and directed. |
| 34 | Supply and Fix Cable Connectors (MC4 male & female) 1000V (IEC/CEI),600V (UL), With safety clip that requires a tool to unlock (NEC2008 compliant) Certified for applications with modules according to IEC 61730, Safety class II, Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment -with Minimal voltage drop, High current-carrying capacity, Minimal power loss, Minimal contact resistance, High durability contacts withstand up to 1 million mating cycles, Operating temperatures up to 350°C,higher temperatures permitted for short periods and including connecting copper lugs 02 Nos complete all as specified and as directed. |
| 35 | Supply and fix power control cables single core double insulated solar cable with fine copper wire multistranded, single core 6 Sqmm(or suitable size suggested by the manufacturer), FLX- SOL -XL type, TUV certified according to latest regulations, -40°C to +120°C (permanent) UV, ozone and hydrolysis-resistant including all accessories and fixing arrangement complete all as specified and as directed. |
| 36 | Supply and fix aluminium composite panel of 4mm thick exterior grade in wall / column / ceiling with combination of aluminium skin material of 0.25mm thick (two or more metallic coloured coating sheet as directed) aluminium sheet of alloy grade 1100-H14 cover material, coated on external side with PVDF coating containing 70% resins for anti-fungal and anti bacterial properties and the center core shall be with natural polyethelene (HDPE) bonded to the aluminium skin on both side over aluminium frame of section 50 mm x 37 mm x 1.6 mm (16 gauge) fixed on the wall/ Ceiling. Cladding panel to be fixed with rawl plug and SS screw all as approved on walls and roof including necessary accessories, complete all as per manufacturer's instructions and as directed by Engr-in-charge |
| 37 | Supply and fix Toughened glass of any colour (black/blue) 6mm thick by providing 12mm aluminium angle fixed with frame 19x6 stare screws, spacer tape 6x6mm are provided to fixing the glass with aluminium frame, corner and inside and outside joints of the glass provided with waker silicone,weather silocon sealant etc complete all as specified and directed by Engr-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 34 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 41 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender