Tender For Provision Of Trolley Mounted Stand By Transformer 200 Kva Capacity Alongwith Connected Items For Army Area Under Ge Avadi
Tender Value
9.93 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
15 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Trolley Mounted Stand By Transformer 200 Kva Capacity Alongwith Connected Items For Army Area Under Ge Avadi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMAND WORKS ENGINEER,CHENNAI Name of Work: PROVISION OF TROLLEY MOUNTED STAND BY TRANSFORMER 200 KVA CAPACITY ALONGWITH CONNECTED ITEMS FOR ARMY AREA UNDER GE AVADI Contract No: CWE/AVD/ OF 2026-27 Name of the Bidder/ Bidding Firm / Company : SCHEDULE 'A'(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of items Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Supply,install , testing and commissioning of trolley mounted distribution transformer of 200 KVA capacity , 11/0.433 KV, 3 Ph, ONAN, Copper wound, BIS Certified EEL-2 Distribution Transformer with Off Circuit Tap Switch on HV Side with tapping range of +5% to -10% insteps of 2.5 % along with MCCB on LT Side, Total Losses @ 50% Load : 980 W Total Losses @ 100% Load : 2930 W mounted on Trolley of suitable size to accomodate Transformer of 200 KVA out door type complete all as specified and directed. Note: Trolley of suitable size consisting and including of all accessories shall be measured and paid seperately under BOQ Ser item No 02 |
| 3 | Supply and fix Trolley of suitable size to accommodate and fixing Transformer of 200 KVA capacity as per Manufacturer's instruction and recommendations , made out of mild steel channels of size 100mm / 75mm frame ,covered with 4 mm thick chequered plate or MS Sheet for base floor of the trolley, supported with angles iron & flat iron of size 50mm x 6mm thick frame work complete with nut and bolts etc for mounting Transformer 200 KVA Out door type with and including suitable rating MCCB and trolley shall be consisting of the following accessories and attachments :- (a) Centre axle two (02) Nos with moving attachments with towing hook on front axle turnable upto 30°, towing attachment should be spring loaded towing hook for universal attachment with any vehicle size 36mm round,wheel drums for mounting wheels and Eight Nos inner tubes/outer tyres complete for front & rear (Make -CEAT, JK, MRF).(b) Four (04) sets of spring tension suitable capacity to bear the load of 200 KVA Transformer.(c) Two (02) Nos of Spare inner typres/tubes (Stepney)complete. (d) Provision of wheel brake system with hand lever. (e) Finishing the complete trolley with grinding and applying one coat of Zinc-chromate primer and two coats of super synthetic enamel paint of any approved shade (f) Traingular draw bar on front made with male female angle and pipe bushes with eye hook towing arrangement. (g) Hydraulic jack with iron wheel not less than 3 TON capacity. (h) LT panel board KIOSK outdoor type 3.15mm thick for 400 Amps thermal magnetic type MCCB, 415V,50kA,aluminium bus bar for suitable rating, front and rear door opening system, digjtal multifuntional meter panel complete mounted on trolly stand complete all as specified and directed. Note :- Contractor shall provide the drawings, layout sketch of complete trolly with acessories for mounting of transformer and necessary approval from GE shall be obtained before fabricating and execution at site. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender