Tender For Provn Of Guard Room At Gate No 2 At Inf Bn At Gulmarg Under Ge 969 Ews.
Tender Value
41.52 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
15 days left
EMD
83040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Guard Room At Gate No 2 At Inf Bn At Gulmarg Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard and dense soil, complete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc or for shaft well, cesspits etc n.exc on plan and n.exc 1.5m depth and getting out in hard/dense soil, complete all as specified and as directed. |
| 3 | All as per above item No. 2 above but, depth to 3.00m and getting out in hard/dense soil, complete all as specified and as directed. |
| 4 | M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete , complete all as specified and as directed.. |
| 5 | Use & waste of formwork to rough finished surfaces of concrete, form work to sides of plinth beam, footings, bases of columns etc , complete all as specified and as directed. |
| 6 | M&L for RCC M-30 (design mix) using 20mm graded aggregate as in fdn, footing, plinth beam, bases for columns etc , complete all as specified and as directed. |
| 7 | Use & waste of formwork to square or rectangle shape and fair finished surfaces of concrete, to sides of pillars, post , struts etc , complete all as specified and as directed. |
| 8 | M&L for RCC M-30 (design mix) using 20mm graded aggregate as in columns etc , complete all as specified and as directed. |
| 9 | Formwork to soffits of fair finished suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (Horizontal or sloping) etc , complete all as specified and as directed. |
| 10 | M&L for RCC M-30 (design mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like , complete all as specified and as directed. |
| 11 | Use & waste of Formwork finished fair to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc etc , complete all as specified and as directed. |
| 12 | M &L RCC (design Mix) M-30 (20mm grade aggregate in beam bressummers, limtels over 1.5m span etc, complete all as specified and as directed. |
| 13 | M&L TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for cols, hooking ends and binding with and including mild steel wire (aneeled) not less than 0.9mm dia, complete all as specified and as directed. |
| 14 | M&L TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed. |
| 15 | Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and as directed. |
| 16 | Removing of excavated soil not exc 50m and depositing where directed at a level not exc 1.5 M above the starting point , complete all as specified and as directed. |
| 17 | M&L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 , complete all as specified and as directed. |
| 18 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 , complete all as specified and as directed. |
| 19 | M & L Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 20 | M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.(Note - W P C shall be measured and paid separately). |
| 21 | M & L Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement on ceiling surfaces, complete all as specified and as directed. |
| 22 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed. |
| 23 | M&L for preparing newly plastered surfaces of walls , applying two coats of distemper oil emultion, white ot tinted, complete all as specified and as directed. |
| 24 | M&L for preparing newly plastered surfaces of ceilings , applying three coats of white wash, complete all as specified and as directed. |
| 25 | M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exce 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 26 | M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and as directed. |
| 27 | M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base/ flooring, complete all as specified and as directed. |
| 28 | M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and as directed. |
| 29 | M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid including 15mm thick rendering in cement mortar 1:4 and jointed , complete all as specified and as directed. |
| 30 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed. |
| 31 | M & L Glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4, complete all as specified and as directed. |
| 32 | S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and as directed. |
| 33 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing, complete all as specified and as directed. |
| 34 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc, complete all as specified and as directed. |
| 35 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 36 | S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 37 | S&F 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle boarde with commercial veneering on both faes. The size of rail and stile (second class hardwood) as per IS-1003 (part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 38 | S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 39 | S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b), complete all as specified and as directed. |
| 40 | Preparation of newly or previously untreated wooden surfaces of any description over 10 cm width or girth and priming with pink primer ovder two coats of synthetic enamel paint on wooden surfaces, complete all as specified and as directed. |
| 41 | S&F 300mm long long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alouminiu alloy and fixed, complete all as specified and as directed. |
| 42 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average wide of aperature 1.40mm and fixed with stainless steel wire staples etc , complete all as specified and as directed. |
| 43 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed. |
| 44 | S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010, complete all as specified and as directed. |
| 45 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item, complete all as specified and as directed. |
| 46 | S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane , complete all as specified and as directed. |
| 47 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed. |
| 48 | S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed. |
| 49 | S & F Butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed. |
| 50 | S & F Butt hinges, 50 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed. |
| 51 | S & F 150mm long aluminium anodised, barrel tower bolt ISI marked, complete all as specified and as directed. |
| 52 | S & F 100mm long aluminium anodised, barrel tower bolt ISI marked, complete all as specified and as directed. |
| 53 | S & F 150mm long aluminium anodised cast type alumiinium handle ISI marked, complete all as specified and as directed. |
| 54 | S & F 100mm long aluminium anodised cast type alumiinium handle SI marked, complete all as specified and as directed. |
| 55 | S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe, complete all as specified and as directed. |
| 56 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, complete all as specified and as directed. |
| 57 | S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore, complete all as specified and as directed. |
| 58 | S&F Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs, complete all as specified and as directed. |
| 59 | S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle , complete all as specified and as directed. |
| 60 | S & F 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed, complete all as specified and as directed. |
| 61 | S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 62 | S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 63 | S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and as directed. |
| 64 | S&F 100mm bore PVC (SWR) 'T 'any radius, complete all as specified and as directed. |
| 65 | S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement, complete all as specified and as directed. |
| 66 | S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed. |
| 67 | S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 Sqcm and n.exc 25 Sqcm , complete all as specified and as directed. |
| 68 | S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm , complete all as specified and as directed. |
| 69 | M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc, complete all as specified and as directed. |
| 70 | S&F Vitreous Cliina wash basin, wliile, flat back, size 580x450irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets etc, complete all as specified and as directed. |
| 71 | S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. |
| 72 | M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 73 | S & F for 4 mm thick figured glass pin head ftype and glazing with oil putty in squares n.exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 74 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 75 | S&F 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes of 16mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc , complete all as specified and as directed. |
| 76 | All as per above item No. 75 but 20mm outer dia, complete all as specified and as directed. |
| 77 | Lgging to 20mm bore pipe exposed PPR tubing all around (incl provisions of lagging on pipe fitting ie., unions, elbows, nipples, tees etc) with 40mm thick bonded mineral wood performed 'SNAP ON' pipe section of density 144 Kg/Cum confirming to IS-9842 with chicken mesh wire netting 25 gauge, 20mm mesh with 0.01 mm aluminium foil , complete all as specified and as directed. |
| 78 | M&L for Bib taps, cast copper alloy chrominium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed , complete all as specified and as directed. |
| 79 | S&F PVC connections 15mm size with PTMT nuts of length 450mm , complete all as specified and as directed. |
| 80 | S&F Chromium plated shower roses 125mm dia with or without swivel joints, any size, including fixing to steel pipe or union , complete all as specified and as directed. |
| 81 | S&F Stop valves, cast copper alloy but fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed. |
| 82 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm bore of pipe , complete all as specified and as directed. |
| 83 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia bore pipe, complete all as specified and as directed. |
| 84 | Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil, complete all as specified and as directed. |
| 85 | M&L Walling of Random rubble masonary, uncoursed, well bonded,bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and as directed. |
| 86 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface nexc 40mm to face stones and dressing of face beds and joints,as specified,of random rubble walling,uncoursed or brought upto coursese for lime or sand stone, complete all as specified and as directed. |
| 87 | M&L Flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses, complete all as specified and as directed. |
| 88 | Hand packing (any thickness) at back of walls ove arches (Broken stone or boulders) etc and raising (or lowering) to the required level , complete all as specified and as directed. |
| 89 | M&L Plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including necessary formwork and finishing all exposed surface of concrete as per clause 4.11.16.2(a) & (d) of SSR Part-I, complete all as specified and as directed. |
| 90 | M&L pre cast cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:6 in bond stone for stone masonary and the like including necessary formwork, complete all as specified and as directed. |
| 91 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering , complete all as specified and as directed. |
| 92 | S & F Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick comple in CM 1:4 , complete all as specified and as directed. |
| 93 | M & L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed. |
| 94 | S&F 10 User LLDPE septic tank conventional designed to carry sewae and sludge water, excavation in any type of soil,PCC 1:4:8 below foundation, vent shaft connection etc, complete all as specified and as directed. |
| 95 | Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 3m depth, complete all as specified and as directed. |
| 96 | M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete, complete all as specified and as directed. |
| 97 | M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6, complete all as specified and as directed. |
| 98 | M & L 1:2:4 types B-1 (using 20 mm graded stone agg) as in coping etc, complete all as specified and as directed. |
| 99 | M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 100 | M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, complete all as specified and as directed. |
| 101 | M&L Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc, complete all as specified and as directed. |
| 102 | Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc, complete all as specified and as directed. |
| 103 | M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed. |
| 104 | M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor. |
| 105 | (a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way |
| 106 | (b) One 3 pin 5 Amp switch socket outlet on independent board |
| 107 | (c) One 3 pin 5 Amp switch socket outlet on same board |
| 108 | M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor. |
| 109 | S&F switch flush type , single pole, one way 6 amp 240 volts, complete all as specified and as directed.Note : Taking down of swithches included in taking down point wiring |
| 110 | S&F Flush type Socket outlet 6 Amps, complete all as specified and as directed. Note : Taking down of socket outlet included in taking down point wiring |
| 111 | S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universal, complete all as specified and as directed. |
| 112 | Switch socket combination 5 pin 15A flush Type, complete all as specified and as directed. |
| 113 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed. |
| 114 | S&F in Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 115 | S&F Distribution Board SPN 8 Way,Single door, complete all as specified and as directed. |
| 116 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity SPN 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed. |
| 117 | Supply and fixing 240V, 10 KA 'B' curve (MCBs) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed. |
| 118 | S&F LED Lamp 15 W, complete all as specified and as directed. |
| 119 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 120 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 121 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 122 | Supply and fixing PVC body fresh air fan with PVC blades, ISI marked, 300 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan, complete all as specified and as directed. |
| 123 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc |
| 124 | Supply, laying and testing cable XLPE insulated screned PVC bedded galvanized steel strip or wire armoured elect power cable 1100 volt grade with standard aluminium conductor of size 16 Sqmm 2 Core |
| 125 | Supply and spread river sand to required width at bottom and top for cable cushioning all as specified in clause 19.75 of SSR part – I (Note :- thickness of sand will be measured after punning) |
| 126 | Supply and lay common burnt bricks of sub class B old size laid at right angle on the cable complete in trenches for cable protection complete all as directed by Engr-in-charge. |
| 127 | S & F GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors for the following sizes complete all as specified and directed by Engr-in-Charge:- . Make : Jindal /Prakash /TATA, Surya . |
| 128 | (a) 20 mm bore size |
| 129 | S&F Gun metal gate valve 20 mm bore with iron hand wheel head , screwed both ends for iron pipes and fixed complete Make : Kirloskar , Zoloto , Venus, Prayag. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender