Tender For Construction Of Raghab Moran Cultural And Infrastructure Project (Phase Ii) Borguri Under Phase-Iii: One Time Special Grant For Development Of Moran Community.
Tender Value
95.52 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
20 days left
EMD
1.92 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Raghab Moran Cultural And Infrastructure Project (Phase Ii) Borguri Under Phase-Iii: One Time Special Grant For Development Of Moran Community.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 3 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand) |
| 5 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 7 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile BFixing with adjustable lugs with split end tail to each jamb |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 11 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) . |
| 14 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flates, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 15 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 16 | A. Conference HallConference Hall Acoustic Panel wall |
| 17 | Conference Hall Panel wall |
| 18 | Conference Table 24'x5' |
| 19 | Conference Hall Chairs (Executive) |
| 20 | Conference Hall Chairs |
| 21 | Wall Cabinet 33'x10' |
| 22 | Conference Hall Door 6'x7' |
| 23 | Blinds/curtains 6'x7'x3 |
| 24 | B. VVIP RoomsKingsize Bed 6.6'x7' |
| 25 | Single size Bed 3'x7'x2 |
| 26 | Wardrobe 3.5'x9'x2 |
| 27 | Bedside Table 2'x1.5'x4 |
| 28 | Mirror 3'x8'x2 |
| 29 | TV cum Study Table 5'x2'x2 |
| 30 | Wall Panelling 12.8'x 4'x2 |
| 31 | Luggage rack 3'x2'x2 |
| 32 | Door Panelling 3.5'x7x2 |
| 33 | Study chairs |
| 34 | Curtains 9'x8'x2 |
| 35 | Coffee table (Round) |
| 36 | C. AMSU Office RoomExecutive Table 3.5'x8' |
| 37 | Executive Chairs |
| 38 | Arm Chairs |
| 39 | Wall Cabinet 12'x9' |
| 40 | Wall Panelling |
| 41 | Sofa cum Centre Table type -I |
| 42 | Door Panelling 3.5'x7' |
| 43 | Blinds/curtains 6'x7'x2 |
| 44 | D. Waiting roomWall Panelling |
| 45 | TV Cabinet 10'x10' |
| 46 | Sofa cum Centre Table, type -II |
| 47 | Door Panelling 3.5'x7' |
| 48 | Blinds/curtains 6'x7'x2 |
| 49 | E. Five nos. Office RoomsWall Cabinet 13'x10' |
| 50 | Executive table 3.5'x6.5' |
| 51 | Executive Chairs |
| 52 | Arm Chairs |
| 53 | File Cabinet 3'x7' |
| 54 | Blinds/curtains 6'x7' |
| 55 | Door Panelling 3.5'x7' |
| 56 | F. Trust OfficeWall cabinet 13'x10' |
| 57 | Executive table 2.5'x5' |
| 58 | Executive chairs |
| 59 | Arm Chairs |
| 60 | File Cabinet 3'x7' |
| 61 | Door Panelling 3.5'x7' |
| 62 | Blinds/curtains 6'x7' |
| 63 | G. Work StationWall Cabinet |
| 64 | Arm Chairs |
| 65 | Door Panelling 3.5'x7' |
| 66 | Blinds/curtains 6'x7' |
| 67 | H. KitchenKitchen cabinet (lower) 13'x3' |
| 68 | Kitchen cabinet (upper) 13'x2' |
| 69 | Partition wall 13'x10' |
| 70 | Main door (Toughen glass) 11'x10' |
| 71 | I. Electronics itemsTV Set (for conference) 95\\" |
| 72 | TV Set (for conference) 55\\" |
| 73 | Set of Microphone with Sound system Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender