Tender For Repairs To Joinery, Flooring, Internal Water Supply Incl Sanitary Fittings And Ancillary Repairs To Brick Work/Plastering Works At Ptms Def Civ Md Accn And Removal Of Small Plants / Bushes / Small Trees Incl External Plastering And Post Co
Tender Value
35 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
12 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Flooring, Internal Water Supply Incl Sanitary Fittings And Ancillary Repairs To Brick Work/Plastering Works At Ptms Def Civ Md Accn And Removal Of Small Plants / Bushes / Small Trees Incl External Plastering And Post Construction Anti Termite Treatment (Att) At Army Area Under Ge Avadi
BOQ
| Sl. No. | Item Description |
| 1 | PART I- REPAIRS TO JOINERY, FLOORING, INTERNAL WATER SUPPLY INCL SANITARY FITTINGS AND ANCILLARY REPAIRS TO BRICK WORK/PLASTERING WORKS AT PTMS DEF CIV MD ACCN |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete, all as specified and directed. |
| 3 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:4 complete, all as specified and directed. |
| 4 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:4 complete, all as specified and directed. |
| 5 | M&L Glazed ceramic coloured tiles 350 x 250 x 7 mm/ 450 x 350 x 7 mm/ 450 x 300 x 7 mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10 mm thick back coat in CM 1:4, complete, all as specified and directed. |
| 6 | Taking up or down steel water tubings and connections of 15 mm bore pipe including cleaning or re-fixing or removal to store, complete, all as specified and directed. |
| 7 | Taking up or down steel water tubings and connections of 20 mm bore pipe including cleaning or re-fixing or removal to store, complete, all as specified and directed. |
| 8 | M&L for unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete, all as specified and directed. |
| 9 | M&L for unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete, all as specified and directed. |
| 10 | S&F in repairs 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, all as specified and directed. |
| 11 | S&F in repairs 15 mm bore bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90 gm), all as specified and directed. |
| 12 | S&F in repairs 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete, all as specified and directed. |
| 13 | S&F in repairs 15 mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15 mm-90 gms), all as specified and directed. |
| 14 | S&F in repair of two way bib cock/2 in 1 tap PTMT 20 mm bore with wall flange complete all as specified and directed. |
| 15 | S&F in repairs 15 mm pillar taps of PTMT, any colour, high pressure, screwed for iron pipe and fixed (minimum weight 110 gms), all as specified and directed. |
| 16 | S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms) complete, all as specified and directed. |
| 17 | S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete, all as specified and directed. |
| 18 | S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm, complete, all as specified and directed. |
| 19 | S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe. (Minimum weight 40 gms), all as specified and directed. |
| 20 | S&F in repairs Tubular towel rail, brass chromium plated 20 mm dia D type, 60 cm long between flanges, complete, all as specified and directed. |
| 21 | S&F in repairs only brass chromium plated Health Faucet with 1metre Flexible tube & Hook (Make Prayag or equivalent) complete, all as specified and directed. |
| 22 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on PVC moulding and fixed to wooden plugs with chromium plated brass screws and cup washers, complete, all as specified and directed. |
| 23 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete, all as specified and directed. |
| 24 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe), including connection to drain or outgoing pipe, flush pipe and anti-syphonage pipe, etc., complete, all as specified and directed. |
| 25 | S&F in repairs vitreous china squatting pan of 'Orissa' pattern, size 580 x 440 mm, white, with integral foot rests, including provision of lime concrete bedding, complete, all as specified and directed. |
| 26 | S&F in repairs 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle/push, including brackets and PVC flushing pipe 32 mm bore, complete, all as specified and directed. |
| 27 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints, all as specified and directed. |
| 28 | S&F in repairs vitreous china wash basin (flat back or angle back type), of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32 mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete, all as specified and directed. |
| 29 | S&F in repairs 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm- 45 gms), all as specified and directed. |
| 30 | S&F in repairs PVC waste pipe 32 mm bore, complete, all as specified and directed. |
| 31 | S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed. |
| 32 | S&F in repairs Grating dome 100 mm dia of PTMT (Minimum weight 25 gms), all as specified and directed. |
| 33 | Taking down PVC (SWR) pipes 110/75 mm internal dia, laid in trenches or fixed to walls, including all fittings, complete, all as specified and directed. |
| 34 | S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete, all as specified and directed. |
| 35 | S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete, all as specified and directed. |
| 36 | S&F 110 mm bore PVC (SWR) bends any radius, complete, all as specified and directed. |
| 37 | S&F 75 mm bore PVC (SWR) bends any radius, complete, all as specified and directed. |
| 38 | Removing plants, weeds, etc., on chajjas, roofs and walls at any position and at any situation of height up to and including 3 storeys/10 m, including RCC roof parapets, and spraying weed-controlling chemical using glyphosate or equivalent in dosage as per manufacturer's instructions and plastering the surface with CM 1:3, complete, all as specified and directed. |
| 39 | Taking down chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm each with shutter (without taking off shutter from the frame), all as specified and directed. |
| 40 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each, complete as directed by Engineer-in-Charge, all as specified and directed. |
| 41 | M&L forming jambs etc to openings (to foregoing items) including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work in Cement mortar 1:6 or cement lime mortar 1:1:8 complete, all as specified and directed. |
| 42 | S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete, all as specified and directed. |
| 43 | S&F small articles of steel such as hold fast, etc of Grade Fe 410-0 or Fe-290 Grade E-165 complete, all as specified and directed. |
| 44 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fasts, etc., complete, all as specified and directed. |
| 45 | M&L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm, all as specified and directed. |
| 46 | M&L for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm, all as specified and directed. |
| 47 | S&F of 35 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete, all as specified and directed. |
| 48 | S&F of 35 mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; size of members of shutters as specified in SSR part I, section 8, clause 8.24(a); supplied and fitted to chowkats complete, all as specified and directed. |
| 49 | S&F of 30 mm thick flush door shutter, solid core construction with particle board core and plywood face panels commercial type on both side complete, all as specified and directed. |
| 50 | M&L preparation of new wood surfaces of any description over 10 cm width or girth and priming with pink primer and painting with synthetic enamel painting two coats, all as specified and directed. |
| 51 | Taking down shutters of any description exc 1 sqm & nexc 2 sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening incl painting touch up to match with the existing colour complete, all as specified and directed. |
| 52 | S&F 300 mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed, all as specified and directed. |
| 53 | S&F for 200 mm length aluminum, anodised, barrel tower bolts of extruded section and fixed, all as specified and directed. |
| 54 | S&F floor door stopper 150 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, all as specified and directed. |
| 55 | S&F in repairs 300 mm ordinary rat tail rod pattern springs including roller and roller plate, complete, all as specified and directed. |
| 56 | S&F 150 mm size aluminium handles, cast type, anodised, complete, all as specified and directed. |
| 57 | S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete, all as specified and directed. |
| 58 | Taking down PVC chowkats or frame exc. 1.00 sqm but nexc 2.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and directed. |
| 59 | S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with 19 mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150 mm long brackets of 15 mm x 15 mm MS square tube inside the 19 mm MS square tube and suitably screwed complete, all as specified and directed. |
| 60 | S&F factory-made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as all as specified and directed. |
| 61 | S&F of aluminium anodised 150 mm barrel tower bolts of extruded section complete as directed by Engineer-in-Charge, all as specified and directed. |
| 62 | S&F of 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete, all as specified and directed. |
| 63 | S&F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete , all as specified and directed. |
| 64 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete, all as specified and directed. |
| 65 | Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 66 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete, all as specified and directed. |
| 67 | S&F anodised aluminium/powder coated window and ventilator shutters of any colour (thickness of powder coating not less than 50 micron), side-hung type without sash bars, aluminium sections weighing 0.55 kg/m, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21, 100 mm long (2 Nos.) and suitable handle (1 No.), complete, all as specified and directed. |
| 68 | Hacking out old broken glass (any size, quality or description) from wooden frames and glazing with putty or beads, complete, all as specified and directed. |
| 69 | Hacking out old broken glass (any size, quality or description) from metal frames and glazing with putty or beads, complete, all as specified and directed. |
| 70 | S&F 4 mm thick figured glass pin-headed type and glazing with oil putty in squares not exc 1.0 sqm in each pane, all as specified and directed. |
| 71 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete, all as specified and directed. |
| 72 | S&F in repairs 100 mm size butt hinge, medium weight, cold-rolled mild steel, fixed complete, all as specified and directed. |
| 73 | S&F in repairs 300 mm long aluminium sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section, and fixing bolts and sliding bolts of extruded section or cast aluminium, fixed complete, all as specified and directed. |
| 74 | S&F in repairs 200 mm length aluminium anodised barrel tower bolts of extruded section, fixed complete, all as specified and directed. |
| 75 | S&F in repairs 150 mm length aluminium anodised barrel tower bolts of extruded section, fixed complete, all as specified and directed. |
| 76 | S&F in repairs 150 mm size aluminium handles, cast type, anodised, complete, all as specified and directed. |
| 77 | S&F in repairs floor door stopper, 150 mm size, of aluminium alloy body and tongue, anodised, with hard drawn rod fixed in floor, complete, all as specified and directed. |
| 78 | S&F in repair for Harrison Curtain rails, mild steel, chromium plated brackets, fixing brackets with rails, stops, rollers etc, all as specified and directed. |
| 79 | Demolition of precast concrete block walling and similar items i.e. ashlar facing, dressed stone work, precast concrete articles, etc., of any description and in any position, built in cement mortar, including all quoins, arches and pillars, etc., complete, all as specified and directed. |
| 80 | M&L for precast cement concrete block masonry with solid blocks exceeding 10 cm in width, set and jointed in CM 1:6, having ratio of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, complete, all as specified and directed. |
| 81 | Taking down cement plaster of any description from brick wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 82 | M&L for 15 mm thick plaster in CM 1:6 on brick work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete , all as specified and directed. |
| 83 | M&L for 5 mm thick plaster in CM 1:3 on brick work / RCC concrete surfaces of ceilings complete , all as specified and directed. |
| 84 | M&L for preparation of newly plastered ceiling surfaces and applied three coats of white wash complete, all as specified and directed. |
| 85 | M&L for preparation of newly plastered wall surfaces and providing and applying 3 mm thick wall care putty on wall to prepare the surface even and smooth, including priming plastered and other surfaces with alkali resistant priming paint and material and labour for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. two or more coats on new work complete, all as specified and directed. |
| 86 | PART II- REMOVAL OF SMALL PLANTS / BUSHES / SMALL TREES INCL EXTERNAL PLASTERING AND POST CONSTRUCTION ANTI TERMITE TREATMENT (ATT) AT ARMY AREA Please Enable Macros to View BoQ information |
| 87 | PART II- REMOVAL OF SMALL PLANTS / BUSHES / SMALL TREES INCL EXTERNAL PLASTERING AND POST CONSTRUCTION ANTI TERMITE TREATMENT (ATT) AT ARMY AREA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender