Tender For special Repair To Certain Bldgs At 19 Arty Bde And Stn Hq Baramulla And Provn Of 269 Mtr Area Drainage System At Baramulla Under Ge 969 Ews
Tender Value
40.26 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
19 days left
EMD
80520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Certain Bldgs At 19 Arty Bde And Stn Hq Baramulla And Provn Of 269 Mtr Area Drainage System At Baramulla Under Ge 969 Ews
BOQ
| Sl. No. | Item Description |
| 1 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, complete all as specified and as directed. |
| 2 | M&L for preparation of new surfaces of walls and applying two coats of cement base paint , complete all as specified and as directed. |
| 3 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. |
| 4 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 6 | Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets, complete all as specified and as directed. |
| 7 | M & L of 4 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work, complete all as specified and as directed. |
| 8 | M & L of 4 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work, complete all as specified and as directed. |
| 9 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section, complete all as specified and as directed. |
| 10 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 sqcm & n.exc 25 Sqcm in section, complete all as specified and as directed. |
| 11 | S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling, complete all as specified and as directed. |
| 12 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceed 1.5 Sqm, complete all as specified and as directed. |
| 13 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exceed 1.5 Sqm and not exceed 4.00 sqm complete all as specified and as directed. |
| 14 | S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 15 | M&L Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(a), complete all as specified and as directed. |
| 16 | M&L for 2nd class 35mm thick Plain frame panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 17 | M&L Preparation of new wooden surface of any description and two coat of synthetic enamel paint over a coat of pink primer, not otherwise described,over 10cm width or girth, complete all as specified and as directed. |
| 18 | M&L Preparation of old wooden surface of any description and two coat of synthetic enamel paint, not otherwise described,over 10cm width or girth incl complete removal, complete all as specified and as directed. |
| 19 | M&L Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 20 | M&L Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed. |
| 21 | M&L Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 22 | M&L M S Butt hinges 100 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 23 | M&L M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 24 | M&L Aluminium handles 100 mm , cast type,anodised complete all as specified and as directed. |
| 25 | M&L Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 26 | S&F Sheet glass thickness 4.00 mm,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old brioken glass, complete all as specified and as directed. |
| 27 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 28 | S&F Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick, complete all as specified and as directed. |
| 29 | M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 30 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed. |
| 31 | M&L non skid coloured printed ceramic tile 7 to 8 mm thick (Square / rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 32 | Demolition of cement concrete (unreinforced) in any position and any thickness (below or above ground level), complete all as specified and as directed. |
| 33 | M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 34 | M&L for cement concrete type C2, 1:3:6 (40mm graded aggregate) as in subbase under floor , complete all as specified and as directed. |
| 35 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory ompaction by using plate vibrator, filling he joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed. |
| 36 | M&L for Preparation of un plastered surfaces of wall and applying two coat of white wash,complete all as specified and as directed. |
| 37 | M&L for Preparation of new plastered surfaces of walls and applying two coat of Distemper,complete all as specified and as directed. |
| 38 | Demolition of cement concrete (reinforced) in any position and any thickness (below or above ground level),complete all as specified and as directed. |
| 39 | Dismantling structural steel work incl doors, gates but excl framed truss etc,complete all as specified and as directed. |
| 40 | Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc or for shaft well, cesspits etc n.exc on plan and n.exc 1.5m depth and getting out in hard/dense soil. |
| 41 | All as per Item above but exc 1.5m depth to 3.00m and getting out in hard/dense soil complete all as specified and directed. |
| 42 | Use & waste of formwork to rough finished surfaces of concrete, form work to sides of plinth beam, footings, bases of columns etc,complete all as specified and as directed. |
| 43 | M&L for RCC M-25 (design mix) using 20mm graded aggregate as in fdn, footing, plinth beam, bases for columns etc,complete all as specified and as directed. |
| 44 | Use & waste of formwork to square or rectangle shape and fair finished surfaces of concrete, to sides of pillars, post , struts etc,complete all as specified and as directed. |
| 45 | M&L for RCC M-25 (design mix) using 20mm graded aggregate as in columns etc,complete all as specified and as directed. |
| 46 | M&L TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for cols, hooking ends and binding with and including mild steel wire (aneeled) not less than 0.9mm dia,complete all as specified and as directed. |
| 47 | M&L TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.all as specified and directed. |
| 48 | Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm,complete all as specified and as directed. |
| 49 | Removing of excavated soil not exc 50m and depositing where directed at a level not exc 1.5 M above the starting point,complete all as specified and as directed. |
| 50 | M & L Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement,complete all as specified and as directed. |
| 51 | S&F mild steel posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets for securing wire mesh etc including MS bars for tightning chain link necessary drilling bolting reveting etc. & similar work, fence with all nut & bolts complete conforming to Fe- 410 - or Fe-310-0,complete all as specified and as directed. |
| 52 | S& F Welded steel wire mesh febric fixed complete to steel members. Weight per sqm exc 4.00 Kg,complete all as specified and as directed. |
| 53 | S&F in repairs galvanized two strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts incl. securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pin etc as directed (Each line of wire to be measured),complete all as specified and as directed. |
| 54 | S&F portions framed & hung as gates, including pintle hinges, stops, hand made sliding bolts, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framed work of water tanks & similar work conforming to Fe 290-0 Gde E-165,complete all as specified and as directed. |
| 55 | Applying two coats of synthetic enamel paint on steel & iron surface of any description, not otherwise described, over 10cm width or girth including preparation of new surface and applying one coat of red oxide zinc chrome,complete all as specified and as directed. |
| 56 | M&L for PCC 1:3:6, Type C-2 (40mm graded aggregate) as in fdns, filling and mass concrete etc,complete all as specified and as directed. |
| 57 | M & L for walling of radom rubble uncoursed well bonded solidily hearted built in CM 1:4 etc all as specified and directed by Engr-in - charge. |
| 58 | M&L for providing cement concrete 1:2:4, Type B-1 (20mm graded aggregate) as in coping etc,complete all as specified and as directed. |
| 59 | M&L for rendering 15mm thick in cement mortar 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing including finishing to surfaces even and smooth without using extra cement etc,complete all as specified and as directed. |
| 60 | M&L for extra stone walling for hammer dressing in faces stones of random rubble walling uncoursed fro granite or trap stone etc,complete all as specified and as directed. |
| 61 | M&L for cement concrete type C2, 1:3:6 (40mm graded aggregate) as in surface channel and drains,complete all as specified and as directed. |
| 62 | Extra for forming fair finished drain channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified and as directed. |
| 63 | M&L for providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) and set in cement mortar 1:6 in landings, cover slabs (for manholes/ drain cover) etc,complete all as specified and as directed. |
| 64 | Taking down cement or cement lime plaster, on brick or stone walls,/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.any description, complete all as specified and as directed. |
| 65 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 finished surfaces even and smooth without using extra cement,complete all as specified and as directed. |
| 66 | M & L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed. |
| 67 | M&L 75 mm thick Cement concrete type C-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and as directed. |
| 68 | M & L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 69 | M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments, complete all as specified and as directed. |
| 70 | Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and as directed. |
| 71 | M & L 2nd Class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and as directed. |
| 72 | S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening, complete all as specified and as directed. |
| 73 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. |
| 74 | S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Including of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and as directed. |
| 75 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long,complete all as specified and as directed. |
| 76 | S&F in repairs vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap,complete all as specified and as directed. |
| 77 | S&F PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs, complete all as specified and as directed. |
| 78 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality, complete all as specified and as directed. |
| 79 | S&F In repair Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but icluding of fixing of supply and waste pipe , complete all as specified and as directed. |
| 80 | S & F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,complete all as specified and as directed. |
| 81 | S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 82 | S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe, complete all as specified and as directed. |
| 83 | S & F for Soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. |
| 84 | Taking down Gl water tubing and connections and taken in to schedule of credit for 15mm bore, complete all as specified and as directed. |
| 85 | S&F tubing, medium grade, galvanised, 15 mm bore with all fittings; fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 86 | S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors , complete all as specified and as directed. |
| 87 | S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement , complete all as specified and as directed. |
| 88 | S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement , complete all as specified and as directed. |
| 89 | S&F 100mm bore PVC (SWR) 'T' any radius, complete all as specified and as directed. |
| 90 | S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed. |
| 91 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 92 | S&F PVC (SWR) bends 75mm bore, complete all as specified and as directed. |
| 93 | S&F PVC (SWR) \\"T\\" 75mm bore, complete all as specified and as directed. |
| 94 | S&F in repair 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed. |
| 95 | Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc. |
| 96 | M&L for point wiring for using 1.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge. |
| 97 | (a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way. |
| 98 | (b) One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board. |
| 99 | (c) One 3 pin 3 Amp switch socket outlet on same board with accessories. |
| 100 | S&F switch piano flush type single pole, one way 5 Amp 240 volts, complete all as specified and as directed. |
| 101 | S&F socket oulet 2 in 1, 3 pin, 5 amps, Flush type, complete all as specified and as directed. |
| 102 | S&F socket oulet 2 in 1, 3 pin, 5 and 15 amps, Flush type, complete all as specified and as directed. |
| 103 | M&L for point wiring for using 2.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge. |
| 104 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed. |
| 105 | S&F Switch socket combination 2 in1, 3 pin,5 Amps and 15 Amp flush type universal, complete all as specified and as directed. |
| 106 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, , complete all as specified and as directed. |
| 107 | S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 108 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed. |
| 109 | S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, , complete all as specified and as directed. |
| 110 | S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, , complete all as specified and as directed. |
| 111 | S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, , complete all as specified and as directed. |
| 112 | S&F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed. |
| 113 | S&F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. |
| 114 | S& F LED light fitting 1x9W/1x10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 115 | S&F LED Lamp 10 Watt, complete all as specified and as directed. |
| 116 | M&L for PVC XLPE U/G with 2 core PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm, complete all as specified and as directed. |
| 117 | S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and as directed. |
| 118 | M&L for Sub class \\"B\\" bricks laid dry width wise across the line of cable in trenchs as cable protection, complete all as specified and as directed. |
| 119 | Taking down & dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, split pins, screws, nuts and spring washers complete including, flexible chord of 24/ 0.20mm with neccessary connector (for blade/ body) as required after rewinding complete all as specified and as directed. Note : Spares used and rewinding shall be measured and paid separately under relevant item |
| 120 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc. |
| 121 | S&F in repairs Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet, complete all as specified and as directed. |
| 122 | Note:- Schedule of credit Rs 1,41,175.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender