Tender For Repair/ Maintenance Of Plastering, Flooring, Periodical Services, Sanitary Fittings And Misc B/R Works At Substations In North Area & Bhagat Line Area Under Ge (U) Meerut Cantt.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
17 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Plastering, Flooring, Periodical Services, Sanitary Fittings And Misc B/R Works At Substations In North Area & Bhagat Line Area Under Ge (U) Meerut Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonary built in cement mortar in any position or in any description including PCC Copings and removing away unserviceable material complete all as specified and directed. |
| 2 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | ditto as per above item no-3 but except bricks complete all as specified and directed. |
| 4 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 5 | M&L for 15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound acomplete all as specified and directed. (WPC shall be measured separtely) |
| 6 | M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for 5 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of 1mm thick wall care putty, complete all as specified and directed. |
| 9 | M&L for applying two coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed. |
| 10 | M&L preparation of new steel surfaces of any desription , over 10 cm in girth not otherwise described two coat synthetic enamal paint over a coat of red oxide complete all as specified and directed. |
| 11 | M&L for new plastered surfaces applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm thick wall care putty. complete all as specified and directed. |
| 12 | M&L for complete removal of existing tretment for preparing old plastered surfaces applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm thick wall care putty. complete all as specified and directed. |
| 13 | Preparation of old plastered/unplastered wall surfaces and applying two coat of oil bound distemper over 1 mm thick wall care putty complete all as specifed. |
| 14 | M&L for applying two coats of white washing on ceiling including preparation of old plastered surfaces complete all as specified. |
| 15 | M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified. |
| 16 | M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.(Note:-Using roller for painting and use scrapping machine for scrapping work) |
| 17 | Dismantling post or struts (wood, steel or RCC) any position, including taking out embeded portion,concrete, brick work, masonary etc and making good disturbed ground complete all as specified and directed. |
| 18 | M&L for hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for door,balusters, noising to steps including embedding in concrete and screweing etc wind ties including securing bolts post and struts in fencing drilling holes,notching for wire etc flat iron fillets including necessary drilling, bolting and reveting etc or similar works including taking out old unsv stock complete all as specified and directed. |
| 19 | M&L for Mild Steel round bars Fe-410-W (Gde E-250) quality-A or Fe 290 (Gde E-165) for securing chain link fencing including taking out old unsv bars complete all as specified and directed. |
| 20 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. |
| 21 | Dismantling fencing wire, chain link, mesh fencing or any type and any position etc complete all as specified and directed. |
| 22 | S&F chain link fencing 4mm dia bar and mesh size 100x100mm complete including line wires of any mesh size and to any type of standards rails,straining bolts etc including provisioning of binding wire complete all as specified and directed. |
| 23 | Dismantling barbed wire of any description complete all as specified and directed. |
| 24 | M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. |
| 25 | M&L for Mild Steel nuts and bolts of size 12mm dia bolt exc 5cm but not exc 10cm long etc and dia of neck 10mm complete all as specified and directed. |
| 26 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 27 | Glazed ceramic coloured tiles 300mm x 200mm x 7/450X250x7 mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 28 | M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 29 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness below or above ground level, unreinforced and removing the rubbish out side MD land complete all as specified and directed. |
| 30 | M&L for 75mm thick , Plain cement concrete, (Nominal Mix), Type C-2, 1:3:6 (using 40mm graded crushed stone aggregates) as in floors finished rough surface to receive floor finishes,complete all as specified and directed. |
| 31 | M&L for Coloured chequered cement concrete tiles, with grey cement and no pigment machine pressed, factory made of size 250 x 250 x 22mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 32 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 33 | Taking down steel rolling shutters manually operated type with ball bearing cover hood and channel, anchoring rod etc of size upto 25 sqm each complete all as specified and directed. |
| 34 | M&L for Steel rolling shutters 1.25mm thick without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and directed. |
| 35 | S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 36 | S&F Ball bearing for rolling shutters as per existing complete all as specified and directed. |
| 37 | Repairs to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3/PCC to match the existing surface, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint, complete all as specified and directed. |
| 38 | Complete removing existing roof treatment any type and M & L for roof treatment with APP modified polymeric water proofing membrane,3mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) protrcted on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/sqm applied with bonding material using blown type bitumen primer grade 85/25 @ 1.20 kg/sqm over bitumen primer conforming to IS-3384 @ 0.40 kg/sqm with all overlaps including rendering 10 mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. |
| 39 | M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified. |
| 40 | S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane fixing in glass any height/ any stories without any financial effect complete all as specified and directed |
| 41 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified. |
| 43 | S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position compete in all respect as specified. |
| 44 | M&L for replacement of 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed. |
| 45 | S&F in repair looking mirror 5 mm thik of requerd size including fixing ss studs/screw complete all as specified and directed. |
| 46 | S&F in repair 15 mm pillar taps , cast copper alloy, with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified. |
| 47 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 48 | S&F in repir stainless steel grating doom 100/150mm dia with or without hole complate all specified and directed. |
| 49 | S&F in repair 32/40 mm dia and 750mm long PVC waste pipe for WHB/sink complete all as specified and directed. |
| 50 | S&F in repair bib Tap of PTMT any colour 15mm dia complete all as specified and directed. |
| 51 | S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), three layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed. |
| 52 | Supply and fixing in repair ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed |
| 53 | Supply and fixing in repair angle valves cast copper alloy 15 mm, chromimum plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed. |
| 54 | S&F as in repair bib tap 15mm bore fancy type chromium plated , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed bib tap 15mm bore fancy type chromium plated complete all as specified and directed. |
| 55 | S&F in repair Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet and incl PVC P and S trap, connection to drain pipe and to flushing pipe, including making good to floor to match with the exisitng complete all as specified and directed. |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost to Govt.) complete all as specified and directed |
| 57 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost) complete all as specified and directed. |
| 58 | Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified and directed. |
| 59 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive ofM.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 60 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 61 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 62 | S&F Factory made single extruded WPC (Wood Polymer Composite) Skelton WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges, wire mesh and necessary S S screws shall be paid separately etc complete all as specified and directed. |
| 63 | S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated) fittings such as handle clips (suitable size), locking device, and glazing in panels with 3.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire meshu sing Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt complete all as specified and directed. |
| 64 | S &F Framed work as in doors or gates of angle or other section FE 410 -W (gde E-250)qualit with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including taking out old unsv iron complete all as specified and directed. |
| 65 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified and directed. |
| 66 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to 8B.10 and drawing on page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery such as wer bolt (one Nos each Shutter 150 mm long) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy duty MS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc complete all as specified and directed. |
| 67 | S&F in repair 100mm long Butt hinges, extruded aluminium alloy with galvanised stainless steel hinge pin, anodised and fixed,type B-21 complete all as specified and directed. |
| 68 | S&F in repair of 200 mm long stainless steel barrel tower bolts, extruded section complete all as specified and directed. |
| 69 | S&F in repair of stainless steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed. |
| 70 | S&F in repair of 150 mm long stainless steel pressed steel handle, oval type, stove enameled black complete all as specified and directed. |
| 71 | Taking Down Cement plaster/duster bed PCC of column, chajja , paraphet of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4 (average thickness of PCC 25 mm) as required brushing neat cement slurry with 3.0 kg of cement per sq metre including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surface complete all as specified and directed. |
| 72 | M&L for precast cement concrete jallies 25 mm thick type B0 1:2:4 (12.5 mm graded aggregate) (measured solid set in cement mortar 1:4 incl all moulding and necessry form work, complete all as specified and directed. |
| 73 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 74 | Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-250) quality-A, steel work duly painted with one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and directed. |
| 75 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed. |
| 76 | M&L for prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick AZ 150 of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 77 | M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick AZ 150 of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 78 | M&L uprooting of plants (girth n.exc 15 cm of trunk to any type of plants 100 ml grown along the pipes or walls chajjas, parapets and roof of building at any height (incl multistoried) and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender