Tender For Repair/Replacement Of Interlocking Tiles, Chequered Tile, Outdoor Tiles, Hardstanding And Plain Cement Concrete Items And Repair/Maint To Certain Wooden Furniture Including Painting /Polishing At Af Station Najafgarh Under Ge (Af) Under Tu
Tender Value
31 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
20 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Interlocking Tiles, Chequered Tile, Outdoor Tiles, Hardstanding And Plain Cement Concrete Items And Repair/Maint To Certain Wooden Furniture Including Painting /Polishing At Af Station Najafgarh Under Ge (Af) Under Tughlakabad
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15cm thickness below or above ground level and removal all material outside the defence land complete all as specified and directed. |
| 2 | M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate fininshing the concrete surface even and fair. |
| 3 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 4 | M&L Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as specified |
| 5 | M&L for OUT DOOR coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified MAKE-ENDURA BY NITCO OR EQUIVALENT |
| 6 | M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 7 | M&L 25 mm thick chequered cement concrete coloured tiles glossy finished of any shape any size set jointed and pointed in neat cement slurry in floors with grey cement and no pigments. |
| 8 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 9 | Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified |
| 10 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious built in CM (1:4 ) complete all as specified and as directed. |
| 11 | M&L Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggrgate as in foundation filling and mass concrete complete all as specified and as directed. |
| 12 | M&L for Plain cement concrete (1:2:4) type B-1, using 20mm graded crushed stone aggregate as in coping including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 13 | Materials and Labour for Extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds etc complete all as specified and directed. |
| 14 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 15 | M&L 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for washing the bore with compressed air (Pressure not less than 250 PSI & 400 Cubic feet/min capacity) to improve porosity and taking out all the sedimentation silt, deposited at a distance exc 50m complete all as specified and directed by Engr - in - charge. |
| 17 | M&L Loose filling with aggregates of gauge 40 to 80 mm broken stone or boulders in rain water harvesting, soakage pits, soakage wells etc complete all as specified and directed by Engr-in-Charge. |
| 18 | Cutting of bushes, weeds, vegatator etc are thrown away all the waste to a distance exceeding 250mtr from oxidator pond complete all as specified and directed by Engr-in-Charge |
| 19 | M&L for removing silt/soil, any description from strom drain including of taking off drain cover and put it on position after cleaning the storm water drain of any size complete all as specified |
| 20 | M&L in replacement for pre cast perforated RCC drain cover with frame (rectangular or square) the area of each cover should not be more than 0.5 square mtr and thickness of 60mm each with holes manufactured with M-30 grade of concrete by Vibro Compaction process using accurately designed molds and as suitable reinforced to enable the covers to take load as specified i.e 20 MT for Heavy duty (when tested as per IS-12592). |
| 21 | M&L for Precast cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in manhole/drain cover slabs etc including necessary form work and set in cement mortar 1 : 4 |
| 22 | M&L TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spi-rally hooping for columns, hook-ing ends and binding with and including mild steel wire (an-nealed) not less than 0.90mm dia, complete all as specified and directed. |
| 23 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge. |
| 24 | M&L for 16 to 18 mm thick Granite (of any tpe) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 25 | M&L moulded design/decorative choice (Jafri) Dholpur stone 20 to 25 mm thickness gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including design decorative choice dholpur post 125 x 125mm embeded in brick wall, making groove on both side dholpur post of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment including dismantling old stone and tile Stone slabs and tiles of any description or thickness in wall, floors, aprons etc. |
| 26 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings |
| 27 | M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 28 | M&L Complete removal of existing treatment on walls and applying two coat of cement based paint complete all as specified and directed. |
| 29 | A) Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing everypart in-tact as applicable as per drgs. Work shall be executed at User Unit areas of different Offices and Mess of AF Stn Najafgarh including BSO's Furniture Yard as directed by Engineer-in-Charge. |
| 30 | Table Dining 6 Persons : FD-30, 273, 239, FD/MAP-II/03 a) Top with 18/19mm MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge. |
| 31 | (b) Replacement of U/S triangular bracket 60x60x25 mm to make intact and strengthen as per drg. |
| 32 | c) Legs as per drg. |
| 33 | d) Long Rail as per drg. |
| 34 | e) Short Rail as per drg. |
| 35 | Table Dining 8 Persons : FD-30, 273, 239 a)Top with 18/19mm MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge. |
| 36 | b) Legs as per drg. |
| 37 | c) Long Rail as per drg. |
| 38 | d) Short Rail as per drg. |
| 39 | (e) Replacement of U/S triangular bracket 60x60x25 mm to make intact and strengthen as per drg. |
| 40 | Table Writing/Medium/Study : FD-33, 249, 275 a) Top with 18/19mm MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge. |
| 41 | b) Legs as per drg. |
| 42 | c) Foot rest / Stifener as per drg. |
| 43 | d) Bottom Rail as per drg. |
| 44 | e) Sides of cabinet with 18mm thick ply wood with 1.5mm thick teak wood as per drg. |
| 45 | f) Short Rail as per drg. |
| 46 | g) Front/Long Rail as per drg. |
| 47 | h) Drawer as per drg. |
| 48 | j) Ionized Aluminium Knob as per drg. |
| 49 | k) Cabinet Door with locking system. |
| 50 | Peg Table : FD-25, 384,277,236 a) Top with 18/19mm MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge. |
| 51 | b) Legs as per drg. |
| 52 | c) Stiffner as per drg. |
| 53 | d) Top long Rail as per drg. |
| 54 | (e) Replacement of U/S triangular bracket 60x60x20 mm to make intact and strengthen as per drg. |
| 55 | Table Bed Side : FD-28(M), 248, 276a) Back ply as per drg. |
| 56 | b) Base Leg as per Drg |
| 57 | Table Centre/Table Center Two Tier : FD-29, 235, 274a) Top with 18/19mm MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge. |
| 58 | b) Legs as per drg. |
| 59 | c) Top battern short Rail as per drg. |
| 60 | d) Top battern long Rail as per drg. |
| 61 | (e)Replacement of U/S triangular bracket 60x60x20 mm to make intact and strengthen as per drg. |
| 62 | f) Stiffner as per drg |
| 63 | Side Board : FD-241, 371, 26(M), 1112a) Back ply as per drg. |
| 64 | b) Door shutter as per drg. |
| 65 | c) Drawer as per drg. |
| 66 | d) Top 18/19mm MDF Board as per drg |
| 67 | e) Base Leg as per drg. |
| 68 | f) CP knob as per drg. |
| 69 | Teapoy : FD- 34, 232, 278, 382a) Top with 18/19mm MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge. |
| 70 | b) Front Rail as per drg. |
| 71 | c) Legs as per drg. |
| 72 | d) Stiffner as per drg. |
| 73 | e) Replacement of U/S triangular bracket 60x60x20 mm to make intact and strengthen as per drg. |
| 74 | Hat Stand with Mirror : FD-23(M), 233, 206a) Mirror as per drg |
| 75 | b) Back ply as per drg. |
| 76 | c) Front ply as per drg. |
| 77 | d)Pegs as per drg. |
| 78 | e) MS Key hole as per drg. |
| 79 | Table dressing ladies with mirror: FD-378, 251, 32a) Looking mirror as per drg. |
| 80 | b) Glass of shutter with aluminium channel as per drg. |
| 81 | c) Back of side of table with 6 mm thick plywood commerical as specified in drg. |
| 82 | d) Drawers as specified in drg. |
| 83 | e) Knobs as per specified in drg. |
| 84 | a) Table dressing gents with mirror.: FD-31, 230, 379Looking mirror as per drg.: |
| 85 | b) Back side ply as specified in drg. |
| 86 | c) Drawers as specified in drg. |
| 87 | d) Knobs as per specified in drg. |
| 88 | a) Chair Dining : FD-16(M), 203,228,279, FD/MAP-II/052mm wide Caning as per drg. |
| 89 | b) Front Leg as per drg. |
| 90 | c) Back/Rear Leg as per drg. |
| 91 | d) Leg Stiffner as per drg. |
| 92 | e) Front/Rear/side Rail as per drg. |
| 93 | f) Back Stiffner as per drg. |
| 94 | (g) Replacement of U/S triangular bracket 60x60x25 mm to make intact and strengthen as per drg. |
| 95 | h) Removing unserviceable canning Patti and S&F new canning Patti as per existing and as per drg. |
| 96 | a) Chair dinning Officers / Long Back : FD/MAP-II/04, 357, WDF-2/93Front Leg as per drg. |
| 97 | b) Back/Rear Leg as per drg. |
| 98 | c) Leg Stiffner as per drg. |
| 99 | d) Front rail as per drg. |
| 100 | e) Seat Top rail as per drg |
| 101 | f) Back curved teak wood vertical strip as per drg |
| 102 | g) Complete seat alongwith 75mm thick 40 density foam with upholstry not than 300/- per RM and 12 mm thick BWP plywood |
| 103 | h) Seat Foam 75mm thick 40 density with upholstry not less than 300/- RM as per drg |
| 104 | j) Upholstry not less than 300/- RM as per drg |
| 105 | k) Replacement of U/S triangular bracket 60x60x25 mm to make intact and strengthen as per drg. |
| 106 | a) Chair Writing : FD-280,250, 20(M)2mm wide Canning as per drg. |
| 107 | b) Front Leg as per drg. |
| 108 | c) Back/Rear Leg as per drg. |
| 109 | d) Side Stiffner as per drg. |
| 110 | e) Middle stiffner |
| 111 | f) Front Rail as per drg. |
| 112 | g) Side Rail / Rear Rail as per drg. |
| 113 | h) Armrest as per drg. |
| 114 | j) Removing unserviceable canning Patti and S&F new canning Patti as per existing and asper drg. |
| 115 | k) Replacement of U/S triangular bracket 60x60x25 mm to make intact and strengthen as per drg. |
| 116 | a) Chair Easy : FD-17M), 201, 229 2mm wide Canning including seat and back as per drg. |
| 117 | b) Front Leg as per drg. |
| 118 | c) Back/Rear Leg as per drg. |
| 119 | d) Front/Rear Rail of seat frame as per drg. |
| 120 | e) Armrest as per drg. |
| 121 | f) Removing unserviceable canning Patti and S&F new canning Patti as per existing and asper drg. |
| 122 | g) Replacement of U/S triangular bracket 60x60x25 mm to make intact and strengthen as per drg. |
| 123 | a) Sofa set 5 seater with Arms : FD-281,258, 373, FD/MAP-II/02M&L replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density (Make: Sleepwell/Kurlon/Coolfoam) as per drg. |
| 124 | b) Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new cushion cover made out of approved tapestry cloth not less than Rs 300/-per mtr of 48\\" wide duly stiched with fine thread alongwith zip facilicity all as specified and directed in respective drgs. |
| 125 | c) Replacement of Seat / Back BWP (IS-710) 12mm ply of sofa 3 seater as per drg |
| 126 | d) Replacement of Seat / Back BWP (IS-70) 12mm ply of sofa single seater as per drg |
| 127 | (B) Petty Repair to Wooden Furniture acticles such as tightening of table top, refixing of loose brackets, fixing of legs, stiffeners, PVC Seats, Plywood, arms, refixing of bolt, handles, hinges, knobs, channels, locks, easing of drawers, refixing of beading with nails/screws to make furniture functional completed all as directed.Note : -1. All T&P and necessary Nail, Screw, Nut & Bolt etc will be provided by the contractor for smooth working. 2. All repair work in one furniture article will be considered as single repair. |
| 128 | (C) M&L for one coat of touch wood to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items polishing all as specified and shown on drgs and directed by Engineer-in-Charge.Polishing with touchwood to:- : FD-16(M), 228,279, 203, FD/MAP-II/05 for to Chair Dining |
| 129 | Description all as per item No 128 above but for Chair Writing :FD-280,250, 20(M) |
| 130 | Description all as per item No 128 above but for Chair easy :FD-17(M),229,201 |
| 131 | Description all as per item No 128 above but for Hat Stand with Mirror : FD-23(M), 233,206 |
| 132 | Description all as per item No 128 above but for Peg table FD-384,236 ,25, 277 |
| 133 | Description all as per item No 128 above but for Side board FD-241, 371, 26(M),1112 |
| 134 | Description all as per item No 128 above but for Sofa Set 5 seater FD-281, 258, 373, FD/MAP-II/02 |
| 135 | Description all as per item No 128 above but for Table dining 6 pers FD-30, 273, 239, FD/MAP-II/03 |
| 136 | Description all as per item No 128 above but for Table dining 8 pers FD-30, 273, 239 |
| 137 | Description all as per item No 128 above but for Table bed side FD-248, 276, 28(M), 210 |
| 138 | Description all as per item No 128 above but for Table centre FD-29, 235 & 274 |
| 139 | Description all as per item No 128 above but for Table wrtiting/Medium/Study FD-33, 249, 275 |
| 140 | Description all as per item No 128 above but for Teapoy FD-278, 382, 34, 232 |
| 141 | Description all as per item No 128 above but for Table dressing gents. FD-31, 230 & 379 |
| 142 | Description all as per item No 128 above but for Table dressing ladies. FD-378, 251, 32, |
| 143 | Description all as per item No 128 above but for Chair dining long back. FD 357, WDF-2/93, FD/MAP-II/04 |
| 144 | Replacement of U/S PVC shoes of all types of wooden Chairs, Tables,Stool CB dressing and sofa set and Supply and Fix new PVC shoes as per drg. FD-16(M), 228,279, 203, FD/MAP-II/05, FD-280,250, 20(M), FD-17(M),229,201, FD-384,236 ,25, 277, FD-281, 258, 373, FD/MAP-II/02, FD-258,281, 373, FD-27(M), 252,282,374, FD-30, 273, 239, FD/MAP-II/03, FD-258,281, 373, FD-29, 235, 274, FD-33, 249, 275, FD-278, 382, 34, 232, FD-45(M), 237, WDF-7 & 45/99, VASF-98, FD 357, WDF-2/93, FD/MAP-II/04 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender