Tender For Addn/ Altn And Improvement To P-305 And Unit Armoury And Provn Of Clothing Drying Facility At Certain Smqs And Tmqs At Hqtc Bangalore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Jul 2026
18 days left
EMD
55928
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn And Improvement To P-305 And Unit Armoury And Provn Of Clothing Drying Facility At Certain Smqs And Tmqs At Hqtc Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK: ADDN/ ALTN AND IMPROVEMENT TO P-305 AND UNIT ARMOURY AND PROVN OF CLOTHING DRYING FACILITY AT CERTAIN SMQs AND TMQs AT HQTC BANGALORE CONTRACT AGREEMENT: GE(AF)/B/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Demolition of brick work or stone/ boulder masonry/ precast concrete block walling, built in cement mortar including all quoins, pillars etc., disposal of unserviceable materials, debris and rubbish to a distance complete all as specified and as directed by Engr-in-charge. (Item 1 of Job A + item 26 of Job B) |
| 3 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. (Item 2 of Job A + item 27 of Job B) |
| 4 | Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 (Using 20mm graded stone aggregate) and setting in cement mortar 1:6 in walls complete all as specified and as directed by Engr-in-charge. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. (Item 4 of Job A + item 25 of Job B) |
| 6 | Material and labour for clay moulded terracota jalli blocks of intricate design, patterns and shapes, kiln burnt, size of each block 220x220x63mm, binded using approved adhesive, fixed to mild steel frame work as required and colouring the tiles with terracota shade for aesthetic appearance complete all as specified and as directed by Engr-in-charge.Note: Mildsteel work shall be measured and paid separately. |
| 7 | Material and labour for 25mm thick PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and as directed by Engr-in-charge. (Item 6 of Job A + item 28 of Job B) |
| 8 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge. |
| 11 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed by Engr-in-charge.Note: Sheet glass and SS wiremesh shall be measured and paid separately. |
| 12 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 nos) suitable handle (1 no) complete all as specified and as directed by Engr-in-charge.Note: Sheet glass and SS wiremesh shall be measured and paid separately. |
| 13 | Supply and fix for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including beads complete all as specified and as directed by Engr-in-charge. |
| 14 | Supply and fix for 4.8mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks truss for roofing and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engr-in-charge. |
| 16 | Material and labour for plain cement concrete (1:3:6), type C2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 17 | Supply and fix for mild steel tubular trussed, purlins, fencing posts, crane gantries rails and fastenings including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to 1979 grade St-240 including distance pieces, cleats, nuts and bolts any size and length etc., complete all as specified and as directed by Engr-in-charge. (Item 16 of Job A + item 7 of Job B) |
| 18 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply and fix for prepainted galvalume aluminium zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix in repairs 18mm thick veneered decorative plywood, grade 1 (with BWR resin), with decorative face veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves, almirahs etc., complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix in repairs brass mortice lock, vertical type, size 100mm 4 levers include for escutcheon plates and two keys complete all as specified and as directed by Engr-in-charge. |
| 23 | Supply and fix for 100mm long mortice latch with two levers (vertical type), brass body and fixed complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for stainless steel clip on auto closing panel concealed hinges thickness 15-22mm for full overlay door 0 degree crank for cupboard door complete all as specified and as directed by Engr-in-charge. |
| 25 | Supply and fix for magnetic catch complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply and fix for 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply and fix for 100mm long extruded brass handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix for 150mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply and fix for 200mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. (Item 28 of Job A + item 88 of Job B) |
| 30 | Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix in repairs 300mm size mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed by Engr-in-charge. (Item 32 of Job A + item 13 of Job B+ item 13 of Job C) |
| 34 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 35 | Material and labour for 40mm thick PCC 1:2:4, type B0 (Using 12.5mm graded stone aggregate) as in flooring complete all as specified and as directed by Engr-in-charge. |
| 36 | Material and labour for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 37 | Material and labour for coloured designed chequered cement concrete tiles of a size 400x400x25mm thick with white cement and pigment in floors etc., include 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 38 | Material and labour for 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engr-in-charge. |
| 39 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and fixing of vertical surfaces with backing up on vertical surfaces including rubbing and polishing complete all as specified and as directed by Engr-in-charge. |
| 40 | Material and labour for granite (of any type) 18-20mm thick (table rubbed and polished) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads including cutting and polishing of tiles and 20mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 41 | All as per item No.39 here-in-before but vertical surfaces with 10mm thick rendering of cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 42 | Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces of ceilings complete all as specified and as directed by Engr-in-charge. (Item 41 of Job A + item 16 of Job B) |
| 43 | Material and labour for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified and as directed by Engr-in-charge. |
| 44 | Material and labour for preparing new plastered surfaces and applying through mechanical means two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by Engr-in-charge.(Item 43 of Job A + item 18 of Job B) |
| 45 | Material and labour for preparing old plastered surfaces and applying one coat of cement base paint through mechanical means complete all as specified and as directed by Engr-in-charge.(Item 44 of Job A + item 22 of Job B) |
| 46 | Material and labour for preparing new plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 47 | Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide priming complete all as specified and as directed by Engr-in-charge. .(Item 47 of Job A + item 8 of Job B) |
| 49 | Supply and fix for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed by Engr-in-charge.Note: Each line wire to be measured. |
| 50 | Supply and fix in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed by Engr-in-charge.Note: Each line wire to be measured. |
| 51 | Repair to existing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining including strenthing, tighting, and binding with new or old fencing post/ flat iron /nuts, bolt etc., complete all as specified and as directed by Engr-in-charge.Note: Fencing post /flat iron /nuts, bolts etc., required as new item will be measured and paid. |
| 52 | Supply and fix for mild steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc., complete all as specified and as directed by Engr-in-charge. |
| 53 | Supply and fix for mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexogonal or square nuts 5 to 10mm dia and exc 5cm but not exc 10cm long complete all as specified and as directed by Engr-in-charge. |
| 54 | Supply and fix for mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexogonal or square nuts 20mm dia and 15cm long complete all as specified and as directed by Engr-in-charge. |
| 55 | Supply and fix for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 56 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 57 | Material and labour for rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 58 | Material and labour for rendering 10mm thick cement plaster in cement mortar 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply only liquid water proofing compound complete all as specified and as directed by Engr-in-charge. |
| 60 | Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 61 | Material and labour for preparing new plastered surfaces of wall and applying three coat of white wash on surfaces of walls complete all as specified and as directed by Engr-in-charge. |
| 62 | Material and labour for preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., incl washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of white washing complete all as specified and as directed by Engr-in-charge. |
| 63 | Material and labour for preparation of old decorated plastered or unplastered surface on ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying two coats of white washing complete all as specified and as directed by Engr-in-charge. |
| 64 | Material and labour for preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., incl washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion on walls complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 66 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 67 | Material and labour for 100mm thick PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in sub-base layer complete all as specified and as directed by Engr-in-charge. |
| 68 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.09 sqm but not exc 0.11 sqm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 69 | Material and labour for coloured glazed ceramic design tiles 450x300x7-8mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 70 | Material and labour for granite (of any type) tiles 18-20mm thick (table rubbed and polished) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in flooring and landings of staircase, treads including cutting and polishing of tiles and 20mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 71 | All as per item No.69 here-in-before but vertical surfaces with 10mm thick rendering of cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 72 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply and fix for 40mm dia PVC pipe with all necessary fittings on walls /floor or laying in floors of outer diameter of pipe in 40 mm complete all as specified and as directed by Engr-in-charge. |
| 74 | Supply and fix for 40mm dia elbow complete all as specified and as directed by Engr-in-charge. |
| 75 | Supply and fix for 40mm dia Tee complete all as specified and as directed by Engr-in-charge. |
| 76 | Taking down rain water pipes including all fittings any size and pattern upto 10th storey floors complete all as specified and as directed by Engr-in-charge. |
| 77 | Material and labour for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge. |
| 78 | Material and labour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge. |
| 79 | Material and labour for 150mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rain water pipe complete all as specified and as directed by Engr-in-charge. |
| 80 | Supply and fix in repairs 75mm dia., PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 81 | Supply and fix in repairs 110mm dia., PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 82 | Supply and fix in repairs 150mm dia., PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge. |
| 84 | Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge. |
| 85 | Supply and fix in repairs 110mm dia., vent cowl complete all as specified and as directed by Engr-in-charge. |
| 86 | Material and labour for 75mm bore PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge. |
| 87 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by Engr-in-charge. |
| 88 | Taking up or down 40mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 89 | Supplying and laying of 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed by Engr-in-charge. |
| 90 | Supply and fix for brass elbow for 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 with special fittings complete all as specified and as directed by Engr-in-charge. |
| 91 | Supply and fix for brass Tee for 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 with special fittings complete all as specified and as directed by Engr-in-charge. |
| 92 | Supplying and laying of 32mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed by Engr-in-charge. |
| 93 | Supply and fix for brass elbow for 32mm CPVC pipes SDR 11 and plain CPVC SDR 11 with special fittings complete all as specified and as directed by Engr-in-charge. |
| 94 | Supply and fix for brass Tee for 32mm CPVC pipes SDR 11 and plain CPVC SDR 11 with special fittings complete all as specified and as directed by Engr-in-charge. |
| 95 | Supply and fix for CPVC 25mm dia brass union complete all as specified and as directed by Engr-in-charge. |
| 96 | Supply and fix in repairs fancy type CP 2 way bib cock with wall flanges complete all as specified and as directed by Engr-in-charge. |
| 97 | Supply and fix in repairs corner glass shelf, fancy type complete all as specified and as directed by Engr-in-charge. |
| 98 | Supply and fix in repairs fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 99 | Supply and fix in repairs 15mm bore chromium plated fancy type long body bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge. |
| 100 | Supply and fix in repairs 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boards on commercial plywood including provn for hanging clips complete all as specified and as directed by Engr-in-charge. |
| 101 | Supply and fix for brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with and incl chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed by Engr-in-charge. |
| 102 | Supply and fix for vitreous china ware wash hand basin white, flat back, size 550x400mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed by Engr-in-charge. |
| 103 | Supply and fix in repairs PVC flushing cistern 10 ltrs capacity valveless syphonic action type low level, white, with inlet, ball valve float and handle including brackets and flush pipe complete all as specified and as directed by Engr-in-charge. |
| 104 | Supply and fix in repairs PVC connection 15mm size 450mm long with CP PTMT nuts complete all as specified and as directed by Engr-in-charge. |
| 105 | Supply and fix in repairs standard PVC waste pipe 32mm dia., for WHB complete all as specified and as directed by Engr-in-charge. |
| 106 | Supply and fix in repairs 32mm dia., waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge. |
| 107 | Supply and fix in repairs 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed by Engr-in-charge. |
| 108 | Supply and fix in repairs fancy type 15mm bore angle stop valves, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge. |
| 109 | Supply and fix in repairs CP health faucet including 1m length SS conncting pipe complete all as specified and as directed by Engr-in-charge. |
| 110 | Supply and fix for vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge. |
| 111 | Supply and fix for fancy type 15mm bore concealed cock, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge. |
| 112 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 113 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed by Engr-in-charge. |
| 114 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and refixing in same opening after easing and adjusting complete all as specified and as directed by Engr-in-charge. |
| 115 | Supply and fix for factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed by Engr-in-charge. |
| 116 | Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening complete all as specified and as directed by Engr-in-charge. |
| 117 | Material and labour for preparation of untreated new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed by Engr-in-charge. |
| 118 | Material and labour for preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. |
| 119 | Material and labour for preparation of old painted surface of any description not otherwise described wood and wood based surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. |
| 120 | Material and labour for 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge. |
| 121 | Supply and fix for 75mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed by Engr-in-charge. |
| 122 | Supply and fix for 125mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge. |
| 123 | Supply and fix for 125mm aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-charge. |
| 124 | Supply and fix for 150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-charge. |
| 125 | Supply and fix for 100mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed by Engr-in-charge. |
| 126 | Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-charge. |
| 127 | Supply and fix for 150mm aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-charge. |
| 128 | Material and labour for anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed by Engr-in-charge. |
| 129 | Supply and fix for vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including vitreous china urinal partition white of size 310x700mm complete all as specified and as directed by Engr-in-charge. |
| 130 | Remove of plants/ bushes with roots from wall and concrete surfaces and applying herbicide 2, 4-Dichlorophenoxyacetic acid as required and make the disturbed area with PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) or cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 131 | Supply and fix for clothes drying systems wall stand aluminium (Model: Mount it 20 – 4 pipes, 5 ft each) wall mounted stand consisting of four anodized aluminum pipes, each of outer dia 22mm and inner dia 19.8mm, mounted on anodized aluminium angle of size 30x30x3mm complete all as specified and as directed by Engr-in-charge. |
| 132 | Material and labour for two coats of exterior emulsion paint (weather coat) over a coat of approved primer including preparation of new surfaces complete all as specified and as directed by Engr-in-charge. |
| 133 | Supply and fix for flame proof/ weather proof direct entry type switch single pole ON and OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230 Volts 10 Amps, AC ON/OFF switch operated externally by knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on wall/ steel structure etc., duly tested and certified by CMRI complete all as specified and as directed by Engr-in-charge. |
| 134 | Supply and fix for flame proof /weather proof direct entry rotary type fan speed controller, comprising multi-step rotary switch (minimum 5 steps) in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230 Volts 25 Amps, AC speed control switch operated externally by knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on wall/ steel structure etc., duly tested and certified by CMRI complete all as specified and as directed by Engr-in-charge. |
| 135 | Supply and fix for LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIIB, Zone 1 and 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc., complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-charge. |
| 136 | Supply, installation, testing and commissioning of automatic ON/OFF timer-based control panel for alternate operation of multi (two of more than two) air conditioners, comprising programmable digital time switch, contactors, MCB protection, wiring and interlocking system, housed in powder-coated steel sheet enclosure of suitable size, complete with all accessories, internal wiring, earthing, and connections, suitable for 230V AC supply, including making necessary connections to existing AC units and testing complete in all respects. Automatic ON/OFF based on programmable timer, controls more than 2 Nos split/ window AC units (1.5 - 3 TR typical) for alternate operation of AC complete all as specified and as directed by Engr-in-charge. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender