Tender For Repair And Maintenance To Various Quarters Of Dgqa Badarpur And Repair To Fencing/Compound Wall,Gates, Footh Path And Other Misc Works At Dgqa Complex Badarpur Under Ge (Af) Tughlakabad
Tender Value
35 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
20 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Various Quarters Of Dgqa Badarpur And Repair To Fencing/Compound Wall,Gates, Footh Path And Other Misc Works At Dgqa Complex Badarpur Under Ge (Af) Tughlakabad
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed |
| 2 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge |
| 3 | S & F Factory Made Solid PVC Moulded Door Shutter with particle board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR and as directed by Engineer-in-Charge |
| 4 | S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete. |
| 5 | S&F Aliminium anodised barrel tower bolts, 150 mm long complete. |
| 6 | S&F Aluminium anodised handles, cast type anodised 125 mm long complete. |
| 7 | S&F Aluminium Anodized powder coated aluminium frame for doors , windows, ventilators, partion wall with one or more rebates including joining cleat for fixing etc completet all as specified. (thikness of powder coating is 50 micron) |
| 8 | S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for glass pan without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specified handles 1 Nos in each window, hinges, aluminium snap beading screws complete all as specified. |
| 9 | S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for wire mesh without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each window, hinges, aluminium snap beading screws complete all as specified. |
| 10 | Supply and fixing 7mm thick aluminium grill of make ' Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge. |
| 11 | S&F 5.50 mm thick plain sheet glass panes and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified. |
| 12 | S&F 4.0 mm thick plain sheet glass panes and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified. |
| 13 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks ro galvanised wire stapple |
| 14 | S&F in repair 18/19 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work rebate suitable for cup board shutters complete all as specified. |
| 15 | M&L for post Anti termite reatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as spfd and directed |
| 16 | M&L for post Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre tocentre and and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as spfd and directed |
| 17 | M&L for refixing SS letter on wall at height upto 15 Mtr with SS screws and Fastener as directed. |
| 18 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames). |
| 19 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 20 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 21 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast , filling back side of pressed steel door frames etc complete all as specified and as directed. |
| 22 | M &L Flush shutters,30mm thick solid core construction, with block board core and plywood face panels, commercial type on one sides with 0.9mm thick decorative laminate type 1 on both side and lipping/frame to match surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions. |
| 23 | S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,wire gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats. |
| 24 | S&F 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides all as specified. |
| 25 | S&F 18/19 mm thick Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber /frame work with rebate suitable for cup board shutters complete all as specified. |
| 26 | S&F galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified. |
| 27 | S&F in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified. |
| 28 | S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 |
| 29 | S&F 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified. |
| 30 | S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed. |
| 31 | S&F 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and as directed. |
| 32 | S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and as directed. |
| 33 | M&L demolition of old existing loose/unsound weaken mixture of binding material such as cement and fine aggregate(<4.5mm retained on IS sieve) of any description and in ay position from exisiting internal surface of RC components or any surface having average profundity of 15mm by hand tool that has a long metal blade with a sharp edge at end chisel and hammer or user robust pneumatic chisel/hand tools and removal from MoD land including M&L for applying one coat of mixture of two monomer unsatured liquid hydrocarbon and geseous hydrocarbon and polymesrized them to get the high polymer dispersion emulsion can be succesfully bond to cement mortar , which improved adhesion to concrete, offers the better durability, reduces the shrinkage and increase the flexiblity and resitant to emulsification oin damp condition modified. Ensuring no porosity in new/old surface on dilapidated girders or reinforcement encased in concrete complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for applying hydraulic binders, osmotic and complexing admixture passivation additives passivating protective matrix and welded MS wire cloth weigh not less than 1Kg/Sqm with 20mm thick one component chloride free shear thining fibre reinforced polymer modified, additives reduce or eleminate internal rust and corrosion by neutralizing acids and forming a chemical protective barrier to repel moisture from metal surface corrosion inhibiting additive, primer MUCIS for exposed corroded visible steel forming a continous film not less than 250 micron of single component conforming to EN 1504-7-2006 and preparing the surface to receive the bled of epoxy and sand including providing necessary propotions complete all as spfd and directed by Engr in charge. Make : Thermax, M/s Sika India Ltd , M/s STP Ltd |
| 35 | M&L for taking out old broken glass of any description from old wooden or metal frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and as directed. All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item. |
| 36 | M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 37 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete. All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item. |
| 38 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified. All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item. |
| 39 | S&F in repair single vitreous china wash down water closet pan with cistern (wall/floor mounted closet) including flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe with complete fittings all as specified and as directed. |
| 40 | S & F in repair PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed. |
| 41 | S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed. |
| 42 | S&F in repair pillar tap cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe pipe and fixed with 15mm bore in repairs |
| 43 | S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed. |
| 44 | S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm etc complete all as specified. |
| 45 | S&F in repair angle valves CP screwed down high pressure of fanciy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore in repairs |
| 46 | S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed |
| 47 | S & F in repair of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed. |
| 48 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. |
| 49 | S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed. |
| 50 | S&F in repair bib tap of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed in repairs |
| 51 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed. |
| 52 | S&F in repair 125mm dia grating doom with/without waste hole of chromium plated all as directed by Engr-in-Charge . |
| 53 | S&F in repair (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. Please Enable Macros to View BoQ information |
| 54 | S&F in repair (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender