Tender For maintenance Of Different L.I. Schemes Of Panisagar Nagar Panchayat & Damcherra Rd Block Under Water Resource Sub-Division Panisagar, North Tripura During The Year 2026-27/ Sh:- Repairing Of Pump Motor Panel Board & Suction Delivery Line.
Tender Value
10.24 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
3 days left
EMD
20490
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of Different L.I. Schemes Of Panisagar Nagar Panchayat & Damcherra Rd Block Under Water Resource Sub-Division Panisagar, North Tripura During The Year 2026-27/ Sh:- Repairing Of Pump Motor Panel Board & Suction Delivery Line.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in-Charge.For LI |
| 2 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality.a) 150 mm φ |
| 3 | b) 190 mm φ |
| 4 | Providing & fitting fixing coupling nuts & bolts (all Size)of approved quality.For LI. |
| 5 | Providing & fitting fixing coupling rubber bush (All Size) of approved quality.For LI. |
| 6 | Providing & fitting fixing coupling star bush (All Size) of approved quality.150 mm dia |
| 7 | Providing & fitting fixing Pump Shaft of approved quality. |
| 8 | Providing & fitting fixing Shaft sleeve bush of approved quality.a) Cast iron For LI |
| 9 | Providing & fitting fixing Casing ring of approved quality.150 mm dia, 8 mm thick. |
| 10 | Providing & fitting fixing CI gland of approved quality.For LI. |
| 11 | Providing & fitting fixing Gland Nuts / stagnut 100 mm long for gland of approved quality.For LI |
| 12 | Providing and fitting fixing Lantern ring for pump of approved quality. |
| 13 | Repairing of OSCO starter in/cl. Supplying & fixing of necessary spare parts as per direction of the Engineer-in-charge.A) Stand finger,Gola finger |
| 14 | CT coil |
| 15 | Magnet coil |
| 16 | Circuit board for OSCO starter of Bakelite make |
| 17 | Repairing of pump shaft by welding, polishing etc. complete as per the direction of Engineer-in-charge. |
| 18 | Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump. |
| 19 | Supplying and fitting fixing manually operated oil immerged starter of approved quality.30 HP OSCO/BCH Make. |
| 20 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling.A) 6305 Ball bearing (TATA/SKF) |
| 21 | b) 6306 Ball bearing (TATA /SKF) |
| 22 | Supply & fitting fixing ball bearing of approved quality (TATA/SKF MAKE) for pump.a) 6308 Ball bearing (TATA /SKF) |
| 23 | b) 6309 Ball bearing (TATA/SKF). |
| 24 | c) 6310 Ball bearing (TATA /SKF) |
| 25 | Supplying and fitting fixing of GI bend of approvd quality.a) 125 mm dia |
| 26 | b) 150 mm dia |
| 27 | Supplying and fitting fixing of spare parts for 20/25 HP Horizontal motor.Motor fan |
| 28 | Providing & fitting fixing of Amp-meter, voltmeter selector switch of approved quality. |
| 29 | Providing and fitting fixing MS flange (10 mm thick) at site of work of approved quality.a) 150 mm dia |
| 30 | b) 125 mm dia. |
| 31 | Providing and fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.a) 150 mm dia |
| 32 | b) 125 mm dia. |
| 33 | Providing and fitting fixing MS hose clamp with nuts and bolts etc. complete at site of work of approved quality.a) 150 mm dia. |
| 34 | Providing and fitting fixing PVC suction hose pipe overall thickness 5 mm of best quality at site of work (Pankaj made) of approved quality.a) 150 mm dia |
| 35 | Providing and fitting fixing CI non-return valve of approved quality as per CPWD specification and direction of the Engineer-in-charge.a) 150 mm dia |
| 36 | Providing and fitting fixing CI tail piece of approved quality at site of work.a) 150 mm dia |
| 37 | Labour charges for flange welding with GI pipe by electric plant. |
| 38 | Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality.a) 150 mm dia |
| 39 | Providing and fitting fixing CI foot valve spare parts of 125/150 mm dia at site of work of appoved quality.A) CI foot valve weight. |
| 40 | b) CI foot valve ring |
| 41 | c) CI foot valve net |
| 42 | Dismantalling of old pump/motor from base & stacking of materials & return the same to the Sub-Divisional store as per direction of Engineer-in-charge. |
| 43 | Dismantaling of horizontal pump and motor of 20/25 HP from the base and carrying the pump set to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of the Engineerin-charge. |
| 44 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of theEngineer-in-Charge.125/150 mm dia |
| 45 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm dia |
| 46 | Providing and fixing GI pipes of heavy class as per IS 1239 with latest amendment complete with GI fittings i/c trenching refilling cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Enguineer-in-charge. (external work)i) 125 mm dia nominal bore. |
| 47 | ii) 150 mm dia nominal bore. |
| 48 | iii) 40 mm dia nominal bore |
| 49 | iv) 50 mm dia nominal bore |
| 50 | Supplying and filling of transformer oil in the oil tank of manually operated oil immerged starter of approved quality. |
| 51 | Dismantalling of motor for varnishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch/starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge. |
| 52 | Providing and fixing GI plug of approved quality.125/150 mm dia. |
| 53 | Supplying and fitting fixing of spare parts for 20/25 HP Horizontal motor.Terminal plate. |
| 54 | Providing & fitting fixing of brass full way valve with handle in the G.I. pipeline in/c cuting, threading etc., complete as per CPWD specification & direction of the Engineer-in-charge. (40mm) |
| 55 | (50 mm) |
| 56 | Dismantaling of suction pipe from deposited silt or clay by mechanically or by manually as per direction of the Engineer-in-charge. |
| 57 | Supplying and fitting fixing of rubber flange washer 6mm thick of approved quality as per the direction of the Engineer-in-charge.A) 125 mm dia |
| 58 | Providing and fixing 200 amps bush bar of sizwe 600x450x100 mm with 4 nos. copper strip of size 450x40x4 mm of approved quality. |
| 59 | Supplying & fitting fixing of 7/16 Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality. |
| 60 | Supplying and fitting fixing of selector switch on the panel board of approved quality. |
| 61 | Supplying and fitting fixing of Indicator bulb (Flush type containing 3 nos batton holder with bulb) on the panel board of approved quality. |
| 62 | Supplying & fitting fixing kit cut for main & sub-main switch (Male & Female) as per direction of the Engineer-in-charge.A) 63 Amps main switch |
| 63 | B) 100 Amps main switch |
| 64 | C) 200 Amps main switch |
| 65 | Providing and fitting fixing of foot valve washer 200 mm dia of best quality as per the direction of Engineer-in-charge. |
| 66 | Repairing of 63 Amps Main switch providing all Kit-Kat & kit kat base & repair where necessary fitting fixing & testing in/cl. Supplying necessary kit-cuts. |
| 67 | Supplying & greasing/applying of grease of approved quality as per the direction of Engineer-in-charge. |
| 68 | Supplying and fitting fixing of asbestos rope of best quality as per direction of Engineer-in-charge.10 to 12 mm thick. |
| 69 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.size 1.80 x 1.20 x 0.025 mtr |
| 70 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender