Tender For Tender For Repair And Replacement Of 11 Kv Ht Line At Various Locations In Section Sach And Shour Esd Sach Pved Killar Op Circle Hpsebl Dalhousie.
Tender Value
9.92 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
9924
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Repair And Replacement Of 11 Kv Ht Line At Various Locations In Section Sach And Shour Esd Sach Pved Killar Op Circle Hpsebl Dalhousie.
BOQ
| Sl. No. | Item Description |
| 1 | Supply Part-Tender for R/R of 11kV HT Line from 2x450 KW MHEP sach to village parmar Bhatori damaged due to heavy snowfall and landslides in (E) Section sach under Electrical Sub-Division HPSEBL sach. |
| 2 | ACSR conductor 6/1/3.35mm (Rabbit) |
| 3 | Steel Tubular Pole 9 Mtr Long |
| 4 | RCC Muff with Concrete Filling |
| 5 | Cross Arm [ Channel Iron (100×50×6mm],Length: 1270mm i/c tolerance of 100 mm either side)× 2 structure |
| 6 | Angle Iron (50×50×6mm), Length: 750mm×2 No×2 structures |
| 7 | Pole Top Bracket [MSCI:100*×50*×6mm-100mm |
| 8 | 11kV Pin Insulators (Porcelain,12kV,10KN):3 No per pole structure |
| 9 | Belt set -MS Angle Iron :50×50×6 Length:1800mm×2 No |
| 10 | X-Bracing Set -MS Angle Iron 50×50×6, length:2125mm×2No |
| 11 | X-Arm (Horizontal)-MS Channel Iron C type: 100×50×6 Length:2340mm×2 No] |
| 12 | Discs insulator sets on Dead End structures complete in all respect |
| 13 | Stay set complete in all respect |
| 14 | Stay wire (7/3.15mm) (10.0kg per stay set) |
| 15 | Half clamps: |
| 16 | Full clamps: |
| 17 | Danger Plate (250×200×1.6mm) |
| 18 | Nuts and Bolts of various sizes |
| 19 | Red Oxide paint |
| 20 | Aluminium Paint |
| 21 | Removal of old conductor from insulator & De-Stringing (420 + 5110) = 5530 |
| 22 | Erection of tilted S/T pole 9 mtr. Long |
| 23 | Re-sagging, stringing & binding insulator of conductor size (50 mm) (10011 + 638) = 10649 |
| 24 | Erection Part-Tender for R/R of 11kV HT Line from 2x450 KW MHEP sach to village parmar Bhatori damaged due to heavy snowfall and landslides in (E) Section sach under Electrical Sub-Division HPSEBL sach. |
| 25 | ACSR conductor 6/1/3.35mm (Rabbit) |
| 26 | Steel Tubular Pole 9 Mtr Long |
| 27 | RCC Muff with Concrete Filling |
| 28 | Cross Arm [ Channel Iron (100×50×6mm],Length: 1270mm i/c tolerance of 100 mm either side)× 2 structure |
| 29 | Angle Iron (50×50×6mm), Length: 750mm×2 No×2 structures |
| 30 | Pole Top Bracket [MSCI:100*×50*×6mm-100mm |
| 31 | 11kV Pin Insulators (Porcelain,12kV,10KN):3 No per pole structure |
| 32 | Belt set -MS Angle Iron :50×50×6 Length:1800mm×2 No |
| 33 | X-Bracing Set -MS Angle Iron 50×50×6, length:2125mm×2No |
| 34 | X-Arm (Horizontal)-MS Channel Iron C type: 100×50×6 Length:2340mm×2 No] |
| 35 | Discs insulator sets on Dead End structures complete in all respect |
| 36 | Stay set complete in all respect |
| 37 | Stay wire (7/3.15mm) (10.0kg per stay set) |
| 38 | Half clamps: |
| 39 | Full clamps: |
| 40 | Danger Plate (250×200×1.6mm) |
| 41 | Nuts and Bolts of various sizes |
| 42 | Red Oxide paint |
| 43 | Aluminium Paint |
| 44 | Removal of old conductor from insulator & De-Stringing (420 + 5110) = 5530 |
| 45 | Erection of tilted S/T pole 9 mtr. Long |
| 46 | Re-sagging, stringing & binding insulator of conductor size (50 mm) (10011 + 638) = 10649 |
| 47 | Supply Part-Tender for R/R of 11kV HT Line from Shour to Purthi damaged due to heavy snowfall and landslides in (E) Section Shour under Electrical Sub-Division HPSEBL Sach. |
| 48 | ACSR conductor 6/1/3.35mm (Rabbit) |
| 49 | Steel Tubular Pole 9 Mtr Long |
| 50 | RCC Muff with Concrete Filling |
| 51 | Cross Arm [ Channel Iron (100×50×6mm],Length: 1270mm i/c tolerance of 100 mm either side)× 2 structure |
| 52 | Angle Iron (50×50×6mm), Length: 750mm×2 No×2 structures |
| 53 | Pole Top Bracket [MSCI:100*×50*×6mm-100mm |
| 54 | 11kV Pin Insulators (Porcelain,12kV,10KN):3 No per pole structure |
| 55 | Belt set -MS Angle Iron :50×50×6 Length:1800mm×2 No |
| 56 | X-Bracing Set -MS Angle Iron 50×50×6, length:2125mm×2No |
| 57 | X-Arm (Horizontal)-MS Channel Iron C type: 100×50×6 Length:2340mm×2 No] |
| 58 | Discs insulator sets on Dead End structures complete in all respect |
| 59 | Stay set complete in all respect |
| 60 | Stay wire (7/3.15mm) (10.0kg per stay set) |
| 61 | Half clamps: |
| 62 | Full clamps: |
| 63 | Danger Plate (250×200×1.6mm) |
| 64 | Nuts and Bolts of various sizes |
| 65 | Red Oxide paint |
| 66 | Aluminium Paint |
| 67 | Removal of old conductor from insulator & De-Stringing (420 + 5110) = 5530 |
| 68 | Erection of tilted S/T pole 9 mtr. Long |
| 69 | Re-sagging, stringing & binding insulator of conductor size (50 mm) (10011 + 638) = 10649 |
| 70 | Errection Part-Tender for R/R of 11kV HT Line from Shour to Purthi damaged due to heavy snowfall and landslides in (E) Section Shour under Electrical Sub-Division HPSEBL Sach. |
| 71 | ACSR conductor 6/1/3.35mm (Rabbit) |
| 72 | Steel Tubular Pole 9 Mtr Long |
| 73 | RCC Muff with Concrete Filling |
| 74 | Cross Arm [ Channel Iron (100×50×6mm],Length: 1270mm i/c tolerance of 100 mm either side)× 2 structure |
| 75 | Angle Iron (50×50×6mm), Length: 750mm×2 No×2 structures |
| 76 | Pole Top Bracket [MSCI:100*×50*×6mm-100mm |
| 77 | 11kV Pin Insulators (Porcelain,12kV,10KN):3 No per pole structure |
| 78 | Belt set -MS Angle Iron :50×50×6 Length:1800mm×2 No |
| 79 | X-Bracing Set -MS Angle Iron 50×50×6, length:2125mm×2No |
| 80 | X-Arm (Horizontal)-MS Channel Iron C type: 100×50×6 Length:2340mm×2 No] |
| 81 | Discs insulator sets on Dead End structures complete in all respect |
| 82 | Stay set complete in all respect |
| 83 | Stay wire (7/3.15mm) (10.0kg per stay set) |
| 84 | Half clamps: |
| 85 | Full clamps: |
| 86 | Danger Plate (250×200×1.6mm) |
| 87 | Nuts and Bolts of various sizes |
| 88 | Red Oxide paint |
| 89 | Aluminium Paint |
| 90 | Removal of old conductor from insulator & De-Stringing (420 + 5110) = 5530 |
| 91 | Erection of tilted S/T pole 9 mtr. Long |
| 92 | Re-sagging, stringing & binding insulator of conductor size (50 mm) (10011 + 638) = 10649 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender