Tender For Providing And Fixing 06 Nos. Portable Toilets As Separate Toilet Facilities At Op Points For Mahila Praharis In Aor Of 89 Bn Bsf Under Shq Bsf Dhubri.
Tender Value
15.38 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
30771
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhubri → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing 06 Nos. Portable Toilets As Separate Toilet Facilities At Op Points For Mahila Praharis In Aor Of 89 Bn Bsf Under Shq Bsf Dhubri.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6(1 cement :6 coarse sand) |
| 5 | 12 mm cement plaster of mix:1:6(1 cement: 6 fine sand) |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes |
| 7 | Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : Up to 6 metres depth |
| 8 | Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : Beyond 6 m and up to 12 m depth |
| 9 | Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : Beyond 12 m and up to 18 m depth |
| 10 | Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. |
| 11 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. |
| 12 | Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. |
| 13 | Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. |
| 14 | Providing and Installation of 1 HP monoblock pump and making connection with exixting handpump including electrical connections and providing the swith for operating the pump inside portable toilet etc complete as per direction of Engineer-in-charge |
| 15 | Providing electrical connection to portable toilet all complete as per direction of Engineer-in-charge |
| 16 | Providing and installation of portable Toilet having Structure dimension:- 1220mmx910mmx 2020mm , Wall Panel:- Each wall consists of 04 Nos Sandwich panels (Including of top louver panel) , All top 04 wall panel to have single skin louver panels (150mm) of 0.6mm Galvanized plain powder coated seat, each wall panel is to be 40mm thick sandwich panel made of 0.6mm thick, Min 240 MPa Yield strength(YS), Min 340 Tensile Strength Zero Spangled Skin passed Tension levelled, Restriction of Hazardous substance (ROHS) compliant, 120 GSM Galvanized plain, powder coated cold rolled sheet with insulation (38 mm EPS (Expanded Polystyrene) of density 16 kg/m3) inside it,the bottom most panel on 3 sides in each compartment to have SS 304 in the interiors Up to 125 mm from floor that is to be riveted over powder coated galvanized plain sheet. Structure Roofing– Flat roof of 40 mm thick Sandwich Panels made of 0.6 mm thick, 275 MPa Strength zero spangled skin passed 120 GSM galvanized plain powder coated cold rolled sheet with insulation (38 mm EPS (Expanded Polystyrene) of density 16 kg/m3) Inside it. The protrusion is to be 50 mm.Structure corner pillars – 40 mm thick Sandwich Panels made of 0.6 mm thick, 275 MPa Strength zero spangled skin passed 120 GSM galvanized plain powder coated cold rolled Sheet to be used for structure corner pillars. Doors –1790 mm*649mm*40 mm thickness for Gents toilet (made of 0.6 mm Galvanized plain powder coated steel) inclusive of standard accessories i.e. 2 no’s of A1 handle (6 inch), 1 L drop with Plastic bush, 1 No of A1 Tower bolt (6 Inch) and SS hinges and screws in each toilet. External/Internal finish–Pure Polyester Glossy Powder Coating with single seated indian type WC of size 580x440mm with 10 litre low level flushing cistern and P-trap, with provision of CP brass bib cock, health faucet/push cock, anti-skid tile flooring and SS washbasin (304 grade) of size 450x300mm with CP pillar tap with the cabin. water facility by means of 200 ltr over head tank with tank frame and sewerage facility by means of 1000 ltrs HDPE septic tank with 75 mm outlet facility will be provided. Powder coated steel ventilation above the door made of 0.6mm thick, 275 MPa strength zero spangled Galvanized plain sheet and lighting arrangement 01 LED & 01 Modular switch will be provided complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender