Tender For Construction Of Municipal Building At Chhatarpur Under Chhatarpur Nagar Panchayat
Tender Value
13.68 Crore
Estimated cost
Bid Submission
28 Jul 2026
14 days left
EMD
13.68 Lakhs
Bank guarantee accepted
Document Fee
25000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palamu → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Municipal Building At Chhatarpur Under Chhatarpur Nagar Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Felling trees of the girth (measured at a height of 1 m above groundlevel), including cutting of trunks and branches, removing the roots andstacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth |
| 3 | Felling trees of the girth (measured at a height of 1 m above groundlevel), including cutting of trunks and branches, removing the roots andstacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth |
| 4 | Earth Work in excavation in Foundation Trenches in Ordinary soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I |
| 5 | Extra for earth work in hard soil as per specification & direction of engineer in charge (Vide classification of soil item B) |
| 6 | Providing designation 75A work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 7 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock |
| 8 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 9 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 10 | Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge |
| 11 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.With Chlorpyriphos EC 20% with 1% concentration |
| 12 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 13 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 14 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 15 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 19 | Providing and laying in position cement concete of soecified grade excluding the cost of centering and shuttering - All work up tp plinth level 1:4:8 (1 cement :4 coarse sand (Zone -III) :8 graded stone aggregrate 40 mm normial size) |
| 20 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 22 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix including pumping of concrete to site of layinh but excluding the cost of centering ,shuttering finishing and reinforcement including admixtures in recommended proportions as per IS : 9103 to accelerate rated srtting of concrete, improve workability without impaiting strenth and durability as per direction of engineer in charge (note :- Cement content considered in this item is 330 kg/cum excess/ less cement used as per design mix is payable/ recoverable seperataly ).All works upto plinth level |
| 23 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix including pumping of concrete to site of layinh but excluding the cost of centering ,shuttering finishing and reinforcement including admixtures in recommended proportions as per IS : 9103 to accelerate rated srtting of concrete, improve workability without impaiting strenth and durability as per direction of engineer in charge (note :- Cement content considered in this item is 330 kg/cum excess/ less cement used as per design mix is payable/ recoverable seperataly ). All works above plinth level upto floor V level |
| 24 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 25 | Providing Tor steel reinforcement of 8mm. dia rods as per approved design and drawing -do- -do- TMT Fe 500 (Only valid for sAlL & TATA Steel |
| 26 | Providing Tor steel reinforcement of 10mm.,28mm, 32mm Dia. bars as per approved design and drawing -do- -do |
| 27 | Providing Tor steel reinforcement of 12mm.,16 mm,20mm and 25 mm Dia. bars as per approved design and drawing -do- -do |
| 28 | Centering and shutteing including struting, propping etc and removal of form for Foundations, footings, bases for columns, etc for mass concrete |
| 29 | Suspended floors, roof , landings , balconies and access platform |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) |
| 31 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 32 | Columns, Pillars, Piers, abutments, Posts and struts |
| 33 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases |
| 34 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) |
| 35 | providing designation 75 B brickwork in C M ('1 :6 ) in foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of E/l. |
| 36 | Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9\\"x4.5\\"x3\\") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 37 | Providing designation 112 mm thick reinforced designation 100 A brick work vuith fly ash lirne brick (FLAG)confirming to lS 12894-1990 (9\\"x4'5\\"x3\\" ) in C.M. ( 1 . 4 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials,n caffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specificationand direction of E/|. |
| 38 | Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary |
| 39 | Supplying, fiiting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors windows skylights fanlights and C/W celetial window opening including wedge over all clamps complete including application of two coats of wood preservative of approved quility onthe surface buttling walls and lintels all complete as per building specification anddirection of E/I. |
| 40 | Supplying fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutter door and windows with black board core blended with high quality phenol formal clehydes synihetic resin both side commercial veneered of standard make with Aluminium fittings :such as hinges, tower bolts, hendle, cleats and sand blocks and laxes all conrplete as pe building specrfication and direction of E/l. |
| 41 | Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 42 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.9.127.2 1.0 mm thick 1.00mm thick |
| 43 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : |
| 44 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 45 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 46 | Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor fastners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be finished with an approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded). |
| 47 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (paneling to be paid for separately). |
| 48 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. |
| 49 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per anufacturer’s specification and direction of Engineerin- charge 9.117.1 Extruded section profile size 48x40 mm D4 (2100X750) |
| 50 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge D4 (2100X750) |
| 51 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 52 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).12 mm thick frameless toughened glass door |
| 53 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 54 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately |
| 55 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 56 | Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces including cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses.0.71 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm. |
| 57 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 58 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid .in basic item):With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) |
| 59 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 60 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 61 | Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabrlcated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/1 |
| 62 | providing and laying, Doublecharge vitrified floor tiles in different sizes (thickness to be specified by lhe manufacturer) with water absorption less than 0.08% and conforming to lS 15622/ISO 13009 of approved make in all cotours and shades, laid on 20mm thick cement mortar 1 4 (1 cement:4 coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600x600 mm |
| 63 | Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring, kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 SQM |
| 64 | Providing edge moulding to 18 mm thick marble/granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 65 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 66 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.10 % skirting area |
| 67 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete. |
| 68 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 69 | Granite stone 18 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 70 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/SQM including pointing in white cement complete. Granite of any colour and shade |
| 71 | Providing and laying 25mm. thick kotah stone slab flooring of approved size, texture and colour over 19mm. thick base of lime morter (1:1:1) (lime putty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specificationand direction of E/I.{iv} 600x600 mm size |
| 72 | Providing 50mm thick cement concrete flooring (1:2:4 with 20mm to 6mm size grade stone chips finish with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes & royality with all complete as building specification and direction of E/I |
| 73 | Providing and laying 8mm thick wooden laminated flooring of Krono / Kronotex-Germany/Pergo or equivalent make of 8.0mm thick,AC-4,laid over underlay of polyurethane sheet and foam complete with nosing and all accessories etc,with 4 inch skirting all around all complete as per direction of Engineer-in-charge. i/c 1 ) Flooring, 2) Skirting, 3) A.profile Foam, 4) polythenes etc. Freight & cartage (Base Rate 1290/SQM) |
| 74 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase |
| 75 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 76 | Water proofrng for Old and New Roof Slab :- Providing and laying waterprooflng treatment on roof slab by applying two Component, factory a designed ready to use, acrylic modified flexible,material applied with brush, roller or spray for wate proof i n g coating as per manufactlrer specificatio With following steps :- (a)surface preparation :-Provrding and cleaning of concrete surface to remove dLrst, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from sofftt to identify seepage, leakage. On identiiication of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc or equrivallent. Providing and reparing of all corners and joinis such as those betr,veen the parapet wall and the roof slab etc shall be chamfered with '150mm X '150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent Before chamfering a prime coat shall be given with the sl u rry ?!gc!ylic polyrner Repai rin g su rface irreg ularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modilied repair moriar ir;cluding a coat of bonding agent of the same with ceme nt slurry rncluding all rnaterial, labour, tools complete.(b)1st Coat :- Apply 1st coat of two component acrylic modified, ready to use, llexrble cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application ,45 gsm oI Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/SqmUcoat For the fJUrpose of n'ieasurernent tite entire treated surface will be measured.\\" .(c) :2nd Cr:ai :-T,: apply the 2nd coat of two component acrylic modified, reatiy to-use, flexible cementttious material right angle to the '1st coat over the glass fibre liad surface. 2nd coat should be applied @0.7 kgl Sqrnt/coat. For the pltrpose of measurement the entire treated surface will be rneasurecl.\\" Alte r three days of drying the 2nd coat, therainwater ouilets to be plugged and ponding test to be done for 48 hours to rrjerrtify se epage, leal |
| 77 | Covering of treated surface wrth PCC :- Providing 50mm thick Cementn Concrete M20(1:'1.5:3) r'naintaining slope in alternate 2 mIx 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and clcaned sand of F M 2 5 io 3 including screening,shuttering,and mixing cerite nt c0ncrete in mixer with admixture of integral water proofing and placing rn position,strikirrg cLrring,t-a]glgnd royality all complete as per buildirrg specifictionJand direction of E/l.Panels that has been left should be casteci nextday.-lhere should be 6 mm gap between Panels.Brand- Sika *Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421ic , Dr Frx,t Prdiproof LWr |
| 78 | Providing and mixing Liquid lntergral water proofing compound in Conctrete or plaster as per rnanufacturer specificatioqand as per cjirection of Eng - in Charge Brand- Sika Plastocrate plus, MYK proof WP 1 0, Fosroc-Cc.rnplast X4211 C, Dr fixit Pidiproof LW+ or Equivalent |
| 79 | Providing and filling of 6 mm groove between 50mm PCC panels with 6 mm thick deep thermocol strip and filling the rest 25mm with polysulphide sealant (poring grade)as per drawing and technical specification and direction of E in charge (with 18 % GST ). Brand:- sika - polysulshide,fosroc- thioflex 600, dr fixit pidi seal PS (42P) ,MYK seal PS or euivalent. |
| 80 | Toilet/Kitchen Water proofing: 1) Surface preparation by grinding machine, cleaning , crack filling etc. completeProviding and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
| 81 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) |
| 82 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 83 | Providing & Fixing laminated wooden false ceiling , made in 50x50mm Hard wood frame (Mirandi) centre to centre 600mm both ways, hang to ceiling with help of hanger support 'L' type G.I angle (25x25mm) and anchor bolt etc. over fixed 11mm thick MDF board with 10x8mm deep groove finish with lacquer polish, 1.0 mm thick approved shade laminate to fixed on MDF board, defects free bubbles free with help of adhesive. as per drawing and to the entire satisfaction of Engineer in charge. ( MDF Board & Laminate Make Green ply/Century /Merino or Equivalent ,Adhesive make Pidilite or equivalent) |
| 84 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building direction of E/I. |
| 85 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 86 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 87 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 88 | Providing 1.5mm cement punning including curing carriage of water with all leads and lifts as per building specification and direction of E/I. |
| 89 | Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l. |
| 90 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 19.6.2-150 mm dia |
| 91 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 92 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm) |
| 93 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade -New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 94 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 95 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)+Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 96 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 10 mm depth and 10 mm width |
| 97 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge100 mm nominal size dia |
| 98 | Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge |
| 99 | Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge |
| 100 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge |
| 101 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. |
| 102 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent biMTR.allic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the periMTR.er for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having .all the performance characteristics etc. all omplete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in SQM. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 SQM from the certified laboratories accreditated by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories.1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing MTR.hod for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331- 09 testing MTR.hod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing MTR.hod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME- 330-10 testing MTR.hod for a range upto 50 mm”.5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing MTR.hod for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml” |
| 103 | Providing and fixing SGU 6mm Toughned glass in aluminium/uPVc windows, ventilators and partition etc. including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.The Properties of glass should be as : Solar heat gain Cofficiant (HSGC) =0.50 and Visual Light Transmission (VLT) =50% or more and shade to be approved by EIC/Architect. |
| 104 | Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directedby the Engineer- in-Charge. |
| 105 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face# 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 TS / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP claddingis payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 106 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 107 | Providing and fixing of 13 Passenger Lift/ 884Kgs / 1.25 Speed / 5 Floors / 5 Stops / Stainless Steel skretch proof with cast iron counter weight and T section guide rail for car and counter with lift licence.Car Cabin approved design and make |
| 108 | Providing and fixing of Glass Fiber Reinforced Concrete (GFRC) Cornice in approved size, pattern, Design, thickness and color. The Cornice should be made From 53 grade white Portland cement/ 43 grade OPC or PPC gray cement manufactured by J.K. Cement or equivalent having minimum compressive Strength of 40N/mSQM, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by Sant Gobain, Owens corning or equivalent, super plasticizers and polymers manufactured by BASF, Sika, MYK Schomburg or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent. The Fixing of Column should be Dry Fixing i.e. to be done with Stainless Steel (SS-304)/ MS Frames, dash fasteners, Self-screw and pins. GFRC Cornice (30mm thick) as per your designNote:- Rate to be paid after approval of drawings/design & quotations |
| 109 | Supply & Installation of FLUX polycarbonate multi-layered, multicell connectible modular panel system, a complete assembly of co-extruded UV plus polycarbonate panels along with all standard fixing accessories. The polycarbonate panel shall be thick with 900mm (Max) width. The panels shall be uniform in color with an integral core. In a cross section, the core shall be constructed of six walls, five cells with vertical separator in between like truss bracing structure to provide better strength to the panel. Panels with bigger width more than 900 mm will not be preferred to counter higher wind load and meet design wind load of the project. The polycarbonate panels with interlocking connectible connectors running lengthwise at both sides of the panel shall be with double tooth locking and anti-pop, deep groove to counteract shear wind forces. The whole system shall be secured using SS Trapezoidal fasteners having minimum three points for fastening with self-drilling Screws to have proper fixing with the structural framework (Paid separately). The Trapezoidal SS fasteners shall have a base coverage of minimum 40mm and top holding of 80mm across length on polycarbonate panel to ensure a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. Panels shall be solo translucent with angular daylighting concept one color throughout the panel for better insulation and improved shading coefficient for Indian tropical weather conditions. |
| 110 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied withspecial grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in requiredproportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 111 | Providing core cutting in reinforced cement concrete (RCC) using diamond-tipped core drill machine to required diameter and depth for pipes, cables, or ducts, including disposal of debris and cleaning the site.100mm dia |
| 112 | Providing core cutting in reinforced cement concrete (RCC) using diamond-tipped core drill machine to required diameter and depth for pipes, cables, or ducts, including disposal of debris and cleaning the site. 150mm dia |
| 113 | DT : Basic rates for 125/115mm dia drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of E/I.. (Basic Rates) Drilling upto 30 mtr. Depth below G.L. in Rural Area |
| 114 | Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres.Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m |
| 115 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 116 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.) For Grading -II Material |
| 117 | Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing |
| 118 | Cement Concrete Pavement Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in abatching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing |
| 119 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease andforeign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 120 | Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. |
| 121 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge.80mm thick Cement concrete paver block of M-30 gradewith approved colour, design & pattern. |
| 122 | CARRAIGE OF MATERIALS |
| 123 | SAND (UPTO 10KM LEAD) |
| 124 | CHIPS (UPTO 22KM LEAD) |
| 125 | METAL ( 22KM ) |
| 126 | BRICKS (UPTO 8KM LEAD) |
| 127 | ELECTRICAL |
| 128 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. |
| 129 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 130 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required. |
| 131 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 132 | Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required |
| 133 | 2x2.5 sq mm + 1x2.5 sq mm earth wire |
| 134 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. |
| 135 | 2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 136 | 4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 137 | 4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 138 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections painting etc. as required. (For light plugs to be used in non residential buildings). |
| 139 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections painting etc. as required. (For light plugs to be used in non residential buildings). |
| 140 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 141 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 142 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 143 | Supplying and fixing Ding dong sound call bell single phase, 230 volts, complete as required. |
| 144 | Suppling & Fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required Bell push |
| 145 | Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA \\"C\\" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required. |
| 146 | 6/32 amps, Single pole |
| 147 | 40 amps DP |
| 148 | 50/63 amps, TPN |
| 149 | Supplying and fixing Single pole blanking plate in the existing MCB DB complete etc. as required. |
| 150 | Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 151 | 6 Way (4 + 18), Double Door Horizontal Type |
| 152 | 8 Way (4 + 24), Double Door Horizontal Type |
| 153 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way , Double door |
| 154 | Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required.40 Amps |
| 155 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required.63 Amps |
| 156 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as Required.40 Amps |
| 157 | Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as Required.1 or 2 Module (78mm x 78mm x 45mm) |
| 158 | Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required. |
| 159 | Telephone Socket outlet. |
| 160 | TV Antenna socket outlet. |
| 161 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm. |
| 162 | Supplying and drawing following pair 0.5 mm dia FR PVC insulated copper conductor, Unarmored Telephone cable in the existing surface/recessed steel/ PVC conduit as required.2 Pair |
| 163 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 164 | Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required. 1 run of cable |
| 165 | Supplying & Fixing Modular Type Computer jack RJ 45 ISI mark 1 Module on existing Mounting plate and box Complete with all accessories as required. |
| 166 | SITC of following rating recess / surface mounted LED round / square shape down light luminarie with pressure die cast housing for single phase supply voltage Luminarie shall be confirm to IS: 10322 part -5 / section -2 or IEC :62722 withh all neccesary accessories as required. |
| 167 | 12W LED Round Down Light |
| 168 | 15 / 16 W LED Round Down Light |
| 169 | 18 /20 W LED Round Down Light |
| 170 | Bulk Head fitting with 9/10Watt LED. |
| 171 | Supply of LED Mirror Light with power 8/10W rated voltage 230V 50 Hz aluminium/ PC body with rauuning life minimum 30000 Hours |
| 172 | S.I.T.C of following rating surface mounted LED Tube Lighting Fitting Suitable for 230V 50 Hz, Single Phase Supply etc. complete as required.20/22 W LED Tube Light |
| 173 | SITC LED Batten light (System lumen efficacy ≥105 <120 lm/Watt)40 watt |
| 174 | 22 watt |
| 175 | 36 watt |
| 176 | Supply insttalation , testing and commisioning of following size ceiling fan 3 balde confirming to IS : 374:2019 incuding wiring thedown roads of standed lenth ( upto 30 cm ) with 1.5 sqmm PR PVC, insulated copper wire suitable for 230V 50Hz single phase supply etc. compleyte as required. |
| 177 | Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required. |
| 178 | Installation, testing and commissioning of ceiling fans/bracket fan of all sizes including wiring the down rod .of standard length (up to 30 cm ) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. |
| 179 | SITC of 300 mm (12\\") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required |
| 180 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing |
| 181 | 11KV SINGLE PANEL BOARD.11KV SINGLE PANEL HT VCB (INDOOR)- ONE INCOMER CUM OUTGOING IN IP-4X ENCLOSURE.Design, Manufacture and Supply of 1 Panel, 11 kV HT VCB Switch Board with Following Accessories :800A, 11kV, 350MVA for 3 Sec., TP, Horizontally isolated, horizontally drawout type, motorised spring charged, closing mechanism, motor voltage 230V AC, shunt tripping & Closing coil Voltage 24V DC, Electrically Operated, Trip Free, Dust & Vermin Proof, Vacuum Circuit Breaker(VCB) With Mechanical & Electrical OFF/ON Indicators & Provided with Following - 1 No.CT chamber with double wound single phase, cast resin CT, 15VA burden with core-1 for metering (CL-1) and core-2 for protection (CL-5P10) and of 100/5/5A ratio - 3 Nos.IDMT relay with 3 .Anti Pum.Master Trip Relay - 1 Setping Relay - 1 Setelements for over current (50-200%) and 1 element for earth fault protection(10-40%). - 1 Set.Trip circuit supervision relay - 1 Set.Potential Transformers, 3 Phase, 3 Limb, Drawout Type, Resin Cast 11000/(Root 3)/110/(Root 3) Ratio Class 1 Accuracy, 100 VA Burden, with HV fuse on primary side and MCB / MPCB on secondary side. - 1 Set.6 Windows Annunciator with Hooter - 1 Set.1 Window for over current trip - 1 Set.1 Window for earth fault trip - 1 Set.1 W.vindow for master trip relay - 1 Set.1 Window for Emergency Stop Push Button - 1 Set.2 Windows Spare - 1 Set.Digital Ammeter with inbuilt selector switch - 1 Set.Digital Voltmeter with inbuilt selector switch - 1 Set.A set of breaker ON/OFF/Trip/DC control supply healthy/Trip circuit healthy/ Spring Charged VCB in test / VCB in service & R,Y,B phase indication lamps. - 1 Set.Emergency stop push button - 1 Set.Limit switches with 4 NO/ 4 NC breaker auxiliary contacts - 1 Set.Control:- T-N-C (Trip, Neutral, Close) breaker control switch with indication arrangement. - 1 Set.All control wiring with protection & test terminal block as required. - 1 Set.Strip heater with thermostat for moisture absorption. - 1 Set.Suitable for connection to 3C x 240 sq.mm. Cross linked polythelene(XLPE) 11kV cables or as called for. - 1 Set.Cable box for 3C x 240 sq.mm 11kV XLPE Al. conductor cable. - 1 Set.HT Danger Plate - 1 Set .Incoming as described above. 1 Sets .Powerpack as Required to Be Included (220V/24V DC), 7AH Battery for Each Breaker Module.SINGLE PANEL 11KV HT VCB PANEL AS DESCRIBED ABOVE |
| 182 | MAIN LT PANEL.NOTE:- MCCB's Wherever Specified shall have Rotary Handle.Suppy , installation, testing, Design, manufacture, supply inspection, handling, assembling, affectingBUS BAR proper connections, testing and commissioning of 2mm CRCA sheet steel fabricated cubical type Main L.T. Panel floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52, with proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel Should Be Internal Arc tested at 50ka for .3 sec as per IEC61641. (Under no case temperature of main LT panel shall be more at any point of the panel. To avoid heating necessary exhaust fans shall have to be provided along with top louvers).Degree of protection IP-42.The internal control wiring shall fuse less. All control wiring and metering protection shall be by MCB's.Colour: Siemens Gray Powder Coated or as per approved shade.INCOMER FROM 250 KVA OUTDOOR TRANSFORMER - 1 Nos each having following.1 Nos. 400 amps Four Pole MCCB fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated Position Indicator and Frame Earthing Contact ,Confiming to IS 13947-2 1993 as Amended upto Date Complete with Following Accessories.1 set of 3 CT's of ratio 400/5A, Class 1.0 accuracy 15 VA burden for APFCR.Independent manual spring closing mechanism - 1 No.Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection - 1Set .Multifunction meter with selector switch with suitable CT's and back up MCBs. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate CT's shall be provided for protective and measuring system and for APFCR of capacitor bank with suitable VA. 3Nos. Phase indicating LED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required.Shunt trip coil 220 Volt AC.INCOMER FROM DG SET (62.5 KVA) - 1 Nos each having following.1 Nos. 125 amps four pole MCCB of fault breaking capacity 50 KA (Ics=Icu) fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicator and frame earthing contact ,confiming to IS 13947-2 1993 as amended upto date complete with following Accessories.1 set of 3 CT's of ratio 125/5A, Class 1.0 Independent manual spring closing mechanism - 1 No.Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection - 1Set .Multifunction meter with selector switch with suitable CT's and back up MCBs. Protection releases with LSIG and Over voltage ,under voltage,Reverse power protection Relay & Metering & Accessories for each D G set incomers.3 Nos. Phase indicating LED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required .Shunt trip coil 220 Volt AC. Interlocking logic electrical Interlocking between incomers and bus coupler and it should have auto start and auto trip facility for Automatic Operation of The Breakers With Manual Over Rid Facility.BUS COUPLER.400A TPN Aluminium bus bar with heat Shrink Sleeve.OUTGOING.1 Nos. 250AMPS TP+N MCCB 1 No. 250A 35KA 4P MCCB 5 No. 125A 25KA 4P MCCB 1 No. 125A 25KA 4P MCCB 1 No. 125A 25KA 4P MCCB 1 No. 250A 35KA 4P MCCB 1 No. 100A 25KA 4P MCCB 1 No. 125A 25KA 4P MCCB 1 Nos 40 AMP 4P MCB 1 Nos 63 AMP 4P MCB 1 No. 250A 35KA 4P MCCB (Spare) 2 No. 125A 25KA 4P MCCB (Spare) 1 No. 100A 25KA 4P MCCB (Spare) Other items such as 1 set of control wiring 1 Set of designation plates Complete Panel as Above FLOOR DISTRIBUTION PANELS |
| 183 | SITC of cubicle Panel suitable for 415V, 3 phase, 4 wire 50 HZ Ac supply system, fabricated in conmpartmentalized (preferbly) design from CRCA sheet of 2mm thick for frame work and covers, 3mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bar supports, , bottom base channel of MS section not less than 50mm x 50mm x 5mm thick, entire pannel shall have a common copper earth bar 25mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of AI. bus bars and control wiring with 2.5 sq.mm. FRLS PVC insulated copper conducter S/C cable, cable alleys, cable gland plates in two half. i/c providing following switch gears :-INCOMER : 100 AMP 25KA FP MCCB.BUS BAR : 125 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. digital voltmeter with selecter switch 1 no., digital Am meter with slecter switch required C/T, LED indicating lamp (RYB)- 1no. OUT GOINGS : 5 Nos 63 AMP 4P MCB Including 1 set of Indication Lamp.2 Nos 40 AMP DP MCB Including 1 set of Indication Lamp.complete panel as above and complete |
| 184 | LIFT PANEL .Design, manufacture, supply, installation, testing and commissioning of Floor Mounting Panel cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid.INCOMER : 125 AMP FP MCCB.BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm /amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 1 No 63 AMP 4P MCB Including Indication Lights (Lift 1) 1 No 63 AMP 4P MCB Including Indication Lights (Lift 2) 2 No 40 AMP DP MCB Including Indication Lights (Machine Room DB) 1 No 40 AMP DP MCB (Spare) 1 No 63 AMP 4P MCB (Spare) complete panel as above and complete |
| 185 | UPS PANEL.UPS PANELDesign, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid.INCOMER : 1 Nos 100 AMP 25KA FP MCCB (Including BY Pass Switch for 20 KVA UPS)BY PASS Switch for UPS 100 AMP FP- 1 no. BUS BAR : 125 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves.2 Nos 40 AMP DP MCB Including 1 set of Indication Lamp2 Nos 63 AMP 4P MCB Including 1 set of Indication Lampcomplete panel as above and complete |
| 186 | EXTERNAL LIGHT FEEDER PILLAR.EXTERNAL LIGHT FEEDER PILLARDesign, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. INCOMER:1 no. 125A, 25KA 4P MCCB with microprocessor based releases, ON indication, 1 no. multifunction meter (showing all power parameters), with Selector Switch, Matching Cast Resin CT's. + 3 Nos 63A DP MCB For each Phase.with 3 Nos Astronomical Weekly programmable time switch (SST- 1min) ON Phase for automaitc switching of landscape light fixtures at sun set and sun rise or twilight (auto on/ auto off and auto mode) with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site.BUS BARTPN Aluminium bus bar with heat Shrink Sleeve rated for 125A. OUTGOING12 nos 20A SPN MCB 2 nos 63A 4P MCB2 nos 40A 4P MCBOther items such as1 Set of control wiring1 Set of designation plates |
| 187 | Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I). |
| 188 | 3.5 core, 185 sq.mm. |
| 189 | 3.5 core, 120 sq.mm. |
| 190 | 3.5 core, 95 sq.mm. |
| 191 | 3.5 core, 50 sq.mm. |
| 192 | 3.5 core, 35 sq.mm. |
| 193 | 3.5 core, 25 sq.mm. |
| 194 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 195 | Upto 35 sq. mm |
| 196 | Above 35 sq. mm and upto 95 sq. mm |
| 197 | Above 95 sq. mm and upto 185 sq. mm |
| 198 | Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. |
| 199 | 3½ X 25 sq. mm (28mm) |
| 200 | 3½ X 35 sq. mm (32mm) |
| 201 | 3½ X 50 sq. mm (35mm) |
| 202 | 3½ X 95 sq. mm (45mm) |
| 203 | 3½ X 120 sq. mm (45mm) |
| 204 | 3½ X 185 sq. mm (57mm) |
| 205 | Supply, installation, testing and commissioning of following capacity (continuous loading) BEE 5 Star rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for out door/indoor applications with On Load Tap Changer (OLTC).....Complete as per dsr 2025200KVA |
| 206 | Automatic Power Factor Correction (APFC) System.Supply, Installation, testing and commissioning of Automatic Power Factor Correction (APFC) panel, indoor type floor mounted free standing totally enclosed, extendable, IP 42, of following capacity for 3 phase, 415 V + 10 %, 50 Hz AC System for Ambient temperature -5°C to +40°C, fabricated in compartmentalized designed made of CRCA sheet steel of 2.0mm thick for framework & covers, 3 mm thick for gland plate i/c cleaning & finishing complete with 9 tank process for powder coated of approved shade (RAL 7032-Siemens gray or as approved by Engineer-in-Charge).....Complete as per dsr 202575 KVAR |
| 207 | Supply, installation, Testing & Commissioning of 'Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual,Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc...Complete as per dsr 2025. 62.5 KVA |
| 208 | Supply & Testing of following 11 KV (E) grade multicore Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required.3 C x 120 Sq. mm 11 KV (E) |
| 209 | Laying of one number PILCA/PVC insulated and PVC sheathed / XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV of size not exceeding 120 sqmm direct in ground including excavation, sand cushioning protective covering and refilling the trench etc. as required. |
| 210 | Supply and making Indoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV (E) grade as required.3 C x 120 Sq.mm (11KV E) |
| 211 | Supply and making Outdoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV (E) grade as required.3 C x 120 Sq.mm (11KV E) |
| 212 | Supply and Making Straight Through Cable Jointing With Cast Resin Compund, Including Ferrule & Other Jointing Materials for Following Size of 3 core, XLPE Aluminium conductor cable of 11KV (E) grade as required.3 C x 120 Sq.mm (11KV E) |
| 213 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 214 | Earthing with Copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 215 | Providing and fixing 25 mm X 5 mm GI strip in 40mm dia GI Pipe from earth electrode including connection with GI nut bolt, spring, washer, excavation and refilling etc as required |
| 216 | Providing and fixing 25 mm X 5 mm Copper strip in 40mm dia GI Pipe from earth electrode including connection with brass nut bolt, spring, washer, excavation and refilling etc as required |
| 217 | Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required |
| 218 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 219 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 220 | Providing and fixing of lighting conductor finial made of 25 mm dia 300 mm long, GI tube having single prong at top with 85 mm dia 6mm thick G.I Base plate including hole etc. as required |
| 221 | Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Horizental Run) |
| 222 | Providing and fixing GI Tape 20mmx 3mm thick on parapet or surface of wall for lighting conductor complete as required. ( for Vertical Run) |
| 223 | Providing and fixing testing Jointing made of 20mmx 3mm thick G.I Strip 125 mm Long. With 4 nos of G.I bolts. Nuts chuck nuts and spring washers etc. as required |
| 224 | Providing and Laying G.I tape 32mm x 6mm from earth electrode directoly in ground as required. |
| 225 | UPS SYSTEM |
| 226 | SITC - Online UPS- Input supply: Three Phase, Output supply: Three Phase, The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up.20KVA (Each Power module shall be < 10 KVA) |
| 227 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement) |
| 228 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 229 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 230 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 231 | 600 mm width X 50 mm depth X 2.0 mm thickness |
| 232 | S.I.T.C of Following rating LED Post Top lamp made in die cast aluminium housing with decorative clear / opel acrylic diffuser on existing pipe including connection with 1.5sq.mm coppwr conductor etc all complete as required.20/25W LED Post top lamp clear |
| 233 | S.I.T.C of Following rating approved make LED Bollard Fitting with cylindrical shape and inverted cone shape head of height 600 to 850 mm power input -8/9 watt with die cast aluminium housing opel with PC diffuser, IP-65/54 protection, confirming to IS : 10322 part 5 etc all complete as requird. (Excluding Plinth Charge.) |
| 234 | S.I.T.C of Following rating LED Flood Lighting Luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC 50Hz. Luminarie shall be confirm to IS 10332 Part 5/section 5 and shall be complete with all necessary accessories as required. 200W LED Flood Light |
| 235 | S.I.T.C of Following rating LED Street Lighting luminare with pressure die cast housing and toughened glass cover (IP 66 protection ) in existing pole / pipe for supply voltage 100-270 AC 50Hz Luminare shall be confirm to IS :10322 part 5/ section-3 and shall be complete with all nessessary accessories as required.(Approved Make:- Havells / Philips / Crompton / Wipro).70/72W LED Street Light |
| 236 | Supplying & installation of 7 mtr. Height Octagonal Hot Dip galvanized pole (BOP. 7030) with top dia 70 mm bottom dia 130 mm & made of 3 mm thick sheet base plate dimensions 200x200x12 mm (LxBxT) including suitable size of foundation bolt all complete as required (without Arm). |
| 237 | 1M Single Arm Suitable for 70MM Top |
| 238 | Installation, Testing & Commissioning of the 7 mtr Octagonal Pole & Light Fitting with the help of suitable tools and plants, and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity og 10T/sqmtr but excluding wire and mcb |
| 239 | Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I).2 core, 6 sq.mm. |
| 240 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm |
| 241 | Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required.2 X 6 sq. mm (19mm) |
| 242 | Supplying and laying of following sizes FR PVC insulated single core copper wire in existing conduit complete as required.3x2.5 sq mm |
| 243 | RCC Hume pipes |
| 244 | Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete |
| 245 | 150 mm dia |
| 246 | 250 mm dia |
| 247 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 248 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 249 | Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 deg C to +50 deg C and Storage Temperature shall be – 5 deg C to +50 deg C, Max Attenuation ± 0.36 (db / km) at Operational Wavelength 1310 nm and ± 0.22 db / km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 µm and 125 ± 0.7 µm corrospondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cut-off wavelength < 1260 nm etc complete as required. Single Mode 6 Core Optical fiber cable |
| 250 | Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Preassembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. - 6 Port LIU |
| 251 | Supply and fixing Patch Cord of Optical Fiber Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 µm, Fiber Height + 100 nm, End-face adius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 deg C to +50 deg C, Storage Temperature – 10 deg C to +50 deg C, Length -- 2meter, Type -- LC-LC Duplex etc complete as required. |
| 252 | Supplying, drawing, Installation, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non-Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL. 1 Run of cable |
| 253 | Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to mainitain compatibility and interopertability. |
| 254 | Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6A UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable termination at rack end. |
| 255 | Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 1 ft |
| 256 | Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 3 ft |
| 257 | Supply, Installation, Testing & Commissioning of UK Style (Square) Keystone-Type Shuttered Faceplates, 1, 2 & 4 port configurations, White Color, Elegant 2 Piece (2 Plate) design for better aesthetics , Cover and Base Plastic Material ABS-UL94-V2, 86 x 86mm |
| 258 | Supply and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.6mm CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. |
| 259 | Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing Rack |
| 260 | Supplyiing, installation, testing and Commissioning of IP at its core with IP switching technology and 100% non blocking communication system with 04 Port Voicemail, 04 Port FXS, 04 Port FXO, 1 PRI Trunk lines (30 Channels) Circuit with CLIP Facility, min 100 IP users License with provision for further additions, 100 analog users, 01 Number IP based Operator Console, 45 Party Conference, Speed Dial, Music on Hold, Internal/ External ring difference, Call Barring, Call Pickup. The system should be redundant which offer 100% duplication of power supply and CPU card and to match the hybrid IP-PBX as per technical specification including supporting accessories etc complete as required. The system should have valid TEC GR approval from DoT. |
| 261 | Supplying, Installation, Testing & Commissioning of Analog phones having standard feautres like 16 digit LCD display, 2 way speaker, caller ID and number storage facility etc. complete as required. |
| 262 | Supplying, installation, Testing and commissioning of following capacity 24 port Layer 3 Network Switch having features and specifications etc. as mentioned here under: At least 20 X RJ-45 Gigabit Ethernet Ports and additional 4 combo 10/100/1000 base-t/SFP Ports with additional 4 SFP+ ports non-blocking architecture by having Switching capacity of min. 128Gbps and packet forwarding rate of 95Mpps or higher, 16K MAC table. Console Port, USB port, Internal AC Power supply with operating temperature of 0 to +50 0C. Stacking port with stacking support of minimum 8 units per stack. 48K Mac address, 9K or more Jumbo frame, ERPS with enabling ring to converge in less than 50 ms from node or link failure, Static routing, Static, 6to4, ISATAP and GRE, IPv6 Neighbor Discovery (ND), BGP, ISIS, MPLS, VRRP v2, OSPFv2/v3, PBR, Route Redistribution, RIPv1/v2/ng, IP Helper all L3 Protocols should support from day 1 for both IPv6 and IPv4, 802.1x, Port security , Radius C TACACS+ authentication C accounting, DAD, DAI, DoS attack prevention, SSH, Guest VLAN, IP Access List, MAC Access List. Multicast: VLAN, PIM-SM, PIMDM, PIM- SDM, PIM-SMv6, DVMRP v3 and MSDP, IGMP C MLD Snooping, Flow mirroring, IGMP C MLD Snooping Ǫuerier, Per-VLAN IGMP C MLD Snooping. SNMP, Dual configurations, Multiple images, RMON, LLDP/LLDP-MED, sFlow, DHCP/BOOTP Client, IPv4/IPv6, Syslog server, Debug command, 802.3ah Ethernet Link OAM, 802.1ag Connectivity Fault, Y.1731 OAM, 802.1Ǫbb Priority- based Flow Control (PFC), Dying Gasp, Cable Diagnostics , 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. |
| 263 | Supply, Installation, Testing & Commissioning of 1G SFP Single Mode |
| 264 | Supply, Installation, Testing & Commissioning of 10 G SFP + Single Mode |
| 265 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C. Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg 1 Run of cable |
| 266 | Supplying, Installation, Testing and commissioning o CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. |
| 267 | Supply, Installation, Testing & Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D |
| 268 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D Copper Patch Cords of length 1m (3ft) |
| 269 | Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D Copper Patch Cords of length 3m (10ft) |
| 270 | Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 white for I/O fixing at user side. |
| 271 | Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome Camera having following specifications and features etc :- 1)Type of Camera: Dome Camera 2) Image Sensor: 1/2.8\\" or better progressive Scan CMOS get color image even at night condition 3) Signal System: PAL/NTSC 4) Minimum Illumination: 0.008Lux@ F1.4, AGC ON, 0 lux with IR or better5MP/6MP IP IR 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) Dome Camera. |
| 272 | Supplying Installation Testing and Commissioning of 5/6 MP IP Type of Camera: Bullet Camera Image Sensor: 1/2.8\\" or better progressive Scan CMOS get color image even at night condition Signal System: PAL/NTSC Minimum Illumination:5MP/6MP IP IR 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) outdoor bullet Camera |
| 273 | Supply, installation, testing and commissioning of 64 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/36/64, 2nd screen: 1/4/8/9/16 |
| 274 | Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL certifications. 10TB (Terabytes) |
| 275 | Supply, Installation, Testing and Commissioning of Full HD 55\\" LED Professional Display Panel. |
| 276 | Supply, Installation, Testing & Commissioning of L2+ managed industrial PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem. |
| 277 | Supplying, installation, Testing and commissioning of following capacity 8 port PoE Layer 2 Industrial Grade |
| 278 | Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5\\" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. |
| 279 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS.Two Loop Panel. |
| 280 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. |
| 281 | Heat Detectors of electronic Rate of Rise cum fixed tempreature (Dual Thermistor) type with mounting base complete with all connection etc. |
| 282 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 283 | Supplying, installation, testing & commissioning of addressable fire control module complete as required. |
| 284 | Supply of approved make Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. |
| 285 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. |
| 286 | Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. |
| 287 | Supplying, installing, testing and commissioning approved make Addressable Power Supply Unit: 24V DC for Notification Appliances. The PSU shall be UL Listed, supervised by Fire Panel & of the same make as Fire Alarm System |
| 288 | Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. |
| 289 | Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. |
| 290 | PLUMBING |
| 291 | Supplying , fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I 'p' trap 15 liters C.I.pull and let go flushing cistren of names or other I.S.S. equivalent make , complete with all fitting , C.I.or C.C. brackets 32mm alkathene/P.V.C telescopic flush , pipe about 2 M long with one brass coupling and clamps GI ,chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less thane 50grms. 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coats of red oxide primer etc. all complete as per specification and direction of E/I. (c) With 10 lit. low level PVC Cistem |
| 292 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all completeas per specification and direction of E/I(b) 10 lit. low level PVC Cistem |
| 293 | (b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. |
| 294 | (i) 600mm x 450mm size |
| 295 | (c)(iii) C.P. brass liquid soap container |
| 296 | Provinding and fixing wash basin wih C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required :White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer |
| 297 | Providing and fixing white vitreous china laboratory sink with CI brackets , C.P brass chain with rubber plug 40 mm C.P brass waste and 40 mm CP brass trap with necessary C.P brass unions complete including painting of fittings and brackets , cutting and making good the wall wherever required :Size 600x450x200 mm |
| 298 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in charge. |
| 299 | Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete .32/40 mm Dia |
| 300 | Providing and fixing toilet paper holder :C.P. brass |
| 301 | .Providing and fixing PTMT Bottle Trap for Wash basin.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. |
| 302 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms |
| 303 | Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore |
| 304 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 305 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 306 | Providing and fixing CP brass single lever low flow Sink mixer with 15 mm CP brass single lever pillar cock with pop up and waste complete including cutting and making good the walls where required.ROCA make (Model -RT5A3060C00) or Equivalent. |
| 307 | Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat hook on door complete. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge. MAKE JAQUAR MODEL NO.- ACN-1161N or EQUIVALENT. |
| 308 | Providing, fixing, testing and commissioning of UPVC SWR pipe type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps etc. conforming to IS:14735-1999 and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint as required/applicable.110 mm (OD) |
| 309 | Providing, fixing, testing and commissioning of UPVC 'P' trap/floor trap/urinal trap of self cleansing design having 50 mm water seal with or without horn conforming to IS : 14735-1999 including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) including cost of cutting and making good the walls & floors wherever required.110 mm inlet x110 mm outlet. |
| 310 | Providing, fixing, testing and commissioning of UPVC inlet fittings (hopper) receive waste from fixture waste with maximum 3 inlets 40, 50 & 63 mm OD size, fabricated from 110 OD UPVC SWR pipe, UPVC sockets, fixed to UPVC traps including solvent weld joint/rubber ring joint, complete with all civil work set in cement concreate 1:2:4 as required including cost of cutting and making good the walls & floors wherever required. |
| 311 | Providing, fixing, testing and commissioning of UPVC waste Pipe conforming to IS : 4985-2000 class III including all moulding fittings conforming to IS : 7834 (Part-1 - Part -7) 1987 such as tees, bends, reducers, coupling, adopters etc. solvent welded joint as per manufacturer recommendation including cutting and making good the walls, floors, R.C.C. work etc. (For fixtures waste). |
| 312 | 40 mm (OD) |
| 313 | 50 mm (OD) |
| 314 | Providing and fixing UPVC floor drain including all fitting and accessories fixed in cement mortar complete in all respect.110 mm OD x 63 mm OD |
| 315 | Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.For 100mm dia. Pipe |
| 316 | Providing and fixing PTMT grating of approved quality and colour.125 mm nominal dia with 25 mm waste hole |
| 317 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround 100mm dia. SW / CI / waste pipes including bed concrete as per standard design |
| 318 | Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985-1983 class-III ) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site [For Balcony Drain + Terrace Rain Water Downtake Pipe].160 OD |
| 319 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 320 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 321 | Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (Exposed on wall Terrace) |
| 322 | 32 mm dia, nominal bore |
| 323 | 40 mm dia, nominal bore |
| 324 | Making connection of GI distribution branch with GI main of 50-80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete.25 to 40 mm nominal bore |
| 325 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) |
| 326 | 25 mm dia, nominal bore |
| 327 | 32 mm dia, nominal bore |
| 328 | 40 mm dia, nominal bore |
| 329 | Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality |
| 330 | 32 mm dia, nominal bore |
| 331 | 40 mm dia, nominal bore |
| 332 | Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete. |
| 333 | 20mm nominal bore |
| 334 | 25mm nominal bore |
| 335 | 32mm nominal bore |
| 336 | 40mm nominal bore |
| 337 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 338 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:893115mm nominal bore |
| 339 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm dia nominal bore |
| 340 | Provide and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D. plastic ball.50 mm dia NB, 242mm long. Weighing not less than 1240 gms. |
| 341 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.) |
| 342 | 15mm nominal outer dia. Pipes. |
| 343 | 20mm nominal outer dia. Pipes. |
| 344 | 25mm nominal outer dia. Pipes. |
| 345 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : |
| 346 | 50mm diameter |
| 347 | Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore 50 mm dia. |
| 348 | Providing, laying, Jointing, Testing and commissioning of uPVC pressure pipes of 10Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design. |
| 349 | 32 OD mm. |
| 350 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 351 | Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. |
| 352 | With F.P.S. bricks |
| 353 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: |
| 354 | 150 mm diameter |
| 355 | 200 mm diameter |
| 356 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : |
| 357 | 150 mm diameter S.W. pipe / RCC pipe |
| 358 | 200 mm diameter S.W. pipe / RCC pipe |
| 359 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 360 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe |
| 361 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 362 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 363 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 364 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 365 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 366 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 367 | For pipes 100 to 250 mm diameter |
| 368 | For pipes 350 to 450 mm diameter |
| 369 | Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 370 | FIRE FIGHTING |
| 371 | Supply, Installation, Testing and Commissioning of Electric Driven Main Fire Pump suitable for auto operation & consisting of following: complete in all respect as required.The pump shall also be capable of discharging not less than 150 % of the rated discharge at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of the rated head. (Sprinkler & Hydrant Pump).a)Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP Squirrel cage induction motor,TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018. (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e)Suitable cement concrete foundation duly plastered with anti vibration pads. Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. 2850 lpm at 70 m Head |
| 372 | Supply, Installation, Testing and Commissioning of Diesel Engine Driven Main Fire Pump suitable for auto operation and consisting of following: complete in all respect as required. The pump shall also be capable of discharging not less than 150 % of the rated discharge at a head of not less than 65% with the rated head. The shut off head shall not exceed 120% of the rated head.(a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel Driven Pump) (b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications,painted with post office red colour etc. as required. (d)M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.Note: * The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. 2280 lpm at 70 m Head |
| 373 | Supplying, Installation, Testing and Commissioning of Electric Driven Pressurization Pump (Jockey Pump) suitable for auto operation and consisting of following: complete in all respects as required. The pump shall also be capable of discharging not less than 150 % of the rated discharge at a head of not less than 65% with the rated head.(a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 suitable forautomatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (b)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class 'F' insulation, conforming to IS-12615: 2018.(d)M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.180 lpm at 70 m Head |
| 374 | Fabricating, Supplying, Installation, Testing and Commissioning Air Vessel of continuous welded construction with flanged discharge header on the top of each riser fabricated out of 6 mm thick MS sheet, Air Release Valve complete with suitable drain arrangement with 25 mm dia gun metal ball valve complete with all accessories etc. pressure gauge, synthetic enamel paint of approved shade as required of the following sizes 1.2 Meter high and 250 mm dia |
| 375 | Fabricating, Supplying, Installation, Testing and Commissioning Air Vessel of continuous welded construction with flanged discharge header on the top of each riser fabricated out of 8 mm thick MS sheet, Air Release Valve complete with suitable drain arrangement with 25 mm dia gun metal ball valve complete with all accessories etc. pressure gauge, synthetic enamel paint of approved shade as required of the following sizes .2 Meter high and 450 mm dia suitable to operate Jockey Pump, Main Fire Pump , Sprinkler pump & Diesel Engine Driven Fire Pump |
| 376 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required .Single headed Stainless steel |
| 377 | Supply, Installation, Testing and Commissioning of 63 mm dia. 15 Mtr. Long RRL hose pipe with 63 mm dia. male and female stainless steel couplings duly binded with GI wire rivets etc. ISI marked, IS 636 (type-A) as required. Stainless Steel (Grade 304) |
| 378 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304) |
| 379 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipmets on wall. (d)Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m |
| 380 | Supplying, installation, testing and commissioning of weather proof M.S cabinet size 1200 mm x 2100 mm x 600mm deep fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following.The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade. |
| 381 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male & female instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 382 | 2 way - 100 mm dia M.S. Pipe |
| 383 | 4 way - 150 mm dia M.S. Pipe |
| 384 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :(The Welding shall not be done for piping less than 50 mm dia.) |
| 385 | 150 mm dia |
| 386 | 100 mm dia |
| 387 | 80 mm dia |
| 388 | 65 mm dia |
| 389 | 50 mm dia |
| 390 | 40 mm dia |
| 391 | 32 mm dia |
| 392 | 25 mm dia |
| 393 | Supplying, Installation, Testing and Commissioning of Butterfly valves of PN 1.6 rating of following sizes with EPDM rubber lining seat and CF-8 stainless steel disc duly ISI marked and stainless steel stem with lever/gear operation and cast iron body in powder coated finish for fire fighting application complete in all respects confirming to IS: 13095 as required. |
| 394 | 150 mm dia |
| 395 | 65 mm dia |
| 396 | Providing, Installation, Testing and Commissioning of double flanged cast iron Dual Plat Check Valve (Non-Return Valve), PN 1.6 of following sizes confirming to IS : 5312 complete with EPDM rubber lining seat and stainless steel disc, rubber gasket, Gl bolts, nuts, washers etc. as required. |
| 397 | 150 mm dia |
| 398 | 65 mm dia |
| 399 | Supplying, Installation, Testing and Commissioning of CI body flanged (both ends) type serviceable suction / Y strainer with (stainless steel / brass mesh) conforming to relevant IS specifications amended upto date complete including providing and fixing nuts, bolts, washers, gaskets etc. complete as required. |
| 400 | 150 mm dia |
| 401 | 65 mm dia |
| 402 | Providing & fixing double flanged Metallic expansion with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. |
| 403 | 150 mm dia |
| 404 | 65 mm dia |
| 405 | Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centrigade with required accessories : |
| 406 | Pendent Sprinkler |
| 407 | Sidewall Sprinkler |
| 408 | Providing & fixing of pressure gauge in M.S. pipe line including connection etc. as required. |
| 409 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.150mm dia |
| 410 | Supplying and fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926. |
| 411 | Powder Fire Extinguisher (Stored Pressure type) Capacity 09 Kg duly ISI marked conforming to IS: 15683:2006, with IS 14609, ISI marked ABC powder complete with squeeze grip release valve, discharge pipe locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: - 10ºC to + 55ºC. |
| 412 | Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006 4.5kg capacity cylinder |
| 413 | Providing and fixing in position approved make fire bucket of 24 gauge, galvanized steel, standard 9 liters capacity and of round bottom shape, panted white inside and red outside and black on bottom dome with letters ‘FIRE’ in black and gold with all mounting bracket and screws. |
| 414 | Providing and fixing of fire Bucket Stand including sheet metal (16 gauge) shade for 2 buckets. Platform and associated civil works complete. |
| 415 | Supplying, assembling, erecting, connecting, testing and commissioning of Outdoor type fire fighting double door lockable type with epoxy paint. This panel shall be mounting on MS/brick pedestal support upto 400 mm high from ground level,cubical, dust, vermin proof and outdoor type (IP65) fabricated as per specification laid in document with following incomming and outgoing feeders including making connections/inter-connections testing and earthing etc. required with necessary interlocking with existing panel as shown in drawing as per specification and mounted with the followings.1 No. - 630A 4P ATS .1 No. - 630A TPN MCCB of fault breaking capacity 50 kA (Ics = Icu upto 500V), fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS-13947-2 1993 as amended up-to-date complete with following accessories for each MCCB.Independent electrical/manual spring closing mechanism - 1 No.Microprocessor releases based relay(EMI & EMC certified) for over current, earth fault & short circuit protections with trip indications for each - 1 set.Dual core calibrated digital Multifunctional meter of class 1.0 to record demand (KVA), energy (KWH & KVAH), power factor, current (in each phase and the neutral), voltage (between phases and between each phase and neutral) and 3 Nos. dual core CT of A Class 1.0 accuracy and 15 VA burden. Following indicating lamps and push buttons for each MCCB with back up 2A SP MCB .3 No. Phase indicating Lamps .Indicating Lamps for the following;Bus Bar800 Amp. 50 kA, TPN Al. Bus BarOutgoings: Following rated 420V,50KA MCCB's with overcurrent and short circuit releases Microprocessor based with ON,Trip indications, front operating handle & door interlock along with 2A SP MCB backup protection and control terminals & wiring as required. etc. complete in all respects as mentioned in specifications and as required For each outgoing: 125 Amp. TP MCCB -4 Nos.(4 spare)16 Amp. TP MCCB -2 Nos.(2 spare)Fully automatic Star Delta starter suitable for operating 2280 lpm (50 HP) motors/fan capacity, complete with contactors,Timer, overload protection relay, current sensing type single phase preventer, ON indications, push buttons, auto / manual / off selector switch,other accessories. complete as required. - 4 set.Fully automatic DOL starter suitable for operating 180 lpm (4.0 HP) HP motors/fan capacity, complete with contactors,Timer, overload protection relay, current sensing type single phase preventer, ON indications, push buttons, auto / manual / off selector switch,other accessories. complete as required. - 2 set.The Panel shall have necessary arrangement to start the pumps at automatic mode in following sequence. a) The Jockey Pump is start to maintain the drop in pressure in pipe line and also in case of opening of any hydrant to maintain the required pressure. b) The main fire pump will start in case of jockey doesnot able to maintain the required pressure due to opening of any fire hydrant. c) To start the diesel engine operated fire pump in case of failure of power supply or in case of minimum fire pump is not able to required pressure.(d) Diesel Engine ControlControl for Diesel Engine comprising:-(i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode. (ii) Indication lamp for High Water Temp. and Engine on indication and suitable tripping devices, overload, earth fault protection relays etc as required. (iii)Battery charger suitable for 12 V/24 V DC with boost and tickle selector switch 0-15V/0-30V DC meter 0-20A DC Ammeter. (iv) All standard relays and accessories for automatic operation of diesel engine.(e) System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of Main Fire Pump, Pressurization Pump in sequence as per specification consisting of relays, timers, sensor, annunciation window for fault indication, complete as per specification.Fire panel as above |
| 416 | ELECTRICAL CABLES |
| 417 | Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium / Copper conductor armoured cables as per specification as required.PVC/ XLPE insulated PVC sheathed heavy duty, armoured electrical cables with Aluminium conductor for working voltage upto and including 1100volts ( conforms to IS:1554, Part-1) |
| 418 | 3.1/2 core 120sq. mm. |
| 419 | 3.1/2 core 50sq. mm. |
| 420 | 4 core 10 sq. mm. |
| 421 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 422 | Above 35 sq. mm and upto 95 sq. mm |
| 423 | Above 95 sq. mm and upto 185 sq. mm |
| 424 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size cables in the existing RCC/ HUME/ Stoneware/ Metal pipe as required Upto 35 sq. mm |
| 425 | Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade. |
| 426 | 3.1/2 core 120sq. mm. |
| 427 | 3.1/2 core 50sq. mm. |
| 428 | 4 core 10sq. mm. |
| 429 | AC WORKS |
| 430 | 1.0 TR 5 Star Split AC (Inverter Type) IS 1391 Part -1 |
| 431 | 1.5 TR 5 Star Split AC (Inverter Type) IS 1391 Part -1 |
| 432 | 2.0 TR 5 Star Split AC (Inverter Type) IS 1391 Part -1 |
| 433 | Copper tube of size 1/4\\" for split AC unit 1/1.5/2/3 TR capacity including nitrile rubber insulation |
| 434 | Copper tube of size 1/2\\" for split AC unit 1/1.5/2/3 TR capacity including nitrile rubber insulation |
| 435 | Copper tube of size 3/8\\" for split AC unit 1/1.5/2/3 TR capacity including nitrile rubber insulation |
| 436 | Copper tube of size 5/8\\" for split AC unit 1/1.5/2/3 TR capacity including nitrile rubber insulation |
| 437 | 4 kVA wall mounted automatic voltage stabilizer from ranges 140V to 280V |
| 438 | 5 kVA wall mounted automatic voltage stabilizer from ranges 140V to 280V |
| 439 | Drain Pipe for AC |
| 440 | Outdoor stand for 1.5 TR Split AC |
| 441 | Outdoor stand for 2.0 TR Split AC |
| 442 | FR PVC insulated 3 core 4 sqmm copper wire |
| 443 | 200 CFM Propeller Fan |
| 444 | 500 CFM Inline Fan |
| 445 | 800 CFM Inline Fan |
| 446 | 1200 CFM Inline Fan |
| 447 | Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation to IS : 655 and approved drawings and specifications of following sheet thickness complete as required. |
| 448 | 0.63 mm thick |
| 449 | 0.80 mm thick |
| 450 | Supplying, Fixing, installation, testing and commissioning of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers in confirmation to SMACNA/IS and as per specifications complete etc. as required. |
| 451 | Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required.Size: 300 mm width X 50 mm depth X 1.6 mm thickness |
| 452 | Supply Installation Testing and Commissioning of 55-inch 4K UHD LED display designed for professional signage, featuring a slim 13.5mm bezel, 3840x2160 resolution, 350 nits brightness, and 178° wide viewing angles. Powered by a 1.7GHz quad-core processor with 2.5GB RAM and 8GB storage, it runs on 4.0 with MagicInfo S6 for easy content management. Connectivity includes HDMI 2.0, DVI-D, USB 2.0, and RS232C, making it ideal for 16/7 commercial use. Approved Make :- Samusng/LG/Sony. |
| 453 | Supply, Installation, Testing & Commissioning of 8\\" Full Range Ceiling Speaker. This 8\\" full-range ceiling speaker offers clear, balanced sound, ideal for commercial, hospitality, and residential spaces. With a frequency response of 69 Hz – 20 kHz (-3 dB) and extended range to 50 Hz (-10 dB), it delivers warm lows, clear mids, and crisp highs. It handles 20W continuous and 80W peak power, with a 105 dB max SPL and 97 dB sensitivity for efficient performance. A 90° conical coverage ensures even sound dispersion. Compatible with 8 Ohm and 100V/70V systems, it includes transformer taps (20W/10W/5W) for flexible installation across various audio setups.Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 454 | Supplying, testing, installing, and commissioning a 350W 6-Zone Mixer Amplifier, designed to deliver powerful and versatile audio performance for multi-zone setups. This amplifier supports 6 zones with a rated power of 400W at 4 Ohms, 100V, or 70V. It features 6 inputs, including 3 mic inputs, 2 aux inputs, and 1 media input compatible with USB and Bluetooth 4.0 for seamless wireless connectivity. The amplifier offers essential features like a priority input on Mic Input 1 and individual controls for gain, mute, and zonal volume, along with bass and treble adjustment pots for precise sound tuning. It also includes media player controls, zone select push buttons, and monitor-out selection for ease of use. Built with a compact steel chassis, the unit can be desktop-mounted or installed in a 19\\" standard rack using the provided mount ears. It ensures high-quality audio with a signal-to- noise ratio of -100 dB and a THD of less than 0.02% at both 4 and 8 Ohms. The design features controlled increment ABS knobs for smooth adjustments and efficient cooling through a temperature-controlled fan, ensuring reliable operation. Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 455 | Supply Installation Testing Commisioning of an 18\\" Gooseneck Microphone with the below specifications:- Type: Electret Condenser, Polar Pattern: Supercardioid, Freq. Response: 20-17 kHz, Max SPL: 140 dB, Working Volatge: 48V DC Phantom Power.Approved Makes: Shure/ OSL/ DPA. |
| 456 | Supply Installation Testing & Commissioning of 14 AWG 2 Core Speaker Cable with the below specifications:- Core Arrangement : 2,Gauge : 14 AWGMaterial : Stranded Bare Copper - Oxygen Free,Shielding : Unshielded,Jacket Material : TPR,Bend Radius: 4x DiameterApproved Makes: Sommer/ Belden/ Netmas. |
| 457 | Supply Installation Testing & Commissioning of 4.6 Meters 4K HDMI patch cord in existing conduit.Approved Make : Kramer /RGB Spectrum/Lightware. |
| 458 | Supply, Installation, Testing & Commissioning of 65\\" 4K UHD(3840 X 2160) resolution LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Double Core Mali 600 MHz GPU, with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in Bluetooth Ver.4, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1. Approved Make :- Samusng/LG/Sony. |
| 459 | Supply and Laying of 7.6 Meters 4K HDMI patch cord in existing conduit. Approved Make:- Kramer /RGB Spectrum/Lightware. |
| 460 | Supply, Installation, Testing & Commissioning of 8\\" Full Range Ceiling Speaker. This 8\\" full-range ceiling speaker offers clear, balanced sound, ideal for commercial, hospitality, and residential spaces. With a frequency response of 69 Hz – 20 kHz (-3 dB) and extended range to 50 Hz (-10 dB), it delivers warm lows, clear mids, and crisp highs. It handles 20W continuous and 80W peak power, with a 105 dB max SPL and 97 dB sensitivity for efficient performance. A 90° conical coverage ensures even sound dispersion. Compatible with 8 Ohm and 100V/70V systems, it includes transformer taps (20W/10W/5W) for flexible installation across various audio setups.Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 461 | Supplying, testing, installing, and commissioning a 350W 6-Zone Mixer Amplifier, designed to deliver powerful and versatile audio performance for multi-zone setups. This amplifier supports 6 zones with a rated power of 400W at 4 Ohms, 100V, or 70V. It features 6 inputs, including 3 mic inputs, 2 aux inputs, and 1 media input compatible with USB and Bluetooth 4.0 for seamless wireless connectivity. The amplifier offers essential features like a priority input on Mic Input 1 and individual controls for gain, mute, and zonal volume, along with bass and treble adjustment pots for precise sound tuning. It also includes media player controls, zone select push buttons, and monitor-out selection for ease of use. Built with a compact steel chassis, the unit can be desktop-mounted or installed in a 19\\" standard rack using the provided mount ears. It ensures high-quality audio with a signal-to- noise ratio of -100 dB and a THD of less than 0.02% at both 4 and 8 Ohms. The design features controlled increment ABS knobs for smooth adjustments and efficient cooling through a temperature-controlled fan, ensuring reliable operation. Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 462 | Supply Installation Testing Commisioning of an 18\\" Gooseneck Microphone with the below specifications:- Type: Electret Condenser, Polar Pattern: Supercardioid, Freq. Response: 20-17 kHz, Max SPL: 140 dB, Working Volatge: 48V DC Phantom Power.Approved Makes: Shure/ OSL/ DPA. |
| 463 | Supply Installation Testing & Commissioning of 14 AWG 2 Core Speaker Cable with the below specifications:- Core Arrangement : 2,Gauge : 14 AWGMaterial : Stranded Bare Copper - Oxygen Free,Shielding : Unshielded,Jacket Material : TPR,Bend Radius: 4x DiameterApproved Makes: Sommer/ Belden/ Netmas. |
| 464 | Supply Installation Testing & Commissioning of 4.6 Meters 4K HDMI patch cord in existing conduit.Approved Make : Kramer /RGB Spectrum/Lightware. |
| 465 | Supply, Installation, Testing & Commissioning of 8\\" Full Range Ceiling Speaker. This 8\\" full-range ceiling speaker offers clear, balanced sound, ideal for commercial, hospitality, and residential spaces. With a frequency response of 69 Hz – 20 kHz (-3 dB) and extended range to 50 Hz (-10 dB), it delivers warm lows, clear mids, and crisp highs. It handles 20W continuous and 80W peak power, with a 105 dB max SPL and 97 dB sensitivity for efficient performance. A 90° conical coverage ensures even sound dispersion. Compatible with 8 Ohm and 100V/70V systems, it includes transformer taps (20W/10W/5W) for flexible installation across various audio setups.Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 466 | Supplying, testing, installing, and commissioning a 350W 6-Zone Mixer Amplifier, designed to deliver powerful and versatile audio performance for multi-zone setups. This amplifier supports 6 zones with a rated power of 400W at 4 Ohms, 100V, or 70V. It features 6 inputs, including 3 mic inputs, 2 aux inputs, and 1 media input compatible with USB and Bluetooth 4.0 for seamless wireless connectivity. The amplifier offers essential features like a priority input on Mic Input 1 and individual controls for gain, mute, and zonal volume, along with bass and treble adjustment pots for precise sound tuning. It also includes media player controls, zone select push buttons, and monitor-out selection for ease of use. Built with a compact steel chassis, the unit can be desktop-mounted or installed in a 19\\" standard rack using the provided mount ears. It ensures high-quality audio with a signal-to- noise ratio of -100 dB and a THD of less than 0.02% at both 4 and 8 Ohms. The design features controlled increment ABS knobs for smooth adjustments and efficient cooling through a temperature-controlled fan, ensuring reliable operation. Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 467 | Supply Installation Testing Commisioning of an 18\\" Gooseneck Microphone with the below specifications:- Type: Electret Condenser, Polar Pattern: Supercardioid, Freq. Response: 20-17 kHz, Max SPL: 140 dB, Working Volatge: 48V DC Phantom Power.Approved Makes: Shure/ OSL/ DPA. |
| 468 | Supply Installation Testing & Commissioning of 14 AWG 2 Core Speaker Cable with the below specifications:- Core Arrangement : 2,Gauge : 14 AWGMaterial : Stranded Bare Copper - Oxygen Free,Shielding : Unshielded,Jacket Material : TPR,Bend Radius: 4x DiameterApproved Makes: Sommer/ Belden/ Netmas. |
| 469 | Supply Installation Testing & Commissioning of 4.6 Meters 4K HDMI patch cord in existing conduit.Approved Make : Kramer /RGB Spectrum/Lightware. |
| 470 | Supply, Installation, Testing & Commissioning of 8\\" Full Range Ceiling Speaker. This 8\\" full-range ceiling speaker offers clear, balanced sound, ideal for commercial, hospitality, and residential spaces. With a frequency response of 69 Hz – 20 kHz (-3 dB) and extended range to 50 Hz (-10 dB), it delivers warm lows, clear mids, and crisp highs. It handles 20W continuous and 80W peak power, with a 105 dB max SPL and 97 dB sensitivity for efficient performance. A 90° conical coverage ensures even sound dispersion. Compatible with 8 Ohm and 100V/70V systems, it includes transformer taps (20W/10W/5W) for flexible installation across various audio setups.Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 471 | Supplying, testing, installing, and commissioning a 350W 6-Zone Mixer Amplifier, designed to deliver powerful and versatile audio performance for multi-zone setups. This amplifier supports 6 zones with a rated power of 400W at 4 Ohms, 100V, or 70V. It features 6 inputs, including 3 mic inputs, 2 aux inputs, and 1 media input compatible with USB and Bluetooth 4.0 for seamless wireless connectivity. The amplifier offers essential features like a priority input on Mic Input 1 and individual controls for gain, mute, and zonal volume, along with bass and treble adjustment pots for precise sound tuning. It also includes media player controls, zone select push buttons, and monitor-out selection for ease of use. Built with a compact steel chassis, the unit can be desktop-mounted or installed in a 19\\" standard rack using the provided mount ears. It ensures high-quality audio with a signal-to- noise ratio of -100 dB and a THD of less than 0.02% at both 4 and 8 Ohms. The design features controlled increment ABS knobs for smooth adjustments and efficient cooling through a temperature-controlled fan, ensuring reliable operation. Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 472 | Supply Installation Testing & Commissioning of 14 AWG 2 Core Speaker Cable with the below specifications:- Core Arrangement : 2,Gauge : 14 AWGMaterial : Stranded Bare Copper - Oxygen Free,Shielding : Unshielded,Jacket Material : TPR,Bend Radius: 4x DiameterApproved Makes: Sommer/ Belden/ Netmas. |
| 473 | Supply Installation Testing & Commissioning of 4.6 Meters 4K HDMI patch cord in existing conduit.Approved Make : Kramer /RGB Spectrum/Lightware. |
| 474 | Supply, Installation, Testing & Commissioning of 75\\" display offers a 3840 x 2160 resolution with 350 nits typical brightness and a 4000:1 contrast ratio. It features a 0.429 x 0.429 mm pixel pitch, 178° viewing angles (H/V), 8 ms response time, 72% NTSC color gamut, and 2% haze. Designed for 16/7 operation, it supports dynamic contrast ratio “Mega.” Connectivity includes 3 HDMI 2.0 ports (HDCP 2.2), 2 USB 2.0 ports, stereo mini jack audio out, RS232 (in/out), RJ45, Wi-Fi, and Bluetooth; no DisplayPort or audio input is provided. The power supply operates at AC 100–240V, 50/60Hz with typical power consumption of 214.5 W and sleep mode under 0.5 W. Approved Make :- Samusng/LG/Sony. |
| 475 | Supply Installation Testing & Commissioning of 4.6 Meters 4K HDMI patch cord in existing conduit.Approved Make : Kramer /RGB Spectrum/Lightware. |
| 476 | Supplying, testing, installing, and commissioning a 6 x 4\\" Columnar Array System designed for exceptional audio performance and durability. This system features a frequency response of 170 Hz to 20 kHz (-3 dB) and a frequency range of 150 Hz to 20 kHz (-10 dB), ensuring high-quality sound reproduction. With a rated power of 150W Continuous and 600W Peak, the system delivers a maximum SPL of 122 dB and a sensitivity of 86 dB, making it ideal for various applications. Its nominal impedance is 8 Ohms or 100/70V, with transformer taps at 120W for compatibility with different setups. The system is housed in a rugged ABS enclosure with an IP66 rating for weather resistance, and a powder-coated, rust-free grill enhances durability and aesthetics. It includes 6 x 4.5\\" Vero-loaded LF drivers with 1\\" VC Ferrite, providing excellent audio clarity and coverage with a pattern of 140° x 20°. This versatile and robust system is built for reliable performance in demanding environments.Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 477 | Supplying, testing, installing, and commissioning a 350W 6-Zone Mixer Amplifier, designed to deliver powerful and versatile audio performance for multi-zone setups. This amplifier supports 6 zones with a rated power of 400W at 4 Ohms, 100V, or 70V. It features 6 inputs, including 3 mic inputs, 2 aux inputs, and 1 media input compatible with USB and Bluetooth 4.0 for seamless wireless connectivity. The amplifier offers essential features like a priority input on Mic Input 1 and individual controls for gain, mute, and zonal volume, along with bass and treble adjustment pots for precise sound tuning. It also includes media player controls, zone select push buttons, and monitor-out selection for ease of use. Built with a compact steel chassis, the unit can be desktop-mounted or installed in a 19\\" standard rack using the provided mount ears. It ensures high-quality audio with a signal-to- noise ratio of -100 dB and a THD of less than 0.02% at both 4 and 8 Ohms. The design features controlled increment ABS knobs for smooth adjustments and efficient cooling through a temperature-controlled fan, ensuring reliable operation. Approved Makes: OHM/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics/ Renkus Heinz. |
| 478 | Supply Installation Testing Commisioning of a Video Conference Server with the below specifications:-Max. Conference Microphones: 800, Frequency Response: 20 - 20kHz, Dynamic Range: >85 dB, Auto PC Software for a controlled meeting, Anti-feedback control, Audio Inputs & Outputs to connect to the amplifier, speaker and microphone systemsApproved Makes: Shure/OSL/ Sennheiser/ Beyerdynamic. |
| 479 | Supply Installation Testing & Commissioning of a Chairman Unit with the below specifications:- Press to Speak & Priority Functions, Commence Vote Option, Built-in Spekaer system & headphone output. Includes (1) 18\\" Gooseneck Microphone (true condenser, super-cardioid)Approved Makes: Shure/OSL/ Sennheiser/ Beyerdynamic. |
| 480 | Supply Installation Testing & Commissioning of a Delegate Unit with the below specifications:- 3-button Voting Options, Built-in Spekaer system & headphone output. Includes (1) 18\\" Gooseneck Microphone (true condenser, super-cardioid)Approved Makes: Shure/OSL/ Sennheiser/ Beyerdynamic. |
| 481 | Supply Installation Testing & Commissioning of 14 AWG 2 Core Speaker Cable with the below specifications:- Core Arrangement : 2,Gauge : 14 AWGMaterial : Stranded Bare Copper - Oxygen Free,Shielding : Unshielded,Jacket Material : TPR,Bend Radius: 4x DiameterApproved Makes: Sommer/ Belden/ Netmas. |
| 482 | FURNITURE |
| 483 | Model: Free Standing Table/MODSize: 1745Wx600Dx750H mm.Supplying and placing in position of office desk structure of rectangular shape. Primary work surface 25mm thick table top made of prelaminated particle board work surface with the hot melt glue used for fixing the 2mm thick PVC edge banding made of same matte finish, wire management hole with PVC grommet on table top. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 484 | Model: Free Standing Table/MODSize: 1300Wx600Dx750H mm.Supplying and placing in position of office desk structure of rectangular shape. Primary work surface 25mm thick table top made of prelaminated particle board work surface with the hot melt glue used for fixing the 2mm thick PVC edge banding made of same matte finish, wire management hole with PVC grommet on table top. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 485 | Model: 65 Series, Modular Partition 1200 mm HeightSupplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 486 | Model: Define, Premium Mesh Chair, Medium BackSupplying, and placing in position of medium back 360°-degree revolving chair.Chair Dimension: 630Wx660Dx1040H mm. ,The chair made of full mesh in black colour.it will come in matte finish in contemporary style.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Gas lift 100 mm telescopic hydraulic . Base: 650 mm chrome base with smooth castors.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 487 | Waiting Area |
| 488 | Model: Milton/F Reception Desk, Size: 2400Wx900Dx750/1100H mm.Supplying, and placing in position of Reception Desk top shall be made of 25mm thick pre-lam particle board, table top 18 mm thick counter top to table top height is @ 300mm, overall reception desk height is @ 1050mm with counter top. one mobile pedestal (2 drawers + 1 filing cabinet) size is 400 mm(l)x 450 mm(d)x 600 mm(h).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 489 | Model: Define, Premium Mesh Chair, Medium BackSupplying, and placing in position of medium back 360°-degree revolving chair.Chair Dimension: 630Wx660Dx1040H mm. ,The chair made of full mesh in black colour.it will come in matte finish in contemporary style.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Gas lift 100 mm telescopic hydraulic . Base: 650 mm chrome base with smooth castors.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 490 | Model: Nixon 3 Seater Supplying and Placing in Position of three-seater waiting area chair nixon size: 1820Wx690Dx790H mm. Material: Mild Steel the complete mild steel bench has seat & back single section. per seat length is @ 520 mm & seating height is @ 430 mm from ground. owing to the smooth finish, durability and tensile strength beam made of mild steel 1.6mm thick. Seat is made by 1.2mm thick mild steel border with chrome plating for every seat & back; mild steel handles chrome plated & die pressed legs at the end of chairs. Gross weight of regular 3-seater will be 31 kg. The steel grade 202 high yield strength as per is:513 & is:304 grade.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 491 | Model: Presley X Odyssey Edit, Linen 3 Seater Sofa in Pecan BeigeSupplying and placing in position of three seater sofa Dimension: (W) 1900mm X (D) 930mm X (H) 890mm, Seating Height 440mm, Arm height 610mm, Seat Depth 600mm, Back Height 440mm, Material & Subtype Fabric - Linen, PVC, Composition Polyester, Frame Material Solid Wood, Upholstery Material Fabric - Linen Filling Material Foam Seat Material Fabric - Linen, Leg Material PVC, Finish Matte, Colour & Colour Family Beige - PecanThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 492 | Model: Presley X Odyssey Edit, Linen 2 Seater Sofa in Pecan BeigeSupplying and placing in position of two seater sofa Dimension: (W) 1400mm X (D) 930mm X (H) 890mm, Seating Height 440mm, Arm height 610mm, Seat Depth 600mm, Back Height 440mm, Material & Subtype Fabric - Linen, PVC, Composition Polyester, Frame Material Solid Wood, Upholstery Material, Fabric - Linen Filling Material Foam Seat Material Fabric - Linen, Leg Material PVC, Finish Matte, Colour & Colour Family Beige - PecanThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 493 | Model: Presley, Solid Wood Coffee Table in Dark Oak FinishSupplying, and placing in position of center table Material & Subtype: Solid Wood - Pine Wood, Table Top Material: Solid Wood, Frame Material: Solid Wood, Leg Material: Solid Wood, Finish: Matte, Colour & Colour Family: Brown - Dark OakTable, Dimension: (W) 1200mm X (D) 600mm X (H) 460mm Top Thickness: 25mm The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 494 | Model: Presley, Solid Wood Side Table in Dark Oak FinishSupplying, and placing in position of Presley, Solid Wood Side Table Material & Subtype: Solid Wood - Pine Wood, Table Top Material: Solid Wood, Frame Material: Solid Wood, Leg Material: Solid Wood, Finish: Matte, Colour & Colour Family: Brown - Dark OakTable, Dimension: (W) 600mm X (D) 450mm X (H) 460mm Top Thickness: 25mm The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 495 | Supplying and placing in position of Canteen Table Size: 900Wx900Dx750H mm. Tabletop: 25mm thick prelam particle board with PVC edge banding.Understructure: Tabletop supported with Powder coated \\"C\\" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 25mm.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 496 | Supplying and placing in position of stackable modern design cafeteria chair - coco material : synthetic fiber size : 381mm(l)x 419mm(d)x 839mm(h). colour : red/blue/yellow/black / finish : shiny for legs, Supplying & providing cafeteria chair size is 381mm(l)x 419mm(d)x 839mm(h) a combination of synthetic fiber with stainless steel make the products utile and a delight, the complete structure shall be made up of 20% glass filled blow molded high-density polyethylene andis,the frame structure shall be supported by ( 2 straight + 2 slant ) four legs.the tubular welded frame is made from dia2.22 +/- 0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am stainless steel 202 grade tube & the tube are buff polished to give shiny finish.seat and in back given handle to hold are made of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance and pressed fitted with legs.the chair is easy to store when not in use, since you can stack up to 6 chairs on top of each other. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 497 | Model: MJF/61101/A,Overall Size: 2800Wx2330Lx770H mm.Supplying, and placing in position of table as per photograph. This precise Durian Boss's Desk is designed with superb quality Finish made of engineered wood-medium density fibre board & veneer glossy finish on the same. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size. The modesty frame of the table gives the great look with panel upholstered with PVC material which gives the leatherette look. Main Table top thickness 80mm, side panel/gable end in 70mm thick MDF with Veneer glossy finish. Side runner having a skirting @120mm thick with gives a rich look. The office desk comes with the side runner having enough storage space. The side runner top with a thickness of 80mm thick that gives the great look. Side table, side panel, shelves, drawers made up of 18mm thick MDF with Veneer finish. Table having a provision of Pedestal of size: 400Wx500Dx660H mm having three drawers to store essential & unrestructured made out of 18mm thick MDF with Veneer finish. Drawers have the stylish handle which enhance the look. Material & Subtype: Engineered Wood - Medium Density Fibre Board, Colour & Colour Family: Red - Cherry. Side storage unit having a side panel, one drawer, one shutter & one shelf of 18mm thick MDF with Veneer finish. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 498 | Model: MJF Back Unit.Supplying, and placing in position of modular back unit Size: 2400Wx400Dx1040H mm. top shall be made from 25 mm thick prelaminated particle board/veneer - MDF/steam beech veneer of grade ii type iii of is 12823/latest & confirm to din 68861.iso 9001- 2015. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - MDF/steam beech veneer P.U polish. all edges to be provided with same matching veneer edge banding fixed with the hot melt glue. Storage unit with 3 open carcass, 4 shutters + 3 drawers’ construction is below the top 3 open carcass shelves at same size per carcass size is 555 (l) x 380 (h) ,2 openable doors with 1 fixed shelve + 3 drawer + 2 openable doors with 1 fixed shelve, in provided with 2 universal cam lock + 1 central locks for drawers for security and handles are provided for easy of opening. over all height of product is @ 1040 mm. Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality (make: ebco). for installation of side unit wooden dowels and Mini fix to use for additional support.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 499 | Model: Poise, Premium Leatherette Chair, High BackSupplying, and placing in position of high back 360°-degree revolving chair.Dimension: 640Wx500Dx1210H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 655mmThe chair made of full leatherette in black colour.it will come in matte finish in contemporary style.details:Arms: fixed chrome finish arms with PU padding.Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support. Mechanism: centre tilt mechanism.Only seat size is 665mm(l)x 500mm(d)x 580-495mm(h) & the back size is 665mm(l)x 580mm(h),seat maximum height is 635mm & minimum height is 540mm & back height from floor maximum height is 1210mm & minimum height is 1110mm. Gas lift 85mm telescopic hydraulic. Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 500 | Model: Poise, Premium Leatherette Chair, Low BackSupplying, and placing in position of low back 360°-degree revolving chair. Dimension: 625Wx490Dx1135H mm. Seat depth: 490mm, Back Height: 560mm. The chair made of full leatherette in black colour.it will come in matte finish in contemporary style.details:Arms: chrome finish arms with PU padding.Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support. Mechanism: centre tilt mechanism.Only seat size is 625mm(l)x 490mm(d)x 660-535mm(h) & the back size is 625mm(l)x 560mm(h)seat maximum height is 660mm & minimum height is 535mm & back height from floor maximum height is 1135mm & minimum height is 1035mm. Gas lift 95mm telescopic hydraulic. Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors)The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 501 | Model: Rubik, Velvet 2 Seater Sofa with Leatherette Side PocketsSupplying and placing in position of two seater sofa Dimension (W) 1500mm X (D) 940mm X (H) 920mm Seating Height 520mm, Arm height 780mm, Seat Depth 540mm, Back Height 440mm, Material & Subtype Premium Leatherette, Solid Wood - Steam Beech Wood, Fabric - Velvet, Composition Polyester, Frame Material Solid Wood, Upholstery Material Fabric - Velvet, Filling Material Foam, Seat Material Fabric - Velvet, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Beige - WesterThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 502 | Model: Rubik, Velvet 1 Seater Sofa with Leatherette Side PocketsSupplying and placing in position of Single seater sofa Dimension (W) 900mm X (D) 940mm X (H) 920mm Seating Height 520mm, Arm height 780mm, Seat Depth 540mm, Back Height 440mm Material & Subtype Premium Leatherette, Solid Wood - Steam Beech Wood, Fabric - Velvet, Composition Polyester, Frame Material Solid Wood, Upholstery Material Fabric - Velvet, Filling Material Foam, Seat Material Fabric - Velvet, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Beige - WesterThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 503 | Model: Rubik, Solid Wood Coffee Table in Walnut FinishSupplying, and placing in position of Rubik, Solid Wood Coffee Table Material & Subtype Solid Wood - Steam Beech Wood, Table Top Material Solid Wood, Frame Material Solid Wood, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Brown - Walnut, Dimension (W)1200mm X (D)600mm X (H)465mm, Table Top Thickness 22mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 504 | Model: Rubik, Solid Wood Side Table in Walnut FinishSupplying, and placing in position of Rubik, Solid Wood Coffee Table Material & Subtype Solid Wood - Steam Beech Wood, Table Top Material Solid WoodFrame Material Solid Wood, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Brown - Walnut, Dimension (W)400mm X (D)400mm X (H)510mm, Table Top Thickness 22mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 505 | Model: Danbury, Office Desk With Side Runner and PedestalOverall Size : 2400W x 1890D x 760H mmSupplying, and placing in position of Danbury Office Table With Side Runner and Pedestal.Top Finish: Ply with veener having high-resistance finish for scratch and stain protection.Leg Design: Gently curved base panels on both sides for aesthetic appeal and structural strength. Modesty Panel: Decorative front modesty panel with leatherette accent insert in black, framed with grooved molding for a premium look. Desk Pad: Centrally placed black leatherette writing pad integrated on the tabletop for comfortable writing and aesthetics. Designed with a movable drawer pedestal and side runner, this premium desk ensures a clutter-free work area, while the leatherette desk pad and cable organizer add a functional flair. Crafted from Plywood with veneer. Spacious tabletop offers ample workspace, ideal for multitasking and large projects. Gently curved silhouette with intricate moulding and leatherette accent adds a statement appeal. A leatherette desk pad offers a smooth and durable surface for writing and daily tasks. A movable pedestal unit features 3 spacious drawers. A side runner features 1 cabinet, 1 drawer, 1 shelf, a dedicated CPU shelf and a trolley. A keyboard trolley offers a clutter-free workspace. 2 Circular cable organisers keep the tabletop clutter-free. A dedicated CPU unit keeps your CPU neatly stored, leaving your desk clutter-free. Premium PU polish with low chemical emissions ensures healthy indoor air. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 506 | Model: Danbury/B, Office Desk With Side Runner and PedestalOverall Size : 2000W x 1790D x 760H mmSupplying, and placing in position of Danbury Office Table With Side Runner and Pedestal.Top Finish: Ply with veener having high-resistance finish for scratch and stain protection.Leg Design: Gently curved base panels on both sides for aesthetic appeal and structural strength. Modesty Panel: Decorative front modesty panel with leatherette accent insert in black, framed with grooved molding for a premium look. Desk Pad: Centrally placed black leatherette writing pad integrated on the tabletop for comfortable writing and aesthetics. Designed with a movable drawer pedestal and side runner, this premium desk ensures a clutter-free work area, while the leatherette desk pad and cable organizer add a functional flair. Crafted from Plywood with veneer. Spacious tabletop offers ample workspace, ideal for multitasking and large projects. Gently curved silhouette with intricate moulding and leatherette accent adds a statement appeal. A leatherette desk pad offers a smooth and durable surface for writing and daily tasks. A movable pedestal unit features 3 spacious drawers. A side runner features 1 cabinet, 1 drawer, 1 shelf, a dedicated CPU shelf and a trolley. A keyboard trolley offers a clutter-free workspace. 2 Circular cable organisers keep the tabletop clutter-free. A dedicated CPU unit keeps your CPU neatly stored, leaving your desk clutter-free. Premium PU polish with low chemical emissions ensures healthy indoor air. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 507 | Model: MJF Back Unit.Supplying, and placing in position of modular back unit Size: 2400Wx400Dx1040H mm. top shall be made from 25 mm thick prelaminated particle board/veneer - MDF/steam beech veneer of grade ii type iii of is 12823/latest & confirm to din 68861.iso 9001- 2015. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - MDF/steam beech veneer P.U polish. all edges to be provided with same matching veneer edge banding fixed with the hot melt glue. Storage unit with 3 open carcass, 4 shutters + 3 drawers’ construction is below the top 3 open carcass shelves at same size per carcass size is 555 (l) x 380 (h) ,2 openable doors with 1 fixed shelve + 3 drawer + 2 openable doors with 1 fixed shelve, in provided with 2 universal cam lock + 1 central locks for drawers for security and handles are provided for easy of opening. over all height of product is @ 1040 mm. Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality (make: ebco). for installation of side unit wooden dowels and Mini fix to use for additional support.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 508 | Model: OTTAWA/HBSupplying, and placing in position of Ottwa/Hb : High Back Chair - Colour : Rxt051-3 (Front) | Rxt051-16 (Back) - Fixed Armrest - Butterfly Mechanism - Chromed Gaslift - 350mm Chromed Base - White Pu Casters. Overall Size: 560Wx500Dx440-520/1135-1215 mm.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 509 | Model: OTTAWA/MBSupplying, and placing in position of Ottwa/Mb : Medium Back Chair - Colour : Rxt051-3 (Front) | Rxt051-16 (Back) - Fixed Armrest - Butterfly Mechanism - Chromed Gaslift - 320mm Chromed Base - White Pu Casters Overall Size: 560Wx500Dx440-520/985-1065 mm.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 510 | Model: Stevens, Velvet 3 Seater Sofa in Dark BlueSupplying and placing in position of three seater sofa Dimension: (W)2080mm X (D)970mm X (H)960mm Material & Subtype Fabric - Velvet, Solid Wood - Steam Beech Wood, Frame Material Solid Wood, Upholstery Material Fabric - Velvet, Filling Material Foam, Seat Material Fabric - Velvet, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Blue - DarkThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 511 | Model: Stevens, Velvet 2 Seater Sofa in Dark BlueSupplying and placing in position of two seater sofa Dimension: (W)1570mm X (D)970mm X (H)960mm Material & Subtype Fabric - Velvet, Solid Wood - Steam Beech Wood, Frame Material Solid Wood, Upholstery Material Fabric - Velvet, Filling Material Foam, Seat Material Fabric - Velvet, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Blue - DarkThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 512 | Model: Stevens, Velvet 1 Seater Sofa in Dark BlueSupplying and placing in position of single seater sofa Dimension: (W)880mm X (D)970mm X (H)960mm Material & Subtype Fabric - Velvet, Solid Wood - Steam Beech Wood, Frame Material Solid Wood, Upholstery Material Fabric - Velvet, Filling Material Foam, Seat Material Fabric - Velvet, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Blue - DarkThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 513 | Model: Presley, Solid Wood Coffee Table in Dark Oak FinishSupplying, and placing in position of center table Material & Subtype: Solid Wood - Pine Wood, Table Top Material: Solid Wood, Frame Material: Solid Wood, Leg Material: Solid Wood, Finish: Matte, Colour & Colour Family: Brown - Dark OakTable, Dimension: (W) 1200mm X (D) 600mm X (H) 460mm Top Thickness: 25mm The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 514 | Model: Presley, Solid Wood Side Table in Dark Oak FinishSupplying, and placing in position of Presley, Solid Wood Side Table Material & Subtype: Solid Wood - Pine Wood, Table Top Material: Solid Wood, Frame Material: Solid Wood, Leg Material: Solid Wood, Finish: Matte, Colour & Colour Family: Brown - Dark OakTable, Dimension: (W) 600mm X (D) 450mm X (H) 460mm Top Thickness: 25mm The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 515 | Model: DWS/34723Supplying and placing in position of office desk structure of l shaped desk. Table Size: 1500Wx600Dx750H mm. Side Unit Size: 1000Wx450Dx750H mm. Primary work surface 25mm thick table top made of prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. modesty panel 18made of mm thick. Provision of side unit of size is mm(l)x 450mm(d)x 750mm(h), (combination construction wire management hole with PVC grommet on table top, left side table top based on a 18mm thick side panel engineered wood & from right side unit have 2 sliding doors + 1 fixed shelve. Side unit in provided with lock for security and handles are provided for easy of opening. Overall construction of side unit is 18mm thick along with facia of sliding shutters. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 516 | Model: DWS/34723Supplying and placing in position of office desk structure of l shaped desk. Table Size: 1500Wx600Dx750H mm. Side Unit Size: 1000Wx450Dx750H mm. Primary work surface 25mm thick table top made of prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. modesty panel 18made of mm thick. Provision of side unit of size is mm(l)x 450mm(d)x 750mm(h), (combination construction wire management hole with PVC grommet on table top, left side table top based on a 18mm thick side panel engineered wood & from right side unit have 2 sliding doors + 1 fixed shelve. Side unit in provided with lock for security and handles are provided for easy of opening. Overall construction of side unit is 18mm thick along with facia of sliding shutters. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 517 | Model: Marvel, Premium Mesh Chair, High BackSupplying, and placing in position of high back 360°-degree revolving chair. Chair Dimension: 640Wx670Dx1350H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 815mm The chair made of full mesh in black colour.It will come in matte finish about style type is modern. Details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 815mm(h),seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1350mm & minimum height is 1250mm.Gas lift 100 mm telescopic hydraulic. Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 518 | Model: Marvel, Premium Mesh Chair, Medium BackSupplying, and placing in position of medium back 360° degree revolving.Chair Dimension: 640Wx670Dx1100H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 570mm. The chair made of full mesh in black colour.It will come in matte finish about style type is modern.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1100mm & minimum height is 1000mm. Gas lift 100 mm telescopic hydraulic Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 519 | Storage Size: 1650Wx450Dx750H mm.Supplying, and placing in position of storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 520 | Storage Size: 1500Wx450Dx750H mm.Supplying, and placing in position of storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 521 | Model: DWS/34758MOD Conference table in partsSupplying and placing in position of modern design conference table, Size: 2700Wx1200Dx750H mm. tabletop offers you a generous workspace, desk primary work surface use premium quality materials. Table top made of 36mm thick which give more surface area for work, prelaminated particle board, tabletop supported prelaminated particle board of grade ii type iii of is 12823/latest.Construction below table modesty between both the supporting panels length is @ 1480 mm, over all table height is @ 750 mm and the side panel size is 800 mm (l) x 700 mm(h). Our work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade, fixed with hot melt glue.Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 522 | Model: DWS/34758MOD Conference table in partsSupplying and placing in position of modern design conference table, Size: 5400Wx1800Dx750H mm. tabletop offers you a generous workspace, desk primary work surface use premium quality materials. Table top made of 36mm thick which give more surface area for work, prelaminated particle board, tabletop supported prelaminated particle board of grade ii type iii of is 12823/latest.Construction below table modesty between both the supporting panels length is @ 1480 mm, over all table height is @ 750 mm and the side panel size is 800 mm (l) x 700 mm(h). Our work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade, fixed with hot melt glue.Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 523 | Model: Marvel, Premium Mesh Chair, High BackSupplying, and placing in position of high back 360°-degree revolving chair. Chair Dimension: 640Wx670Dx1350H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 815mm The chair made of full mesh in black colour.It will come in matte finish about style type is modern. Details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 815mm(h),seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1350mm & minimum height is 1250mm.Gas lift 100 mm telescopic hydraulic. Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 524 | Model: Marvel, Premium Mesh Chair, Medium BackSupplying, and placing in position of medium back 360° degree revolving.Chair Dimension: 640Wx670Dx1100H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 570mm. The chair made of full mesh in black colour.It will come in matte finish about style type is modern.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1100mm & minimum height is 1000mm. Gas lift 100 mm telescopic hydraulic Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 525 | Model: Marvel, Mesh Chair, Medium BackSupplying, and placing in position of Fix cantilever chair.Chair Dimension: 605Wx575Dx1010H mm. Seating Height: 470mm, Seat depth: 500mm, Back Height: 550mm. The chair made of full mesh in black colour.It will come in matte finish in contemporary style.details:Arms: pp fixed padded armrest.Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support.Only seat size is 500mm(l)x 500mm(d)x 470mm(h) & the back size is 465mm(l)x 550mm(h),seat max height is @ 470mm.Fixed cantilever chair. Base: MS powder coated tubular frame of cantilever type.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 526 | Office Table - Hon'ble Judge Table Size: 2400L X 750D X 900/1050HTSupplying and placing in position of Hon'ble Judge Table top: 50MM THICK Steam beech wood with PU Melamine Polish finish.Understructure: 22MM THICK Steam beech wood with PU Melamine Polish finish with moulding design at front side.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 527 | Model: Legend, Ace - Leather Signature Chair in BlackSupplying, and placing in position of Legend, Ace - Leather Signature Chair Material & Subtype Leather, Upholstery Material Leather, Seat Material Leather, Finish Matte, Colour & Colour Family Black, Dimension (W)700mm X (D)700mm X (H)1120mm, Mechanism Synchro Single Locking, Maximum Seating Height 550mm, Function Revolving, Pneumatic Height LiftThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 528 | Model: MJF Back Unit.Supplying, and placing in position of modular back unit Size: 2400Wx400Dx1040H mm. top shall be made from 25 mm thick prelaminated particle board/veneer - MDF/steam beech veneer of grade ii type iii of is 12823/latest & confirm to din 68861.iso 9001- 2015. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - MDF/steam beech veneer P.U polish. all edges to be provided with same matching veneer edge banding fixed with the hot melt glue. Storage unit with 3 open carcass, 4 shutters + 3 drawers’ construction is below the top 3 open carcass shelves at same size per carcass size is 555 (l) x 380 (h) ,2 openable doors with 1 fixed shelve + 3 drawer + 2 openable doors with 1 fixed shelve, in provided with 2 universal cam lock + 1 central locks for drawers for security and handles are provided for easy of opening. over all height of product is @ 1040 mm. Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality (make: ebco). for installation of side unit wooden dowels and Mini fix to use for additional support.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 529 | LAWYER TABLE - Lawyer Table Size: 1500L X 750D X 750HT.Tabletop: 36MM THICK Steam beech wood tabletop with PU Melamine Polish finish. Side panel: 36MM THICK Steam beech wood with PU Melamine Polish finish with moulding design at front side. Modesty panel: 22MM THICK Steam beech wood with PU Melamine Polish finish with moulding design at front side.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 530 | Model: Marvel, Premium Mesh Chair, Medium BackSupplying, and placing in position of medium back 360° degree revolving.Chair Dimension: 640Wx670Dx1100H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 570mm. The chair made of full mesh in black colour.It will come in matte finish about style type is modern.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1100mm & minimum height is 1000mm. Gas lift 100 mm telescopic hydraulic Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 531 | Model: Nixon 3 Seater Supplying and Placing in Position of three-seater waiting area chair nixon size: 1820Wx690Dx790H mm. Material: Mild Steel the complete mild steel bench has seat & back single section. per seat length is @ 520 mm & seating height is @ 430 mm from ground. owing to the smooth finish, durability and tensile strength beam made of mild steel 1.6mm thick. Seat is made by 1.2mm thick mild steel border with chrome plating for every seat & back; mild steel handles chrome plated & die pressed legs at the end of chairs. Gross weight of regular 3-seater will be 31 kg. The steel grade 202 high yield strength as per is:513 & is:304 grade.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 532 | Model: Workstation Size: 1500Wx1500Lx600Dx750/1200H mm. With Pedestal Size: 400Wx450Dx725H mm.Supplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Combination construction below table top fixed pedestal size 400 mm(l)x 450 mm(d)x 725 mm(h) - (2 drawers + 1 filling drawer), 18 mm thick made of prelaminated particle board duly edge baned. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 533 | Model: 65 Series, Linear WorkstationsSupplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Combination construction below table top fixed pedestal size 400 mm(l)x 450 mm(d)x 725 mm(h) - (2 drawers + 1 filling drawer), 18 mm thick made of prelaminated particle board duly edge baned. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 534 | Model: Define, Premium Mesh Chair, Medium BackSupplying, and placing in position of medium back 360°-degree revolving chair.Chair Dimension: 630Wx660Dx1040H mm. ,The chair made of full mesh in black colour.it will come in matte finish in contemporary style.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Gas lift 100 mm telescopic hydraulic . Base: 650 mm chrome base with smooth castors.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 535 | Storage Size: 1200Wx450Dx1200H mm.Supplying, and placing in position of storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 536 | Board Meeting Room |
| 537 | Model: Free Standing Table/MODSize: 2400Wx750Dx750H mm.Supplying and placing in position of office desk structure of rectangular shape. Primary work surface 25mm thick table top made of prelaminated particle board work surface with the hot melt glue used for fixing the 2mm thick PVC edge banding made of same matte finish, wire management hole with PVC grommet on table top. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 538 | Model: Marvel, Premium Mesh Chair, High BackSupplying, and placing in position of high back 360°-degree revolving chair. Chair Dimension: 640Wx670Dx1350H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 815mm The chair made of full mesh in black colour.It will come in matte finish about style type is modern. Details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 815mm(h),seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1350mm & minimum height is 1250mm.Gas lift 100 mm telescopic hydraulic. Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 539 | Model: Obelisk PodiumSize: 550Wx550Dx1200H mm.Providing & supplying vintage podium top & side panels made in 18mm thick prelaminated particle board of grade ii type iii of is 12823/latest with machine pressed exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade fixed duly pasted with the assistance of edge banding machine at 200 degrees Celsius.The podium houses a flat table top to keep notes handy while allowing for wiring and a stand for mic. the podium design is vintage with fine moulding along the edges of the frame. using a combination of prelaminated particle board obelisk is a fabulous example of a podium setting to deliver speeches and lectures at halls andauditoriums.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 540 | Model: ALIGN, ALIGN/GSupplying and placing in position of Flip Training Chair Powder Coated Without Pad And Wheel,, Filp Backrest Is Made Of PP Upholested With Mesh., Backrest Is Connected To Frame With The Help Of Connectors (Made Of Nylon), Metal Frame Is Foldable , Black Powder Coated Frame., Arm Pad Is Adjustable (Front & Back), Pu Moulded Seat Cushion.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 541 | Model: Potent College DeskSize: 1350Wx400Dx750H mm.providing & supplying college desk the work surface should be 25 mm thick base material 25mm thick laminated particle board 2 mm thick chloride edge banding on straight after outer ages. The modesty panel should be 18 mm thick best material plain particle board post laminated with 0.6 mm laminated on either side 2mm thick chloride edge banding the leg must be made from 1.6 m mat silver anodized aluminium extrusion the wire carrying is facilized trough the hollow space between two leg extrusion and the wire field between removable rigid chloride extrusion in the leg the table support bracket should be powder coated. Table support bracket made from 2 mm thick mild steel sheet provide for all products stability topper should be powder coated copper made from 1.5 mm sink aluminium extrusion fixed with work surface powder coated topper bracket made from 3 mm thick mild steel boot and off aluminium extrusion covered with plastic moulded end cap.The grommet made from plastic moulded component to facilitate access of electrical data voice socket access from top. The switch mounting tray should be powder coated switch mounting tray made from 0.8 mm and 2 mm thick mild steel sheet fitted on. Modesty which cable can be passed switches to be mounted on tray as per requirement powder coated cable tray made from 0.6 mm mild steel sheet put on switch mounting tray for keeping extra length electrical data voice cables, all metal part powder coated to the thickness 50-60 microns (+/-5 micron) epoxy polyester coating to the main plastic caps made of polypropylene are provided on the M.S base. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 542 | HORTICULTURE |
| 543 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 544 | Supplying and stacking at site dump manure from approved source, including carriage up to 1.0 km (manure measured in stacks will be reduced by 8% for payment) |
| 545 | Screened through sieve of IS designation 20 mm |
| 546 | Screened through sieve of IS designation 16 mm |
| 547 | Screened through sieve of IS designation 4.75 mm |
| 548 | Supplying and stacking of well decayed cow dung manure at site including royalty and carriage up to 1.0 km (cow dung manure measured in stacks will reduced by 8% for Payment) |
| 549 | Fine dressing of the ground |
| 550 | Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge |
| 551 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately). |
| 552 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts |
| 553 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) |
| 554 | Holes 1.2 m diameter and 1.2 m deep |
| 555 | Holes 90 cm diameter and 90 cm deep |
| 556 | Holes 60 cm diameter and 60 cm deep |
| 557 | Holes 45 cm diameter and 45 cm deep |
| 558 | MAINTAINANCE WORK |
| 559 | Complete maintenance of the entire garden features having as per yard stick in the gardenarea i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cuttingby lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide &fertilizers (whenever required) top dressing of lawn with good earth and manure andmaintenance of other garden related works as directed by office-in-charge (Cost of GoodEarth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawnmover and brush cutter with fuel and other T & P material/articles shall be provided by thecontractor.) and as per direction of officer in charge. |
| 560 | TREES |
| 561 | Delonix regia |
| 562 | Cassia fistula |
| 563 | Pterospermum acerifolium |
| 564 | Ficus religiosa |
| 565 | Ficus benghalensis |
| 566 | Cestrum nocturnum |
| 567 | Azadirachta Indica |
| 568 | Bauhinia purpurea |
| 569 | Callistemon lanceolatus |
| 570 | Spathodea campanulata |
| 571 | Plumeria alba |
| 572 | Plumeria rubra |
| 573 | Lagerstroemia flosreginae |
| 574 | Polyalthia longifolia |
| 575 | Tectona grandis |
| 576 | Tamarindus indica |
| 577 | Mangifera indica |
| 578 | Eugenia jambolana |
| 579 | Phyllanthus emblica |
| 580 | foxtail palm |
| 581 | Bottle palm |
| 582 | BAMBOO |
| 583 | Buddha belly bamboo |
| 584 | SHRUBS |
| 585 | Clerodendrum inerme |
| 586 | Ficus panda |
| 587 | Ficus benjamina Starlight |
| 588 | Gardenia jasminoides |
| 589 | Golden duranta |
| 590 | Hamelia patens |
| 591 | Hibiscus rosa-sinensis |
| 592 | Raphis excelsa |
| 593 | Tecoma gaudichaudi |
| 594 | TMC dwarf |
| 595 | Canna dwarf |
| 596 | GROUND COVERS |
| 597 | Alternanthera red |
| 598 | Chlorophytum comosum |
| 599 | Jatropha |
| 600 | Sprenger's asparagus |
| 601 | Syngonium podophyllum |
| 602 | Tradescantia pallida |
| 603 | GRASS |
| 604 | Cynodon dactylon |
| 605 | BORE WELL |
| 606 | Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. |
| 607 | (a) From 0.00 M to 50.00 M below G.L. |
| 608 | (b) From 51.0 M to125.00 M |
| 609 | (c) From126.0 M to150.00 M |
| 610 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 611 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 612 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 613 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 614 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 5 HP |
| 615 | Larsen & Toubro 5 HP Starters Control Panel for Submersible PumpLarsen & ToubroR (5 HP) |
| 616 | Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. |
| 617 | Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I. |
| 618 | BUILDING SIGNAGE WORKS |
| 619 | Providing and fixing Signage at terrace level with Laser Cut Acrylic Letters with Stainless Steel sides along with Korean Led Lights, Letters will be fixed over the Structure made. - 40 Feet by 3 Feet |
| 620 | Providing and Fixing Laser Cut 5 mm Acrylic Signage with 5 MM Laser Cut Acrylic letters pasted above in desire color and design fitted with SS Studds - 8 Inch by 24 Inch |
| 621 | Providing and Fixing Laser Cut 5 mm Acrylic Signage with 5 MM Laser Cut Acrylic letters pasted above in desire color and design fitted with SS Studds - 8 Inch by 18 Inch |
| 622 | Providing and Fixing Laser Cut 5 mm Acrylic in desired color with Plotter Cut Vinyl Letter as required fixed by Studds - 2 Feet by 4 Feet |
| 623 | Providing and Fixing Fire Exit Signage - 3M Vinyl self illuminating Reflective Vinyl pasted on 3MM Sun board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender