Tender For Renovation Of Existing Electrical Infrastructure & Additional Accommodation Work Of Bunglow No. 1 At Jal Vihar Colony. ( Re-Invited)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
13400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Existing Electrical Infrastructure & Additional Accommodation Work Of Bunglow No. 1 At Jal Vihar Colony. ( Re-Invited)
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of existing electrical infrastructure & additional accommodation work of Bunglow No. 1 including Servant quarter, Security room & garage etc. at Jal Vihar Colony as per following:- 1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel / PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.10.2 - Group – B. |
| 2 | 1.14.2 Wiring for circuit / sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel / PVC conduit as required. 2x2.5 sq. mm + 1x2.5 sq. mm earth wire. |
| 3 | 1.14.3 Wiring for circuit / sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required. 2x4 sq. mm + 1x4 sq. mm earth wire. |
| 4 | 1.14.5 Wiring for circuit / sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required. 2x10 sq. mm + 1x6 sq. mm earth wire. |
| 5 | 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 6 | 1.34 Supplying and fixing brass batten / angle holder including 8connection etc. as required. |
| 7 | 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 8 | 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door |
| 9 | 2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts 10 kVA ‘C’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. |
| 10 | 2.10.5 Supplying and fixing up to 63 amps rating, 240/415 volts 10 kVA ‘C’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral |
| 11 | 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 12 | 1.44/8 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length upt 30cm with 1.5 Sq. mm FRLS PVC insulated, copper conductor single core etc. as required. |
| 13 | 1.5 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 14 | 1.35 Installation, testing, commissioning of wall bracket / ceiling fittings of all sizes consisting two GLS/CFL/LED lamps per fitting complete will all accessories. |
| 15 | 1.24.6 Providing / fixing of telephone socket outlet. |
| 16 | 1.24.7 Providing / fixing TV Antenna socket outlet. |
| 17 | 1.18.2 Supplying & drawing following pair 0.5mm dia FRLS PVC insulated annealed copper conductor unarmored telephone cable in the existing surface / PVC conduit as required – 2 Pair. |
| 18 | 1.19 Supplying & drawing co-axial TV cable RG-6 grade 0.7mm solid copper conductor PVC shielded with fine tinned copper braid and protected with PVC sheath in the existing surface recessed steel / PVC conduit as required. |
| 19 | 1.38 Supply & fixing of call bell buzzer suitable for single phase 230 volt complete as required. |
| 20 | 1.33 Supplying & fixing 3 pin 5 Amp. Ceiling rose in the existing junction box wooden block i/c connection. |
| 21 | Providing 0.5 HP Pressure booster pump, single phase, 220 Volts size 25mm x 25mm. Make:- Kirloskar / Crompton / OEM. |
| 22 | Providing surface & wall mounted LED type, extruded aluminum housing provided for efficient heat dissipation in poly carbonate diffuser & electronic driver 25 watt, 4’’ size. Make:- Havells / Crompton /Phillips / Bajaj. |
| 23 | Providing of high speed ceiling fan 36” size (900mm) metallic in white shade. Make:- Havells / Crompton / Phillips / Bajaj /Orient. |
| 24 | Providing of high speed fancy ceiling fan 48” size (1200mm) 5 Star rating BLDC type metallic in required shade. Make:- Havells / Crompton / Phillips / Bajaj / Orient / Usha. |
| 25 | Providing of 25 Ltrs. Capacity Geyser power consumption 2000 Watt, 5 Star rating. Make:- Havells / Crompton / Phillips / Bajaj / Orient / Thermoking . |
| 26 | Providing of exhaust fan 12” size high speed metallic. Make:- Havells / Crompton / Phillips / Bajaj. |
| 27 | Providing of wall surface mounted LED fancy light fixture suitable for 30 watt spiral / pins type LED. Make:- Havells / Crompton / Phillips / Bajaj. |
| 28 | Providing of LED bulb (warm white) 15 watt. Make:- Havells / Crompton / Phillips / Bajaj. |
| 29 | Providing of LED bulb (warm white) 7/9 watt. Make:- Havells / Crompton / Phillips / Bajaj. |
| 30 | Providing of LED (COB) down light beautifully designed ascent light with high efficiency heat switch and crisp light warm white throw & high CRI in 18 watt 3000K rating. Make:- Havells / Crompton / Phillips / Bajaj. |
| 31 | Providing of bulk head light for LED wall mounting metallic body 15/20 watt bulb. Make:- Havells / Crompton / Phillips / Bajaj. |
| 32 | Providing & installation of electric chimney wall mounting type having suction capacity 1200-1400 M3 / Hr. 60cm auto clean type. Make:- Glen / Faber / OEM. |
| 33 | Dismantling charges & making good the surface etc. as per both site requirement of work to be carried out. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender