Tender For Civil Maintenance Works In Howrah It Park
Tender Value
6.93 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
7 days left
EMD
7500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil Maintenance Works In Howrah It Park
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Square or hexagonal mesh netting made with 18 B.W.G. galvanisedwire, fitted and fixed complete as per design ( including local sal woodbattens of size 37.5mmx25mm). 19mm mesh |
| 3 | Taking out Mirzapur or glazed porcelain or vitrified/ ceramic tilescarefully by chiselling from walls or floor including stacking serviceablematerial as directed. |
| 4 | Supplying, fitting and fixing 1st quality Ceramic tiles in walls andfloors to match with the existing work & 4 nos. of key stones (10mm)fixed with araldite at the back of each tile & finishing the joints with whitecement mixed with colouring oxide if required to match the colour oftiles including roughening of concrete surface, if necessary or bysynthetic adhesive & grout materials etc.2nd floor: light colour(Johnson/ Kajaria/ Somany) (B) Wall, With Sand Cement Mortar (1:3)15 mm thick & 2 mm thick cement slurry at back side of tiles usingcement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. Area of each tile above 0.09 Sq.m ;Coloured decorative |
| 5 | Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987: 12mm thick cleared toughened glasscoforming to IS: 2553-1992 (Part-II) |
| 6 | Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminiumsections for the following units:- Fully glazed single leaf reamless swingdoor made of anodized aluminium alloy extrusions fabrication aftercutting to proper shape and size, drilling and aligning fitted with heavyduty hydraulic action floor spring with top pin assembly and fitted withinbuilt locking arrangement and all other necessary fittings, fixture,adhesives and joineries, cutting the glass to requisite shape and sizemounting the edges for fitting the same with dry set neoprine/EPDMgasket. |
| 7 | Supply & applying Weather Silicone sealant of approved make andbrand for fixing of grove line between the Glasses as per direction ofEngineer-incharge. for Structural Glazing/Curtain wall complete in allrespect with labour, material, hanging arrangement etcWeather Silicone sealant for filling the Grove line between Glasses orany other material for facial work |
| 8 | Hydraulic door closer of approved quality as per I.S.I. standard fittedand fixed complete. Heavy type (I.S.I. size 3) |
| 9 | Labour for taking out rolling shutter (only shutter portion) dismantlingby parts for repair or (replacement of damaged parts only), rehangingand refitting the same in position after necessary repairs (excluding thecost of supply of new parts). |
| 10 | Oiling and greasing of rolling shutter and repair to inside lock. |
| 11 | Renewing spring of rolling shutter as per existing size and shapeincluding fitting fixing complete. |
| 12 | Supplying and laying true to line and level vitrified tiles of approvedbrand (size not less than 600 mm X 600 mm X 10 mm thick) in floor,skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thickcement slurry back side of tiles using cement @ 2.91Kg./sqM or usingpolymerised adhesive (6 mm thick layer applied directly over finishedartificial stone floor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM below mortar only,joints grouted with admixture of white cement and colouring pigment tomatch with colour of tiles / epoxy grout materials of approved make asdirected and removal of wax coating of top surface of tiles with warmwater and polishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all other incidentalcharges complete true to the manufacturer's specification and directionof Engineer-in-Charge. (White cement, synthetic adhesive and groutmaterial to be supplied by the contractor, With application slurry @1.75kg/ Sq.m, 20 mm sand; Deep Colour & White |
| 13 | Supplying fitting and fixing P.V.C. door shutter of approved quality &shade in position, the style & rail of the P.V.C. door shutter will be madeof rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm sectionwith 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical sectionshall be fixed to each other by self tapping screws and 1 solid polymericor M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in eachcorner of the shutter frame for placing hinges. Polymer basedmulticavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm)wall thickness will be fitted in the middle, reinforced by solid polymer barof 200 mm long at both ends and screws from both sides as lock rail.The section frame will then be fitted in by PVC panels of size 100mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6mm dia bright rod will be inserted horizontally with both side check andnut system and stretches where fixing of hinges / hasp bolt / tower bolt /door ring are required to be strong enough to with stand wear and tear.The rate is inclusive of cost of all materials, labour, and hire of tools andplants and appliancesi/c carriage of all materials taxes and all otherincidental charges complete. In ground floor. PVC door shutter 30 mmthick |
| 14 | Extra rate over item no 12, 1st floor |
| 15 | Extra rate over item no 12, 2nd floor |
| 16 | Extra rate over item no 12, 3rd floor |
| 17 | Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface, if necessary Onsteel or other metal surface :; With other than hi-gloss of approvedquality; Two coats (with any shade except white) |
| 18 | Painting with ready mixed red lead paint of approved make and brand: 2 coats |
| 19 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges,600 mm X 450 mm |
| 20 | Godrej Hydraulic door closer fitted and fixed complete. Heavy type |
| 21 | Labour for taking out door and window frame including shutter forrepair or replacement of different parts of the frame & refixing the sameincluding mending good all damaes complete. Area uoto 2.5 sqm |
| 22 | Door stopper (Anodised aluminium) fitted and fixed complete |
| 23 | Exposed False-ceiling Work Supplying, fitting & fixing High Pressuresteam Cured Non Asbestos fibre cement standard ceiling board(Density > 1300Kg per Cu.m. ) of size595mm X595mm conforming IS14862 and type B, catagory III of ISO 8336, tested as per AS-1530; Part3 and BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module toform a false ceiling all complete as per drawing & direction of Engineer -in- Charge. False ceiling with 4mm thick Fibre Cement Standard ceilingboard |
| 24 | Supplying heavy duty top pin/set of pivots of local make and approved |
| 25 | Taking out shutter of door and window, dismantling by parts (for repairor replacement of damaged parts) , reassembling and refitting andrehanging same with old fittings but with new screws as necessary. |
| 26 | Supplying heavy duty hydraulic double action floor spring along withtop pin/set of pivots conforming to IS: 6315 or any approved make asper direction of Engineer in charge fitted and fixed complete |
| 27 | Supplying & fixing Brass Self closing cock for water cooler |
| 28 | Supply and fixing 4 Lever Narrow Stile Mortise Lock (Godrej) |
| 29 | Dismantling all types of masonry excepting cement concrete plain orreinforced, stacking serviceable materials at site and removing rubbishas directed within a lead of 75 m., In ground floor including roof. |
| 30 | Dismantling all types of plain cement concrete works, stackingserviceable materials at site and removing rubbish as directed within alead of 75 m., In ground floor including roof. Upto 150 mm thick |
| 31 | Brick work 1st class bricks in cement mortar (1:4), (a), foundation andplinth |
| 32 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. i) Pakur Variety |
| 33 | Providing and fixing exterior quality Aluminium Composite Panel(ACP) wall cladding on existing Al. /MS frame work with GI brackets,ACP fixed on the existing frame work by folding the edges of ACP panel(Engraving the rear surface of ACP sheet) with CP angles, cleats andstrainless Steel screws forming groves at the periphery of ACP panel.Such grooves filled with foam and silicon sealant etc. complete with allmaterials (but including the cost of silicon sealant), labour, scaffoldingand all other incidental charges complete in all respect as perspecification and direction of Engineer-in-charge. (Mode of payment ison finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mmLDPE +0.50mm Al. PVDF coating) |
| 34 | Removal of solid waste (mixed type) by truck and dumped indesignated dumping yard specified by local authorities in conformity toMunicipal laws. The solid waste material to be loaded onto truck bymechanical/ manual means maintaining all safety precautions |
| 35 | Renewing bottom curved rail of M.S. flat with necessary clamps underthe curved M.S.flats and fixing them after cutting holes with cementconcrete (1:2:4) with stone chips and mending good damages to runsmooth the heavy iron gated door or G.C.I. Sheet door or gate. 50mmx 6 mm M.S. flat |
| 36 | Renewing W.I. or M.S. wheel or roller of steel door or gate fitted andfixed with neceessary clamps and nuts and bolts and erected complete.Above 50 mm. |
| 37 | M.S.gate of Jail type as per approved design made of strong M.S.frame work, intermediate stiffeners and round / square bars or angles.M.S. sheet (not less than 14 gauge) gussets, cleats etc. includingnecessary riveting, bolting, welding, locking and hangingarrangements, fitting and fixing complete, upto 3rd floor |
| 38 | Supplying fitting and fixing door frame with M.S. angle as per drawing& direction of required section.The holes for counter sunk machinescrew & nuts will be such as to fit 8 to 10mm Iron screw.The countersunk nut to be welded. The nuts are to be welded after carefulchecking with screw.All welding spots should be properly filed orrounded smooth including cost of welding hinges for hing ecleats , lugsfor haspbolt, socketbolt etc. and necessary M.S. clampsof 25mmx6mmflat 225mm long as per direction welded to the frame fittedand fixed inposition including cost of concrete. at all floor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender