Tender For Special Repair To Bldg No P-05 At Seklu And T-70 At 1/3 Ci Det Ncib And Provn Of Septic Tank And Sokage Well At Ap-253 At Poonch Under Age B/R-Ii Of Ge 881 Ews.
Tender Value
44.98 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
21 days left
EMD
89960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-05 At Seklu And T-70 At 1/3 Ci Det Ncib And Provn Of Septic Tank And Sokage Well At Ap-253 At Poonch Under Age B/R-Ii Of Ge 881 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: SPL REPAIR TO BLDG NO P-05 AT SEKLU AND T-70 AT 1/3 CI DET NCIB AND PROVN OF SEPTIC TANK AND SOKAGE WELL AT AP-253 AT POONCH UNDER AGE B/R-II OF GE 881 EWS. Contract No : GE/PNH-49/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B&R Portion:- Taking down cement plaster from stone/brick walls including raking out joints for keys and scrubbing down with water etc, complete all as specified and directed. |
| 3 | M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in double storey building etc complete all as specified and directed by Engineer-in-Charge |
| 4 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed finished even and smooth (without using extra cement) on wall upto double storey buildings etc complete all as specified. |
| 5 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 mixed finished even and smooth (without using extra cement) on wall upto double storey buildings etc complete all as specified. |
| 6 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in painting with combination of five colours on walls complete all as specified and as directed. |
| 7 | Material & Labour for complete removing of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces in painting with combination of five colours on walls complete all as specified and as directed. |
| 8 | M&L for Preparing New plastered or unplastered surfaces of walls and applying Two coat of distemper oil emulsion complete all as specified. |
| 9 | M&L for complete removing of existing treatment and preparing plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion complete all as specified. |
| 10 | M & L for preparation of new plastered surface and applying three coats of white wash on ceiling surfaces complete all as directed. |
| 11 | M & L for preparation of old plastered surface and applying two coats of white wash on ceiling surfaces complete all as directed. |
| 12 | Preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over a coats of pink primer all as specified and directed. |
| 13 | M & L for two coats of synthetic enamel paint over and including a coat of Red oxide primer on steel surfaces n.exc 10 cm in width or girth including preparation of new or previously untreated surfaces of steel surface complete all as specified. |
| 14 | M & L for one coat of synthetic enamel paint over 10 cm in width or girth including preparation of old painted steel surfaces complete all as specified. |
| 15 | Demolition of Brick work built in CM including all quoins, arches, pillars,etc complete all as specified. |
| 16 | M/L brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in CM 1:6 complete all as specified & directed. |
| 17 | Demolition of cement concrete (unreinforced) as in ground floor and pavings n.exc 15cm thickness below or above ground level all as specified. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the all as specified and directed |
| 19 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar |
| 20 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:4 complete |
| 21 | Ditto item No 19 above but as in vertical surface including a back coat in CM 1:3 |
| 22 | Floor grinding and polishing granite finish to existing kota stone floors including necessary repairs if required after each cutting ie filling of joints with white cement and pigments to the entire satisfaction of GE |
| 23 | Ditto all as per item No 21 but in vertical surface. |
| 24 | M&L 16-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 25 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified. |
| 26 | S&F for Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including10mm thick backing coat in CM 1:3 complete all as specified. |
| 27 | M&L 25 mm thick PCC 1:2:4, type B-0 using 12.50mm graded crushed aggregates as in levelling course to floor surface complete all as sfecified and directed. |
| 28 | M&L for 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection including forming and filling of joints with bituminous filler complete all as directed. |
| 29 | M&L 25mm thick of 30cmx30cm chequered cement concrete tiles, set and jointed in neat cement slurry including 20mm thick screed bed and pointed in white or coluured cement mixed with mixture of pigments to match with the colour of tiles all as specified and as directed. |
| 30 | Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames). |
| 31 | Taking down Chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frames). |
| 32 | Taking down shutters of any description exc 2.0 sqm each complete all as specified and directed. |
| 33 | M&L Pressed steel frames 125x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:2:4 type B1 as in anchoring hold fast complete, as specified and directed. |
| 34 | M&L Pressed steel frames 105x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:2:4 type B1 as in anchoring hold fast complete, as specified and directed. |
| 35 | M&L 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneersa all as specified and directed. |
| 36 | M&L for 2nd class hard wood, 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified. |
| 37 | Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening complete all as specified. |
| 38 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame complete all as specified and directed. |
| 39 | 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed. |
| 40 | 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 41 | 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 42 | 150 mm long aluminium handles, cast type, anodised and fixed. |
| 43 | 100 mm long aluminium handles, cast type, anodised and fixed. |
| 44 | 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 45 | 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 46 | S&F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified. |
| 47 | S&F Steel windows with side hung shutters with combination of glazed and gauzed shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 48 | S&F Sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or wooden beads, in square n exc. 0.5 Sq.m pane, complte all as specified. |
| 49 | S&F in repairs sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or wooden beads, in square n exc. 0.5 Sq.m pane, including hacking out old broken glass complete all as specified. |
| 50 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified. |
| 51 | S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified. |
| 52 | S&F fixed in repairs squatting pan of size 580 x 440 mm white, with integral foot rests including connection to trap, flushing cistern and flushing pipe, anti-syphonage pipe, etc. complete including 100 mm dia ‘S’ trap set in and including concrete making good to including jointing to existing pipe of floor of size 100mm complete all as specified and as directed. |
| 53 | S&F Vitreous china wash down water closet (Pedestal pattern) white with seat cover with all fittings including connection to drain and to flushing pipe , anti syphonage pipe etc fixed in repair complete all as specified and directed. |
| 54 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 55 | Supply & fixed in repair, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified. |
| 56 | Supply & fixed in repair, Vitreous china wash basin, counter type oval shape size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified. |
| 57 | S&F Brass CP basin mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 58 | Supply & fixed in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified. |
| 59 | Supply & fixed in repairs Angle cock (ISI Marked), cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed in repair complete all as specified. |
| 60 | S&F for 20mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed for urinal complete all as specified. |
| 61 | S&F in repair Bib tap 15 mm bore, Brass CP, fancy type (long shank) with capston head screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified. |
| 62 | Supply & fixed in repairs PVC connection 15 mm bore with CP nuts of length 600 mm long complete all as specified. |
| 63 | Supply & fixed in repairs grating doom 100 mm dia with waste hole of PTMT (minimum weight - 40 gms). complete all as specified |
| 64 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated screws and cup washers complete all as specified. |
| 65 | S&F in repair chromium plated over head shower rose 125mm single flow self cleaning type with arm and fixing to pipe complete all as specified. |
| 66 | S&F soap dish with matt chrome finish CP brass screws and cleats etc complete all as specified. |
| 67 | S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 68 | S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with screws and cleats etc complete all as specified. |
| 69 | Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches, if required any dia all as specified |
| 70 | M & L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 71 | S & F for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in in floor complete all as specified |
| 72 | S & F for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified |
| 73 | S & F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors complete all as specified |
| 74 | S & F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified |
| 75 | S & F for PVC (SWR) bends 75mm bore all as specified and directed |
| 76 | S & F for PVC (SWR) bends 110mm bore |
| 77 | S & F for PVC (SWR) branch piece, single (single Y) equal or unequal 75mm bore |
| 78 | S & F for PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore |
| 79 | S & F for PVC (SWR) junction single, (Single T) equal or unequal 75mm bore |
| 80 | S & F for PVC (SWR) junction single, (Single T) equal or unequal 110mm bore |
| 81 | S & F for PVC (SWR) vent cowl 75mm bore complete all as specified |
| 82 | Dismantling water tanks of any description, exc 500 & n exc 1000 litre capacity and removing from site. |
| 83 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity, all as specified in SSR Part-I. |
| 84 | S&F Ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed of 20 mm bore dia complete all as specified. |
| 85 | Supply & fixed in repairs Gate Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed in repair complete all as specified. |
| 86 | Supply only lequid water proofing compound of Dr fixit or equivalent make complete all as specified. |
| 87 | Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth and using water proofing compound @ 3% on sunken portion complete all as specified and directed (NOTE : Water proofing compound shall be measured and paid separately under relevant item of this Schedule 'A',). |
| 88 | Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 Cum per sqm surfaces and applying hot blown bitumen 85/25 on sunkn portion all as specification all as specified |
| 89 | Polythene film 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50kg per sq. m complete all as specified and directed. |
| 90 | M & L for loose filling of brick bats 80 to 150 mm in sunkn portion complete all as specified. |
| 91 | Taking up or down steel tubing 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 92 | Taking up or down steel tubing 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 93 | S&F 20mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 94 | S&F 25mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 95 | M&L for GI tubing 25mm bore pipe medium grade and connection incl dismantling complete all as specified. |
| 96 | Taking down existing tarfelt including tiles and Demolition of concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 1.50 km and n. exc. 5.0 km incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. |
| 97 | Water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment /specification including ponding test as specified:- |
| 98 | M&L for PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and finishing surface smooth and even to maintain levelling to existing slab complete all as specified and directed. |
| 99 | M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) on roof slab icluding parapet and including mixing of liquid water proofing compound @ 200 ml per 50 kg of cement bag complete all as specified and as directed. |
| 100 | Applying bitumenous primer conforming to IS-3384 @ 0.3 ltrs per Sqm over plastered surfaces of roof slab including parapet surface. |
| 101 | Applying a coat of hot blown VG-20 paving grade (60-80 panetration) bitumen conforming to IS-3384 @ 1.20 kgs per Sqm over priming surfaces of roof slab including parapet surface. |
| 102 | Providing a layer of APP based polymembric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen with torch application method including end operlaps not less than 150mm and side lap 75mm, membrane shall be five layered with centre core as 90 microns high density polyethylene film, minimum weight of membrane shall be 3.60 Kgs/Sqm, overlap shall be sealed with suitable adhesive as per manufacturer's instructions, polymetic membrane shall be taken to a height of 60cm(min) and inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specified and directed. |
| 103 | Applying a coat of hot blown VG-20 paving grade (60-80 panetration) bitumen conforming to IS-3384 @ 1.2 kgs per Sqm over APP membrane and blinded with dry fine sand @ 0.50 kg/sqm dusted over bituemn complete all as specified and directed. |
| 104 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 105 | Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets. |
| 106 | S&F 18/19mm HDMR board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with headless nails screws to timber frame work incl beading with polishing complete all as specified.(Make: Action Tesa, Green Panel, Century) |
| 107 | S&F 6mm thick Plywood, termite proof and water boiling proof plywood best quality, type BB, fixed with headless nails screws to timber frame complete all as specified |
| 108 | M&L for Decorative laminate (sunmica) 0.9 mm type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions |
| 109 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm |
| 110 | S&F 100mm brass handles, cast type, polished bright fixed to wooden shutters complete all as specified. |
| 111 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises. |
| 112 | Demolition of cement concrete (unreinforced) as in ground floor and pavings n.exc 15cm thickness below or above ground level all as specified. |
| 113 | 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection and PCC path finished even and smooth with out using extra cement including forming and filling of joints with bituminous filler all as directed at site. |
| 114 | Non - skid joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured/printed/digital area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15 mm thick cement screed bed in 1:4 all as specified and directed. |
| 115 | 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregates) as in levelling course to receive floor finishes all as specified and directed. |
| 116 | Dismentling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 117 | 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275. including dismantling of roof sheeting of any description all as specified and directed. |
| 118 | 0.63mm Plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings fixed with L-type or J-type or cranked hook bolts including dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 119 | Two coats of synthetic enamel paint on steel surface over a coat of primer including prepartion of new/old surfaces on surfaces of any description and position all as specified and directed. |
| 120 | Dismantling of wall and ceiling boards any thickness including cover cover fillets complete all as specified and directed. |
| 121 | S&F Anodised aluminium snap grid size of grid 605 x 605mm frame work for false ceiling and Hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screwsall as specified complete all as specified and directed. Make:- Everest Industries Ltd or equivalent. |
| 122 | S&F for 5-6mm thick hollow insulated PVC coloured wall panelling including lining and necessary cleats, screws, bedding etc complete fixed to wall in repair all as specified and directed. |
| 123 | Material & Labour for applying one or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surfaces including preparation of old surfaces all as specified and directed. |
| 124 | Taking down shutters of any description exc 1 sqm but n exc 2 sq. m each |
| 125 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 126 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, mortise lock, 5.5mm tinted glass/12 mm thick coloured PVC sheet, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 127 | Anodised aluminium for partition fixed portion with extruded builtup standard tubular section/appropriate Z sections and other sections of approved makes conforming to IS:733 and IS:1285, fixing with fasteners of required dia and size including 5.5mm tinted glass complete and necessary filling up the gap at junctions i.e at top, bottom and sides with required EPDM rubber / neoprene gaskwr etc. Aluminium section shall be smooth , rust free, straight, mitred and jointed mechanically where required including cleats angle. Aluminium snap beading for glazing/panelling CP brass/stainless screws all complete as per architectural drawings and the direction of Engineer-in-Charge. |
| 128 | S&F 30 mm thick Flush shutters, solid core, construction, with block board core and plywood face panels, commercial type on both sides with particle board core all as specified and as directed. |
| 129 | M&L 2nd class hard wood, 30 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and rebated sash bars, any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or rounded, fitted with cut and mitered beads for securing glass etc. size of members as specified in SSR Part I clause 8.24 (b) kiln seasoned and chemically pressure treated complete, all as specified. |
| 130 | Decorative laminate type 1 of surface finish sun mica, colour and pattern as approved in both faces, fixed with approved adhesive as per manufacturer's instructions |
| 131 | S&F 300mm long alluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or xtruded section and fixing bolts and sliding of extruded section. |
| 132 | S&F for 150mm size MS door handles.complete all as specified and as directed. |
| 133 | S&F for 150mm long MS barrel tower bolts complete all as specified and as directed. |
| 134 | S&F for 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed. |
| 135 | S&F for 300 mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete. |
| 136 | S&F in repairs sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or wooden beads, in square n exc. 0.5 Sq.m each pane, complete all as specified. |
| 137 | S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed |
| 138 | M&L for 100 mm thick PCC 1:4:8 using 20mm graded aggregate type B-1 (Nominal mix) as in sub base complete all as specified and directed. |
| 139 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified. |
| 140 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified. |
| 141 | Sand cushioning under interlocking paver block complete all as specified. |
| 142 | M&L for PCC 1:2:4, type B1 as in coping, benching complete all as specified. |
| 143 | Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth and not exceeding 10 sqm on plan and getting out hard/dense soil complete all as specified. |
| 144 | Cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete compllete all as specified and directed. |
| 145 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 146 | Concrete bed to drain pipes of 150 mm internal dia, including packing under, and haunching against the sides of pipes after they atre laid and tested; in plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregates complete all as specified and directed. |
| 147 | 150 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with GI/Alu clamps fixed in repair all as specified and directed. |
| 148 | Returning, filing including spreading leveling watering and well ramming in layes not exc 25 cm thick in any type of soil complete all as directed. |
| 149 | Removing excavating material (soil) n. exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 150 | PCC 1:2;4 type B-1 using 20 mm graded crushed stone aggregates, as in coping bed plates, benching water trought and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 151 | Rendering 15 mm thick in CM 1:4 on fair face of brick work surfaces finished even and smooth without using extra cement including mixing of water proofing admixture all as specified and directed. Note: water proofing admixture shall be measured and paid separately as supply only under relevant item. |
| 152 | Supply only liquid water proofing compound @ 0.200 ltr per 50 kg of cement or as per manufacture's instruction complete all as specified and directed. |
| 153 | Mild steel TMT bars 10 mm dia and over quality conforming to Grade 500D/550D cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia. |
| 154 | Providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) set in cement mortar 1:4 as in hoods, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 155 | Construction of soakage well 3.0 mtr dia and 3.0 mtr deep below inlet (depth) from inlet pipe to ground level 45 cm, including excavation and earth work in any type of soil, PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) in foundation, wall in honey combed brick work in CM 1:4, cover slabg of M-25 (Design mix), filling with brick bats, earth cushion on brick lining on top and inlet pipe 150mm dia, complete all as specified and directed. |
| 156 | On site incl installation of LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 25 users all asspecified |
| 157 | E&M Portion :-Taking down carefully unserviceable copper/aluminium point wiring including all fittings and making good to disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed. |
| 158 | Taking down unserviceable sub main wiring including earth continuity any type / size and making good to disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 159 | M&L for Point wiring with 2 x 1.5 sqmm (as phase and neutral) and 1 x 1.5 sqmm (as earth continuity conductor) multistranded copper conductor cable connected to common earth dolly,1100 volts grade , FRLS, PVC insulated and including PVC casing capping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete for the followings:- |
| 160 | One light / fan point controlled by one switch |
| 161 | One 5 pin, 6 A socket outlet on the same board |
| 162 | One 5 pin, 6 A socket outlet on the independent board. |
| 163 | One light point controlled by two numbers two way switches |
| 164 | All as per item No. 157 above but for 2 x 2.5 sqmm (as phase and neutral) and 1 x 1.5 sqmm (as earth continuity conductor) for one 15 Amps socket outlet on independent board. |
| 165 | All as per item No 157 here-in-before but with two 4sqmm size cables as phase and neutral and one 4 sqmm size cable as earth continuity conductor for one 16/20 Amps socket outlet independent -ditto- |
| 166 | S&F ceiling rose, 3 terminal, surface bakelite 65 x 50mm complete all as specified and as directed. |
| 167 | S&F Piano type switch, 1 way,6 Amps, flush type, all as specified and as directed. |
| 168 | S&F Piano type switch, 2 way, 6 Amps, flush type, all as specified and as directed. |
| 169 | S&F socket outlet 2 in 1,5 pin ,6 Amps, flush type all as specified and as directed. |
| 170 | S&F Switch socket combination 5 pin, 6 Amps, flush type all as specified and as directed. |
| 171 | S&F Switch socket combination 2 in 1, 5 pin and 15 Amps, flush type all as specified and as directed. |
| 172 | S&F Lamp holder insulated body all as specified and as directed. |
| 173 | S&F Inverter type LED Lamp, 12 watt, all as specified and as directed. |
| 174 | S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed. |
| 175 | S&F Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours and connecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as directed. |
| 176 | S&F LED tube light fittings mirror type with high out put diffuser 2 feet , 10 watt 220 volt AC decorative box type with driver and connecting up with three core flexible copper conducor cable of suitable size from ceiling rose complete. |
| 177 | S&F in repair building security light fittings, 35 watt LED, 230V, AC out door type pre-wired, IP-65/66 protection, with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket complete all as directed. |
| 178 | M&L in repair incl taking out old unsv ceiling fan from site of capacity 1200/1400 mm sweep and replacement with and incl new BLDC ceiling fan of 1200 mm sweep, 230 V, 50 hz incl all connecting accessories complete all as directed by engineer-in-charge. |
| 179 | S&F in repair Vertical TPN DB sheet metal enclosure double door (IP-43), 4 Ways, built- in bus bars complete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed. |
| 180 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified. |
| 181 | S&F Plug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 20 Amps MCB SP complete as specified and directed |
| 182 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers incl all connecting accessories complete and as directed by Engineer-in-charge. |
| 183 | S&F in repair Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 184 | S&F MCCB, TPN,415 volts, breaking capacity 10 KA, rating 25 to 100 Amps, complete all as specified and as directed. |
| 185 | S&F MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed. |
| 186 | S&F in repair MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed. |
| 187 | M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 188 | M&L submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade of size 6 Sqmm and one single core 4 Sqmm as earth continuity conductor drawn into PVC casing capping complete all as specified and directed. NOTE: (i) Two run of 6 Sqmm and one run of 4 Sqmm copper cable incl casing caping shall be measured as one length. |
| 189 | Supply and laying in trenches/on floor/pole or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25 Sqmm 4 core including taking down old/ unsv cable any type complete all as specified and directed. |
| 190 | S&F in repair ceiling mounting LED light fittings luminaire 600mmx600mm,35/36 watt, 220 v, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size. |
| 191 | S&F in repair building security light fittings, 35 watt LED,230v, AC out door type pre-wired, IP-65/66 protection, with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket complete all as directed. |
| 192 | S&F in repair Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 193 | Supply and laying in trenches/on floor/pole or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 10 Sqmm 2 core including taking down old/ unsv cable any type complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender