Tender For Addition Alteration To Bldg No P-254 At Sgnr Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2026
19 days left
EMD
78300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Bldg No P-254 At Sgnr Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed. |
| 2 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified and directed. |
| 4 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed. |
| 5 | Demolition of RCC of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 6 | M & L for Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed. |
| 7 | M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in CM 1:6 etc complete all as specified and directed. |
| 8 | M&L for rendering 10 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick in cement mortar 1:4 (10mm thick rendering in first layer and 5 mm thick rendering in second layer)on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.Note : - Supply only water proofing compound shall be measured and paid for separately. |
| 10 | Supply only integral water proofing compound, ISI Marked complete all as specified and directed. |
| 11 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L for prepration of New plastered Internal wall surface complete applying the following :-(a) Applying 1.5 to 2.0 mm thick wall care putty on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b) Applying one coat of internal Wall Primer by using Roller complete all as specified(c) Applying two coat of Interior Acrylic Emulsion using Roller complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 13 | M&L for prepration of New plastered External wall surface complete applying the following :-(a) Applying 1.5 to 2.0mm thick wall care putty on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b) Applying one coat of Exterior Wall Primer by using Roller complete all as specified(c) Applying two coat of Exterior Acrylic Emulsion using Roller complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 14 | M&L for prepration of New plastered ceiling surface complete applying the following :-(a) M&L 1.5 mm wall care putty in two coats on ceiling surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified.(b) M&L two coat of interior acrylic emulsion over a coat of primer by using Airless spray / Roller over complete all as specified and directed. |
| 15 | M & L for RCC M-30 (Design Mix), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed. |
| 16 | M & L for RCC M-30 (Design Mix), as in columns, pillars, piers, posts, struts and the like complete all as specified and directed. |
| 17 | M & L for RCC M-30 (Design Mix), as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. |
| 18 | M & L for RCC M-30 (Design Mix), Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified and directed. |
| 19 | M & L for use and waste of form work to soffits to sides and soffits offloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, complete all as specified and directed. |
| 20 | M & L for use and waste of form work to soffits of suspended slabs such as in roof slabs landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed. |
| 21 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 22 | M & L for mild CRS steel bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 23 | M & L for mild CRS steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. Please Enable Macros to View BoQ information |
| 24 | M & L for mild CRS steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender