Tender For Repair To Perimeter Fencing And Path Etc At Afs Sonegaon.
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
19 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Perimeter Fencing And Path Etc At Afs Sonegaon.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (woods, steel or RCC) any section including taking out embedded portion in concrete/ brick work masonry etc and making good disturbed ground complete all as specified and directed. |
| 2 | Dismantling of chain link fencing wire mesh or barbed wire any type as directed by Engineer in charge. |
| 3 | S & F in repair galvanised stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire staples or steel pins etc complete all as specified and directed.Note: - Each line of wire to be measured separately. |
| 4 | Restraining resecuruing including making good staples etc of galvanised stand steel barbed wire of any type complete all as specified and directed by Engineer in charge |
| 5 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete as specified and as directed.Note: - Chain link fencing, nut bolts and line wires shall be measured separately. |
| 6 | Supply only mild steel galvanised Chain link fencing, not less than 3mm dia any size or type complete all as specified and directed. |
| 7 | S & F 10 mm dia and over mild steel round bars in chain link fencing complete all as specified and directed. |
| 8 | S & F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 9 | S & F Mild Steel screw bolts of dia 11-15 mm (machine made) with hexagonal or square at one end and screwed with other end or screwed both ends length of bolt n exc 5cm long complete all as specified and directed. |
| 10 | M & L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M & L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 12 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed. |
| 13 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. |
| 14 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius using old bricks obtained from demolition built in CM (1:4) complete all as specified and directed. |
| 15 | M & L for cement concrete (1:3:6) Type C1 using 20mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth with using extra cement complete all as specified and as directed. |
| 16 | M & L for PCC (1:2:4) Type B-0 (using 12.5mm graded stone aggregate) as in coping, benching of manholes, blocks for fixing of rungs and similar works including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed. |
| 17 | Taking down cement plaster on brick walls or stone walls, ceiling etc including racking out of joints hacking for key scrubbing down with water and disposal of rubbish outside the MOD land complete all as specified and directed. |
| 18 | M & L for 15 mm thick rendering on walls surfaces in cement mortar (1:4) on fair faces of brick work, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Demolition of stone slabs and chequered floor tiles of any description or thickness in floors aprons etc laid dry and pointed and removing debris out side MOD land complete all as specified and directed. |
| 20 | M & L for Machine pressed precast concrete interlocking/plain paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade approved design and colour laid over 40mm thick layer of sand cushion complete all as specified and directed.Note: - Rate inclusive of sand cushioning. |
| 21 | Demolition of stone slabs and chequered floor tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar and removing debris outside MD land complete all as specified and directed. |
| 22 | M & L for chequered cement concrete tiles of size 30cm x30cm and 25mm thick jointed and pointed in neat cement slurry with grey cement and pigment to match the shade over and including 20mm screed bed in CM (1:4) complete all as specified and directed. |
| 23 | M & L for 75mm thick PCC (1:3:6) Type C2 using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 24 | M & L for 100mm thick PCC (1:2:4) Type B1 (using 20mm graded stone aggregate) as in floor finished even and fair complete all as specified and directed. |
| 25 | M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘B’ complete all as specified and directed. |
| 26 | Demolition of cement concrete in ground floor n. exc 15cm thickness (below or above ground level) and removing the demolished material and debris outside MD land complete all as specified and directed. |
| 27 | M & L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 28 | S & F GRC Jalli not less than 15mm thick fixed in position, pattern as approved. Glass fibre (AR) min 2%, flexural strength not less than 6 Mpa, compressive strength minimum 35 Mpa design, pattern and colour as approved by Engr-in-Charge including Taking down old complete all as specified and directed. |
| 29 | Demolition of RCC of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 30 | M & L for Providing precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregate) for landings, cover slabs (for Drains.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4. Side frame as required to set the covers will be approved along-with covers. Precast cover from approved manufacturer with provision of handling and holes for water seeping complete all as specified and directed. |
| 31 | M & L for mild steel TMT bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender