Tender for Addition Alteration to Toilet and Bathroom Near Existing Bldg no T-3 at 14 inf div pro Unit Under ge Clement Town.
Tender Value
9.69 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
19 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition Alteration to Toilet and Bathroom Near Existing Bldg no T-3 at 14 inf div pro Unit Under ge Clement Town.
BOQ
| Sl. No. | Item Description |
| 1 | M&L Point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases , making surface good etc along with contineous earth wire 1.5 Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories complete all as specified & directed for the following:-(a) One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 5/6 Amp. |
| 2 | All as per Item No 1 above but on the same board with other switches/sockets |
| 3 | All as per Item No 1 above but for One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, 01-way modular type switch single pole 5/6 Amps. |
| 4 | M&L Point wiring with 2.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases and making surface good etc along with contineous earth wire 2.5Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories (a) one three pin 15 Amps Switch Socket outlet on independent board |
| 5 | Supply and fixing modular switch type 1 way 06 Amp, 1 Module, 240 Volts AC , |
| 6 | Supply and fixing modular switch type 1 way 16 Amp, 1 Module, 240 Volts AC. |
| 7 | Supply and fixing modular socket 06 Amp 3 pin combined, 2 module all as specified. |
| 8 | Supply and fixing modular socket 06/16 Amp combined, 2 module all as specified. |
| 9 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed |
| 10 | Supply and fixing batton holder ISI Marked mounted on wall including 09 Watt LED Bulb all as specified and directed. |
| 11 | S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed. |
| 12 | M & L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 13 | Supply, fabricated and and fixing of street light bracket made out of GI pipe 1.0 Mtr long, 32 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed. |
| 14 | S& F double door sheet metal enclosure for DB , 8way , SPN, with 200 Amps rated bus bar , 240 Volts suitable for housing MCBs and flushed inside the wall and making good for disturbed surface with existing etc complete all as specified & directed. |
| 15 | Supply and fixing MCB SP AC 240 volts of 6 to 32 Amps capacity 10 KA, 'B' series and making connections with suitable size of copper lugs complete all as specified and directed . |
| 16 | Supply and fixing MCB SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified. |
| 17 | Supply & fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete with all fittings all as specified. |
| 18 | Supply and fix electric water heater storage type ABS body with glass lined inner tank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve thermostate, NRV connection piece including taking down old water heater storage type from existing building and deposit to MES Store including all as specified and directed. |
| 19 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by GI wire 4 mm as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 20 | Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade , cross - sectional area of 10 sqmm 2 core complete all as specified & as directed. |
| 21 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out cables, pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge. |
| 22 | M & L for fine dry sand cushioning for underground cable by providing layers of sand 8 cm before laying and 15 cm deep after laying the cable including streching the cable ( measurement to be taken after punning down consolidated thick ness ). complete all as specified and as directed . |
| 23 | Supply and laying , un-reinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmX 150mmX40mm with breaking load capacity 200 KG complete all as specified & as directed. |
| 24 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge. |
| 25 | Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engr - in - Charge. |
| 26 | M & L for 40 mm bore GI pipe (medium grade) laid under road or fixed with pole/wall of culvert as in protection of UG cable incl necessary MS clamp and complete all as specified and directed. |
| 27 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1.0”) dia complete all as specified and directed.( Note:- Rate include cost of laying, excavation, jointing etc |
| 28 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 29 | Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc. |
| 30 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 32 | Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out for any type of soil complete all as specified and directed |
| 33 | M&L Cement concrete 1:4:8 type D2 (using 40mm graded aggregate) as in foundations or mass concrete complete all as specified and as directed. |
| 34 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed |
| 35 | M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed |
| 36 | M&L for returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed |
| 37 | M&L for removing excavated material (Soils) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed |
| 38 | Material and labour for 75 mm thick plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge. |
| 39 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick grade-4 (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm (400x400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed |
| 40 | M&L for coloured Glazed ceramic tiles in vertical surfaces 300x450x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and directed |
| 41 | M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 42 | M&L for Non Skid coloured ceramic tiles 8-9mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles complete all as specified and as directed by Engr-in-charge. |
| 43 | M&L for Machine cut Kota stone slab flooring 16-20 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing complete, all as specified and as directed. |
| 44 | M&L for Kota stone slab 16-20 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 45 | Material and labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified . |
| 46 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement complete all as specified |
| 47 | M&L for preparation of newly plastered surface of wall and applying two coats of internal acrylic distemper including a coat of primer of approved tint over 1mm thick wall care putty complete all as specified and directed |
| 48 | M&L for applying two coat of internal acrylic distemper of approved tint over 1mm thick wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed |
| 49 | M&L for applying two coats of acrylic exterior emulsion paint (Apex) over a coat of primer after preparation of newly plastered/concrete surfaces on wall complete all as specified |
| 50 | M&L for applying two coats of weather proof exterior emulsion paint (Apex) after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed |
| 51 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls complete all as specified and directed |
| 52 | M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and directed |
| 53 | M&L for mild steel TMT bars 06mm to 08mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 54 | M&L pre-polished Baroda green marble 14 -16 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 55 | M& L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. |
| 56 | S&f factory made single extruded WPC (wood polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K valve 58-60 (Suspension Grade ) , calcium carbonate and natural fibers (wood powder/rice husk, wheat husk ) and non toxic additives (maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with & including SS butt hinges of 100mm size with necessary full body threaded star headed counter sunk SS screws complete all as specified and as directed by Engr-in Charge. |
| 57 | S&F 200mm long stainless steel barrel tower bolts all as specified |
| 58 | S&F 150mm size stainless steel handles all as specified |
| 59 | S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate |
| 60 | Excavation in post hole (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil |
| 61 | S&F compound girder and stanchions lattice girder ,aerial mask ,staging for water tanks and the like including caps bases splices etc build up from two or more beam or channel section or angles section or anglewith plates ,inc ,all lattice bars stiffners gusset plates etc. complete all as specified and directed |
| 62 | M&L for cement concrete 1:3:6 type C2 (Using 40mm graded stone agrregate ) as in foundation of posts, railing and similar work complete all as specified and directed. |
| 63 | M&L for applying two coat of synthetic enamel paint on steel surfaces inc primer of any description over 10cm width or girth not otherwise described and complete all as specified and directed by Engr-in-Charge |
| 64 | S&F triple layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed |
| 65 | S&F vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified |
| 66 | S&F vitreous china wash down water closed pan (Pedestal pattern) white , including connection to drain (or out going pipe) and to flush pipe, antisyphonic (excluding flushing cistern and flush pipe) |
| 67 | S&F vitreous china white wash hand basin OVAL SHAPE of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified |
| 68 | S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. |
| 69 | M&L 100mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed |
| 70 | M&L 75mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed |
| 71 | S&F cast iron 'P' or 'S' Traps 100mm bore complete all as specified and directed. |
| 72 | S&F 100mm bore cast iron bends or tee (any radius ), diminishing pieces or tapers fitted with oval acceess doors complete all as specified and directed. |
| 73 | S&F Cast iron cowls 100mm complete all as specified and directed |
| 74 | S&F 75mm bore cast iron bends or tee (any radius ), diminishing pieces or tapers fitted with oval acceess doors complete all as specified and directed. |
| 75 | S&F cast iron floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete type B1 (1:2:4) and SS gratings |
| 76 | S&F 20 mm dia brass stainless steel tubular towel rail D type 600mm long |
| 77 | S&F 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified |
| 78 | S&F 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 79 | S&F PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 80 | S&F 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed. |
| 81 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.. |
| 82 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 83 | S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified |
| 84 | S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified |
| 85 | S&F 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified |
| 86 | S&F chromium plated brass shower roses with or without swivel joints 125mm size including shower arm complete all as specified. |
| 87 | Supply and fix Brass mixer, Chromium plated 3 in 1 system with provision of both telephone shower and overhead shower complete with 115 mm long bend pipe and wall flange all as specified and as directed |
| 88 | S&F of looking mirror in required rectangular shape bevelled edge 5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washers complete as specified and all as directed by Engineer-In-Chagre |
| 89 | S&F of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed |
| 90 | M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed |
| 91 | S&F 18 mm thick with min density 600 Kg/Cum Lead Free PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed |
| 92 | S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position all as specified |
| 93 | S&F 75mm long stainless steel barrel tower bolts all as specified |
| 94 | S&F 150mm size stainless steel handles all as specified |
| 95 | Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing complete all as specified. (measured on vertical face in contact with old wall only) |
| 96 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in any type of soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc and getting out complete all as specified and directed |
| 97 | All as item No 96 above but depth exceeding 1.50 metre but not exceeding 3.00 metre and getting out in any type of soil complete all as specified and as directed. |
| 98 | M&L Cement concrete 1:4:8 type D2 (using 40mm graded aggregate) as in foundations or mass concrete complete all as specified and as directed by the Engr-in-Charge |
| 99 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed |
| 100 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping/ PCC band including necessary form work complete all as specified and directed |
| 101 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement complete all as specified |
| 102 | S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, complete all as specified and directed |
| 103 | M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed |
| 104 | M&L for returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed |
| 105 | M&L for removing excavated material (Soils) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed |
| 106 | Material and labour for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified. |
| 107 | Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified. |
| 108 | M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed (Note : Reinforcement shall be measured and paid for separately) |
| 109 | M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 110 | Material and Labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 111 | M&L for loose filling with brocken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed. |
| 112 | NOTES :-1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender