Tender For Special Repairs To Bldg No P-06 (Total 08 Qtrs) At Rc Line Under Ge (North) Bangalore
Tender Value
38.80 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
12 days left
EMD
77600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No P-06 (Total 08 Qtrs) At Rc Line Under Ge (North) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for complete etc all as specified and as directed |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 3 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 4 | Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed |
| 5 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed |
| 6 | Taking down shutter from frames of any description area exc 1.00 sqm & not exc 2.00 sqm each and refixng in same opening after easing / minor adjustment / repairs / side cutting / repairs etc complete all as specified and as directed Notes : Glass, wire cloth, butt hinges, Handle, tower bolt, sliding door bolt or any other mtrl reqd to fixing the door shutter, shall be measured and paid Sepeartely |
| 7 | Taking down Handle / Sliding door bolt/ Hasp & Staple/ Tower Bolt / piano hinges etc of any size and any description etc complete all as specified and as directed |
| 8 | M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring etc complete all as specified and as directed |
| 9 | M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed |
| 10 | M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded stone aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 11 | M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed |
| 12 | All as per item No 11 above but as in skirting / dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed |
| 13 | M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed |
| 14 | S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed. |
| 15 | M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed |
| 16 | M&L for 18 to 20mm thick Green Marbel (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including grinding the edges half round and polishing including, laid over 15mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed |
| 17 | M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed. |
| 18 | M&L for Walling of Stone Masonry squared rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 etc incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed. |
| 19 | M&L for Key pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 incl raking out joints/ pointing to masonry in single detached joints for flashing, etc complete all as specified and as directed |
| 20 | M&L for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc incl demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed. |
| 21 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 22 | M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 23 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 24 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) over 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 25 | M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating. incl taking down existing treatment incl PCC as in sunken protion of WC and removing beyond the premises of site. The following procedures to be adopted during the execution of work :-(i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (v) Cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC |
| 26 | M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 27 | M&L for screed bed 10 mm thick in CM 1:3 mixed with water proofing compound to receive roof tratement etc complete all as specified and as directed Notes: WPC shall be measured and paid seperately under relevant items |
| 28 | M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed |
| 29 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 30 | S&F Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 31 | S&F Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 32 | M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed |
| 33 | M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed |
| 34 | S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 35 | S & F in repairs 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,fixed in kitchen Cabinet or cupboards all as specified. |
| 36 | M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter Not Exc 3 sqcm cross section area all as specified and directed. |
| 37 | S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass,polished complete all as specified and as directed. |
| 38 | S & F in repairs 30 mm width of flap (when open) Continuous (piano) hinges, mild steel, bright finish or electro galvanised etc complete all as specified and as directed |
| 39 | S & F for solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 40 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 41 | S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed |
| 42 | S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed |
| 43 | S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed |
| 44 | S&F 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed |
| 45 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed |
| 46 | S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed |
| 47 | S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed |
| 48 | S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed |
| 49 | S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 50 | S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed |
| 51 | S&F Aluminium 100 mm Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed |
| 52 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmetc complete all as specified and as directed |
| 53 | S&F in repairs EWC (Ivory) with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (Make Cat no 4018 of Prayag of equivalent make of CA) |
| 54 | S & F vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl GI bracket. waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe 75 cm long complete all as specified and directed fixed in repairs |
| 55 | S&F in repairs PVC deo flushing cistern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equivalent make of CA) |
| 56 | S&F in repairs chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6808 Marcus series of Prayag or equivalent make as specified in CA) |
| 57 | S&F in repairs Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed (Cat No-6875 Marcus series of Prayag or equivalent make as specified in CA) |
| 58 | S & F in repairs 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed.(Cat No 6850 Marcus series of Prayag or equivalent make as specified in CA) |
| 59 | S & F in repairs 15 mm Sink mixture with regular spout W/M all as specified and as directed.(Cat No 6855 Marcus series of Prayag or equivalent make as specified in CA) |
| 60 | S & F in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc. (Cat No 6810 Marcus series of Prayag or equivalent make as specified in CA) |
| 61 | S&F in repairs Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-191A of Prayag or equivalent make as specified in CA) complete all as specified and directed |
| 62 | S&F in repairs Unbreakable corner shelf (3Pcs set i.e 8\\"-1, 10\\"-1 & 12\\"-1) (Cat No BEA-44A of Prayag or equivalent make as specified in CA) complete all as specified and directed |
| 63 | S&F in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction. |
| 64 | S&F in repairs 100mm (4\\") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-67 of Prayag or equivalent make as specified in CA) |
| 65 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers incl taking down old one. |
| 66 | S&F in repairs PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed. |
| 67 | S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 800mm x 600mm complete all as specified and as directed |
| 68 | S&F in repairs Towel rack Brass glossy finish complete all as specified and directed (Cat No BA-03 of Prayag or equivalent make as specified in CA) |
| 69 | S & F in repairs Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified in CA) |
| 70 | S&F in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified in CA) |
| 71 | S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified. Notes : Rate incl for cutting grooves for concealing of pipes or cutting holes into stone maosonary wall |
| 72 | S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified. |
| 73 | S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 74 | S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 75 | S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 76 | S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floor etc incl dismantling of existing pipe and fittings etc complete all as specified and directed |
| 77 | S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc incl dismantling of existing pipe and fittings etc complete all as specified and directed |
| 78 | S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floors etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed |
| 79 | S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed |
| 80 | S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 81 | S&F 110mm dia bore PVC (SWR) branch pieces, double (double Y) equal or unequal etc complete all as specified and as directed |
| 82 | S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 83 | S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed |
| 84 | S&F 75 mm dia bore PVC (SWR) branch pieces, single (single Y) equal or unequal etc complete all as specified and as directed |
| 85 | Complete removal exising treatment (External / Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed |
| 86 | M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 87 | M&L for Preparing Old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 88 | M&L for preparing newly plastered surface of ceiling and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 89 | M&L for preparing Old surface of ceiling and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 90 | M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed |
| 91 | M&L for preparation of new or ol dplastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 92 | M & L for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 93 | M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 94 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed |
| 95 | S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed |
| 96 | S&F in repairs Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA) |
| 97 | S&F in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41 of Prayag or equivalent make as specified in CA) |
| 98 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 100 mtr but not exc 1.00 Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed |
| 99 | Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.One light / fan point controlled by one switch |
| 101 | All as per item No. 100 above but forOne light point controlled by two way switch |
| 102 | All as per item No. 100 above but forOne 3 pin socket out let 5 Amps on independent board |
| 103 | All as per item No. 100 above but forOne 3 pin socket out let 5 A on same board |
| 104 | All as per item No. 100 above but forOne Bell / Buzzer Point controlled by bell push |
| 105 | Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.Note for Item No 2 & 3 :-(i) The earth wire for the points in the same circuit can be looped from point to point(ii) Earth wire shall be taken inside the conduit(iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring(iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. |
| 106 | S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. equivalent Makes & model in Havells/Phillips/CG |
| 107 | S&F LED batten suitable for indoor applications 10 Watts, 2 feet with Polycarbonate integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, equivalent Makes & model |
| 108 | S&F Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 watt LED lamp B22 base all as specified and directed by Engineer -in-Charge. |
| 109 | S&F switch piano flush type single pole one way 5amps |
| 110 | S&F switch piano flush type single pole two way 5amps |
| 111 | S&F of Ding Dong bell AC 230 volts single pole. |
| 112 | S&F of bell push flush type 5A all as specified and as directed . |
| 113 | S&F in repair of stepped type electronic fan regulator flush Switch / socket type all as specified and as directed |
| 114 | S&F in repairs of Switch socket combination 2 in 1 , 5 Amps flush type all as specified and as directed |
| 115 | S&F in repairs of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal all as specified and as directed |
| 116 | S&F in replacement of MCB SPN 240 volts 32/40 Amps complete all as specified and as directed |
| 117 | S&F in replacement of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed |
| 118 | S&F in replacement of MCB DB SPN 12 way double door type 240 volts with 200 Amps rated busbar as specified and as directed. |
| 119 | S&F Storage type water heater 25 Ltrs BEE 5 star rated complete incl steel wired pipe for hot/cold water connection for inlet and out let water etc complete all as specified and directed at site . |
| 120 | S&F in replacement of MCB DB TPN 4 way double door type 240 volts with 200 Amps rated busbar as specified and as directed. |
| 121 | S&F in replacement of MCB TPN 415 volts 10 KA 'C' 63 Amps complete all as specified and as directed |
| 122 | S&F in replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed |
| 123 | Removing of old existing and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC casing caping all as specified and as directed |
| 124 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed including dismantaling old unsv earthing.. |
| 125 | Supply and fixing in repairs 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj,T or its equivalent Makes & model |
| 126 | S&F in repairs GI Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed. |
| 127 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete including necessary core cutting arrangement for installation all as specified and directed Make:- Bajaj, Model- Bahar. |
| 128 | S&F fix exhaust fan, steel body AC single Phase. 230V of size 225mm sweep with, blades, and frame and louvers complete including necessary core cutting arrangement for installation all as specified and directed Make:- Bajaj, Model- Bahar. |
| 129 | M & L excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed. |
| 130 | M & L for returning, filling in trenches incl spreading leveling watering and well ramming in layers with hard/dense soil not exc 25 cm thick in each layer complete as specified and as directed |
| 131 | M & L for removing excavated soil to a distance not exc 1.5 mtr above the starting point complete all as specified and as directed |
| 132 | M & L for sand cushioning with a layer of M-sand 23 cm thick under and above the cable complete all as specified and as directed |
| 133 | S&L sub class 'B' burnt bricks for cable protection complete as specified as directed |
| 134 | S&L cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored,electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable legs including taking out the existing unserviceable cable for following size4 C x 25 Sqmm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender