Tender For Revival Retrofitting Preservation And Maintenance Of Ziyarat Sharief Of Baba Darvesh (Ra) At Dawar
Tender Value
1.02 Crore
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
2.05 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival Retrofitting Preservation And Maintenance Of Ziyarat Sharief Of Baba Darvesh (Ra) At Dawar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead:For thickness of tiles above 25 mm and upto 40 mm. |
| 2 | Demolishing cement concrete by manual/ mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix). |
| 3 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. |
| 4 | Dismantling wood work in frames, trusses, purlins and rafters upto 10meters span and 5 meters height including stacking the material within 50meters lead : Of sectional area 40 sqcm. and above. |
| 5 | Dismantling roofing including ridges, hips valleys and gutters etc., andstacking the material within 50 meters lead of : G.S. Sheet. |
| 6 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below. |
| 7 | Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 meters lead. |
| 8 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Upto 10 mm thick. |
| 9 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 10 | Labour for laying of dry stone soling in foundation trenches , stones avialable from demolishing stone masonry.complete job. |
| 11 | P/L of dry stone soling/2nd class sand under floors incl all costs and carriages complete. |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) using nallah aggregate incl all carriages complete job. |
| 13 | Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with: 2nd sort Cement mortar 1:6 (1 Cement : 6 coarse Sand). |
| 14 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with: Ist Sort Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level USING nallah agg.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl all carriages complete job. |
| 16 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) nallah agg. incl all carriages complete job. |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps, etc. |
| 19 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing.Incl. All carriage complete job. |
| 20 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Raised and cut pointing. |
| 21 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete 9.3.2 First class Budloo/Fir wood , |
| 22 | Skilled carpenter for available wood for trusses, purlins, posts etc incl planning , smoothening and finishing the wood, making the wood ready for polishing complete job. |
| 23 | Providing High Rib Profile coloured sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts *0.50 mm thick complete job. |
| 24 | Providing ridges or hips or valleys of width 60/30cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. Coloured O.50mm. |
| 25 | P/F of PGI Sheets with width as per site requirements incl c/o nails etc , making the shape of DOME/MINAR or like as directed by engineer incharge complete job incl priming and painting coats to match the roofin g colour.0.50mm thick sheet. |
| 26 | P/F of ornamental wooden eaves boarding(size 25x300mm) of approved design and pattern of 1st class kail wood including cost of nails, providing of melaminine polishing etc. complete in all respects. |
| 27 | Fixing of existing top of Minar incl necessary repairs complete job |
| 28 | 15mm Cement plaster on the rough side of single or half brick wall ofmix:1 : 6 ( 1 cement : 6 coarse sand).incl.all carriage complete job. |
| 29 | Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building.12.50.2 With resin bonded rock wool with density 48 kg/cum. |
| 30 | P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and putup in position in budloo wood (Ceiling Joists). including cost of necessary wooden frame work and adhesive & cost of nails etc. with necessary cornice of required size complete job. incl cost of nails /screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete).Soffits. |
| 31 | Providing and fixing of 10mm thick commercial plywood including cost of nails/ screws complete job. Incl frame work at necessary spots complete job. |
| 32 | P/F of Deodar wood Shingle roofing over wooden trusses, incl overlapping, Ridges, c/o adhesive, screws etc complte, as directed by engineer incharge. Design and pattern as approved by engineer incharge/ASI. |
| 33 | Providing and fixing of KHATAM BANDI ceiling of first class Kashmiri Local budloo wood excluding the cost of frame work which is to be paid separately, Heritage pattern and carving design to be approved by Engineer-in-charge/ASI Dawaz-dal-i-girde. |
| 34 | Heritage paper machine with Islamic calligraphy over prepared surface as per the design & pattern available at site and as per the direction of Engineer-in-charge including cost & carriage of all materials involved complete job. |
| 35 | Sand papering using machine sand paper to old wood work , making the wood work plain, smooth and finish ready for Caligraphy as directed by Engineer in charge. |
| 36 | Islamic calligraphy over prepared surface as per the design & pattern available at site and as per the direction of Engineer-in-charge including cost of engraving calligraphy involved complete job. |
| 37 | P/F of first class walnut wood framed panel work in fascia 600mm vide consisting 0f 65x30mm thick morticed and tenoned not less than 1200mm vertically, including first class walnut carved wood panels not less than 22mm thick groved inscribed in the surrounding members and shall be close fitted, all inward corners, edges of frame work shall be moulded in solid all as per directions, including melamine , complete in all respects . |
| 38 | Providing and fixing of Pinjra Kari Heritage type/ Lattice work as per approved pattern / design of 1st class Kashmiri local budloo wood complete job including Beading & necessary nails. (including cost of all material, leads, lifts and carriages etc upto site of work complete) |
| 39 | Providing and fixing of 5 mm thick clear float glass panes including Beading & necessary nails complete. |
| 40 | P/F of 12 mm thick panelling made of 1st class Budloo and walnut wood fixed in design as per the approved/available pattern and design including cost of necessary adhesive & cost of nails etc. complete job. incl cost of nails / screws . to be approved by Engineer-in-charge./ASI. |
| 41 | P/F 12mm thick , 200mm wide piergo wooden flooring of approved quality and 25mm thick cornice with adhesive including 12mm thick ply complete job, base planks to be used from dismantled truss. |
| 42 | P/F of 14 mm thick wall paneling FINGER JOINT (T&G) fully finished & four sides planned, fungus and termite proof (seasoned moisture content 8% to 15% imported type ISO:14001 approved including fixing with head less nails and inclusive all carriages, all taxes of allied material involved complete. |
| 43 | Providing & applying of sand sealer and preparing the surface for final finish with touch wood Polishing on the sealer surface with spray gun all complete job wood touch 3 or more coats. |
| 44 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood. |
| 45 | P/F 35mm thick walnut wood carved/ designed door, including cost of the glossy polishing and heritage type handle , complete job including all fixtures like hinges etc. |
| 46 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.First class kail wood. |
| 47 | Wire Gauge Shutters. |
| 48 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.First Class kail wood CARVED . |
| 49 | P/F 4mm thick glass panes for glazing of doors and windows etc including cost of kail wood beading of required size, cuttings and wastage all complete. |
| 50 | Pinjira Kari for 2nd step of truss. |
| 51 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work. |
| 53 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed Fine chisel dressed |
| 54 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars. |
| 55 | Providing & fixing of Ornamental Deodar carved corners upto 2'-0\\" length of required size and design as per the heritage pattern/ drawing complete job & as per the directions of the Engineer-in- charge at site including priming & paint (mat finish) with all carriages upto site of work complete in all respects. |
| 56 | P/F of 12mm thick heavy duty Ornamental hardware items incl cost necessary screws etc.Tower bolts 100mm |
| 57 | Handle 125mm. |
| 58 | I Hook 125mm. |
| 59 | Tower bolts 200mm |
| 60 | Handle 200mm. |
| 61 | Ornamental L-Drop. |
| 62 | Providing and fixing of ornamental type vertical posts (Kandoori) of first class Kashmiri deodar wood of approved pattern and design including providing and applying two or more coats of Pu wood polishing with base sand sealer etc. complete in all respects (size 9”x9” dia. & height upto 10’.0”) with required fastners and steel plates/ bolts including all carriages by mechanical transport upto site of work complete in all respects. For Front Poarch. |
| 63 | Manufacturing supplying and fixing stainless steel overhead signage boards made up of 2mm thick Stainless steel sheet as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 and fixing the same to the plate of structural frame work of stainless steel by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including S.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 64 | Engraving letters over Stainless steel plate with laser technology including all geometrical features with Logos complete job as per the sample to be provided by the Engineer-in-charge (engraving to be done in English/ Hindi & Urdu). |
| 65 | Carriage of stones from source to site work lead upto 15km. |
| 66 | Skilled carpanter for refixing of existing heritage doors,incl.repair alteration and addations of heights if required as per design and pattern on existing doors. |
| 67 | Public amenity block at GurezPlate form cutting for trench cutting and layout incl removing of big boulders etc complete job. |
| 68 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 69 | P/L, of dry stone soling duly hand packed with ramming, dressing, watering all inclusive leads, lifts, loading, un-loading, cost and carriage of material. |
| 70 | P/L, in position cement concrete of specified grade excluding the cost of centering & shuttering. All work up to floor V- level in 1:4:8 (1cement: 4 coarse, sand: 8 graded stone) aggregate of 40 mm Nominal size (nallah).incl.all carriage complete job. |
| 71 | P/L, in position cement concrete of specified grade excluding the cost of centering & shuttering. All work up to plinth- level in 1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate of 20 mm Nominal size (nallah).incl.all carriage complete job. |
| 72 | Providing and laying in position specified grade of reinforced cement concrete In 1:1.5:3 mix including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 20 mm nallah agg. all works upto plinth level.incl.all carriage complete job. |
| 73 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 mix with 20 mm nominal nallah stone agg.incl.all carriage complete job. |
| 74 | Brick work with F.P.S bricks of class designation 75 in cement mortar 1:6 (1 cement: 6 coarse sand). up-to floor V level including cost and carriage of all the materials invovled. |
| 75 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 76 | Centering and shuttering incld. strutting propping etc. and removal of form work for Foundations, footings, bases of columns, Grid beam, plinth beam, plinth, Floor Beam, columns, Suspended floors, stair, edges of the slab etc complete. |
| 77 | Reinforcement for R.C.C work incld straightening, cutting, bending, placing in position and binding all complete:- (Thermo Mechanically Treated Bars.) |
| 78 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position Imported wood. |
| 79 | Providing and fixing of 35mm thick paneled shutters for doors incl. butt hinges & cost of panels Imported wood. |
| 80 | P/F of laminated particle boards for door panels 10mm thick incl beading complete job. |
| 81 | Providing and fixing if 35mm thick wire gauge shutters using galvanized MS wire gauge of average width for doors and windows incl.MS butt hinges & necessary beadings complete imported wood |
| 82 | 12 mm thick cement plaster in walls/ceiling in 1:6mix (1 cement 6 course sand) including cost and carriage of material complete. |
| 83 | 12mm Cement plaster finished with a floating coat of neat cement of mix1 : 4 ( 1 cement : 4 fine sand).incl.all carriage complete job. |
| 84 | Supply/Filling of sand/rbm under floors incl. Water compacting and dressing all leads, lifts and carriage complete. |
| 85 | Providing and fixing 3.5mm thick glass panes of approved make including wooden beading of required size and section with necessary nails et. Complete |
| 86 | Structural Steel work welded in built up section, trusses and framed work in trusses, purlins, rafters,posts,post plates, angles channels or like components including cutting, hosting, fixing in position and applying a priming coat of approved steel primer complete. |
| 87 | Providing and fixing hi-rib colour coated G.S sheet roofing 0.50mm thick fixed, self trapping screws with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm dia. With bitumen and G.I limpet washers or with G.1 limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(upto a pitch of 60 degree) excluding the cost of purlins, rafters and trusses. |
| 88 | 50mm cement concrete flooring in 1:2:4 (1 cement: 2coarse sand: 4 graded stone agg., 20mm nominal size finished with a floating coat of neat cement slurry all inclusive leads, lifts, loading, un-loading, head load, cost and carriage of materials from approved nearest sources to site of work complete. |
| 89 | Painting with synthetic enamel paint on wood/Steel works of approved brand and manufacture of required colour to give an even shade two or more coats On new work complete job. |
| 90 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 91 | Provision for hardware fittings for doors and windows of approved brand and required cover, shade and pattern complete.L drop 300mm Lock type |
| 92 | Tower bolt150mm. |
| 93 | Tower bolt100mm |
| 94 | Handle 150mm |
| 95 | Handle 100mm |
| 96 | Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement:3 course sand:6 graded stone agg. 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand incl. finishing the top smooth. (nallah).Complete job. |
| 97 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size 600mm x 1200 mm as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Incl. all carriage complete job. 2X4 Tiles. |
| 98 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) with 1:4:8 mix (1 cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size).inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design incl. CI plate cover |
| 99 | Providing and laying Ceramic glazed anti skid floor tiles 600x600mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 100 | Providing and fixing wash basin with pedestal making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm |
| 101 | Providing and fixing CP Angle valve of 15mm dia with CP cap |
| 102 | Providing and fixing 25 mm PPR Pipe B class with all fittings & fixtures |
| 103 | Providing and fixing 40 mm PPR Pipe B class with all fittings & fixtures |
| 104 | Providing and fixing PVC pipe 3\\" with all fixtures |
| 105 | Providing and fixing PVC pipe 4\\" with all fixtures |
| 106 | Providing and fixing CP Wall mixer of cera,hindware or approved make and shape. |
| 107 | Providing and fixing 50 Lts Geyser of approved quality or venus,hindware, jaquar |
| 108 | providing and fixing S.S square 6\\"x6\\" push to open floor grating, anti foul of approved brand CP jali |
| 109 | Providing and fixing mirror of superior glass of 5mm thick. |
| 110 | Providing and fixing of cp connection 600mm |
| 111 | providing and fixing of waste pipe |
| 112 | Providing and fixing Cpbib cock of cera,hindware or approved make and shape. |
| 113 | providing and fixing of Towel rod 600 mm |
| 114 | providing and fixing of Health fauset of approved brand jaquar, |
| 115 | P/F of piller mixer of approved brand and manufacture . |
| 116 | Providing and fixing white China ware one piece western european type W.C of ceramic material of specified size with dual flushing cistern of capacity 10 ltr and PVC flush pipe ete with soft close seat cover slow motion seat cover of size 64.5cmx36cmx75cm with s-trap 110mm and good to walls and floor all complete job of brand Jaquar brand |
| 117 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredWhite vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 118 | Dry random rubble masonry with hard stone in foundation and plinth incuding cost and carraige of stones complete job. |
| 119 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, Granite of any colour or shade Area of slab over 0.5 sqm) 18mm thick |
| 120 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 121 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 122 | Carraige of bricks from 160 km |
| 123 | ElectrificationWiring for light point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/ Anchor/eq. standard make as desired by engineer incharge) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Legrand Mylinc /SSK NV/Schneider Livia /ABB Tvisha make), modular plate, suitable GI box,and earthing the point with 1.5sqmm.FRLS insulated copper conductor single core cable etc.as required. |
| 124 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/Anchor/ equivalent as directed by engineer incharge), single core cable in surface/recessed medium class PVC conduit. |
| 125 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A, 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Levia Crabtree athena make). |
| 126 | Wiring for lighting circuits/ 6- 10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Finolex/Anchor/ equivalent as directed by engineer incharge ), single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 127 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Livia /ABB Tvisha make.) |
| 128 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/Schneider Livia /ABB Tvisha make.) |
| 129 | Wiring for circuit/ Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, Conduit (Havells/Polveab/Eq.Make) singlr core Cable in surface/Recessed medium class PVC conduit as required..2x1.5 sq.mm+ 1x1.5 sq.mm earth wire. |
| 130 | 2x6 sq.mm+ 1x6 sq.mm earth wire. |
| 131 | 2x10 sq.mm+ 1x6 sq.mm earth wire. |
| 132 | Supplying and fixing of following sizes of medium class PVC conduit(Anchor/Ravindra/Eq.make)along with accessories in surface/recess incl.cutting the wall and making good the same in case of recessed conduit as required with cement plaster wall putty paint complete.25mm |
| 133 | Providing and fixing of 6-16 Cu thimles duly cramped at cable ends. |
| 134 | Supply and fixing modular blanking plate on the existing modular plate and swith box excluding modular plate as required |
| 135 | Supplying and fixing testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc/SSK NV/Schneider livia/Crabtree athena make. |
| 136 | Supply/Installation/Testing and Commissioning of 18W + LED Surface/recess squre or round mounted light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70,. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of /Havells/Wipro/Halonix/Eq Make.as approved before installation. |
| 137 | S/F testing and comm.of 20Watt 4ft wall mounted LED batten with powered coated aluminum housing and integrated electronic driver with THD<10%(commercial seried)phillips/Trulux/wipro/Havell make/eq.standard make as directed by engineer incharge. |
| 138 | Supply/Installation/Testing and Commissioning of 6 W + LED Surface/recess squre or round mounted light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70,. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of /Havells/Wipro/Halonix/Eq Make.as approved before installation. |
| 139 | Supply, installation,Testing and Commissiong of 1200mm sweep,ceiling fan with 3 No.Aluminium bleads,30 cm long down rod,2 nos.canopies,shackle kit,power factor not less than 0.90,service value incl.safety pin,nut bolts,washers,temperature rise=75 degree C (max).insulation resistance more than 2 mega ohm,suitable for 230 V, 50 Hz and incl. Iron hook complete.USHA/orient/Cromption make sample to be approved before installation) |
| 140 | Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/legrand Mylinc/ABB Tivsha/schneider livia/ Havell Coral make |
| 141 | Supply installation testing and comm.of 200mm-250mm sweep excust fan steel body of havell/USHA/Crompton/equlvalent make as directed by engineer incharge,including making of space in wall/window as per site requirement and necessary connections. |
| 142 | Supplying and fixing following way,Triple pole and neutral sheet steel,MCB distribution board,(legrand/Shinder/Hager make)240V,on surface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnection,power painted incl.earthing etc.as required(but without MCB/BCCB/Isolator.8 way(4+18) Double door. |
| 143 | S/F testing and comm. Of MCBs 10 K Of the below mentioned capacities in sub main controls legrand C curve/Schinder/ABB/equivalent make as directed by engineer incharge.6-32 Amp SP MCP |
| 144 | 40-63 Amp DP MCB |
| 145 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode, 80 mm dia. connecting the plate with main control board by 8–10 SWG G.I wire with 1/2\\" dia. Full thread brass nut and bolt and washers, Refilling of pit with 2 bags of chemical compound. |
| 146 | S/L, testing and commissioning of PVC XLPE insulated aluminium un-armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments, Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.25 sq.mm 2 core |
| 147 | Supply installation testing and comm. of flood light 50 W (warm, white ). Ероху powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management. sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1. IP66, IK 07.. with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC.lower THD. toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection. Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per 15 15885 Part-2 Sec 13. IEC60598-1. Preferred make: Philips Havell Wipro make the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 148 | Supply installation testing and commissioning of Flexible waterproof with IP68 rating, Silicon made, LED Rope light 6 Watt per meter, 4000 lm/Mt, 72 LEDs per Mtr, Color : Warm White/Yellow, along with accessories in surface, using high brightness SMD LED as the light source suitable for decorative lighting along with suitable LED driver for providing power supply to the LED strip. Preferred make : Philips/Havells/Crompton make. |
| 149 | Supply installation testing and comm. of inverter battery 150 AH/12 V Exide invatubular/eq. standard make as directed by engineer incharge. |
| 150 | Supply installation testing and commissioning of Sine Wave Inverter Capacity 1400VA + (Plus), supporting 2 batteries, 24 Month Warranty Safe for sensitive appliances with Sine wave output, Auto over-load handling capacity installation and maintenance friendly Offers high quality and reliable power back up solution for office and homes, MCB for protection from Input mains, Bypass switch for supplying output directly from grid in case of Home UPS fault. Noiseless Operations with the help of low harmonic distortion, Intuitive Display to easily understand status of mains availability, battery status, etc. Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge etc. Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life by around 70%. Supports a wide battery range, i.e. Flat Plate, Tubular & VRLA (SMF), preferred make Luminous/Microtek/Exide. The job also includes 1 No. trolley for housing 2 No batteries and inverter, 4 KVA automatic voltage stabilizer for providing power supply to inverter system. |
| 151 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel, floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. (As per approved design, size may vary as per site requirement). |
| 152 | Providing and fixing of following protection equipments and other allied accessories including connections, Inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.Normal Incoming: 125A 2P MCB 10 KA Legrand/Shnider/Siemens/ABB make |
| 153 | 2 No. of Aluminium Bus Bar of 200 Amp. |
| 154 | Digital meters and phase indicators – 1 set. |
| 155 | OUTGOING: 40–63 Amp DP MCB |
| 156 | Space for 6 way MCB's. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender