Tender For Construction Of Hostels For Students Of Government Aryurvedic Medical College Akhnoor Jammu By Way Of Construction Of Warden Residence / Accomodation For Guest Of Girls Hostel ( On Ssr 2012)
Tender Value
38.53 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
15 days left
EMD
77060
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Hostels For Students Of Government Aryurvedic Medical College Akhnoor Jammu By Way Of Construction Of Warden Residence / Accomodation For Guest Of Girls Hostel ( On Ssr 2012)
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in all kinds of soil excavation by mechanical means(hydraulic excavator) in trenches for foundation, drains, pipes, cable etc. (not exceeding 1.5 M in width) and for shafts,wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposal earth is to be levelled and neatly dressed, within a lead of 50 meters. |
| 2 | Extra for every additional lift of 1.5 M or part therefore in all kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying DPC 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and curing complete. |
| 8 | Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 9 | Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 fine sand). |
| 10 | Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:6 (1 cement : 6 fine sand). |
| 11 | Extra for brick work in super structure above plinth level upto floor V-level. |
| 12 | Half brick masonry with bricks of class designation 75 in foundation, plinth and superstructure upto floor V-level in cement mortar 1:4 (1 cement : 4 coarse sand). |
| 13 | Extra for half brick work in super structure above plinth level upto floor V-level. |
| 14 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars. |
| 15 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 16 | 12mm cement plaster of mix 1:6 (1 cement : 6 fine sand). |
| 17 | Making of grove 12mm x 10mm between brick and RCC. |
| 18 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50Mt & lift upto 1.50M. |
| 19 | Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. |
| 20 | Add or deduct for plaster drip coarse / groove in plastered surface of moulding to RCC projections. |
| 21 | Making plinth protection 50mm thick cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed. |
| 22 | Brick edging 7 cm wide 11.4cm deep to plinth protection with bricks of class designation 75mm including grouting with cement mortar 1:4 (1 cement : 4 fine sand). |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form work for :- |
| 24 | Foundations, footings, bases of columns. |
| 25 | Columns, pillars, piers. |
| 26 | Lintels, beams, plinth beams. |
| 27 | Suspended floors, roofs, landings and access platforms. |
| 28 | Weather shade, chajjas, corbels etc. including edges. |
| 29 | Stairs (excluding landings) except spiral stair cases. |
| 30 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 mtr. of part thereof (Plan area to be measured). Suspended floors, roofs landing, beams and balconies (Plan area to be measured). |
| 31 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size below flooring, retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing. |
| 32 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 33 | Providing and laying water proofing treatment (Make Armocreate of SWC Chryso France) to vertical and horizontal surface of depressed portions of W.C., kitchen and the consisting of (i) Ist course of applying cement slurry @ 4.4 kg /sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding of junctions of vertical and horizontal surface. (ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surface. (iii) III course of applying blown or / residual bitumen applied hot at 1.7 kg per sqm of area. (iv) Ivth course of 400 micron thick PVC sheet (Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm. |
| 34 | Providing and laying glossy finished full-body vitrified premium quality floor tiles of 60x60cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make of Somany, Kajaria, NITCO and Orient make in colours and shade Ethnic-Berlinetta White, Crown White, Dacia White, Dacia Green, Dacia Pink, Dacia Ivory, Dacia Grey, Dacia Brown, Dacia Pearl, Dezzling White, Evalia, S&P Grey, S&P Brown, Ultra White, Haze Grey and Border of Royale- Crown Mint, Crown Pink, Crown Snow, Micra Brown and Radiant- Lawrence Gold, Lawrence Bianco, Lawrence Grigio, Lawernce Moka, Lawrence Jaisalmer, Nuvro Brown, Nuvaro Mocha, Nuvaro Grey, Nauvaro Nero, Nuvaro Crema, Nuvaro Bianco, Nuvaro Beige laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with matching Epoxy etc. complete. |
| 35 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarsesand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 36 | Providing and laying 16mm thick Granite of any colour and shape (area of slab upto 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. |
| 37 | Extra for providing edge moulding to 18mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. |
| 38 | Extra for providing opening of required size and shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble / stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
| 39 | Providing and fixing ceramic glazed floor tiles (non-skidding) 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS : 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. |
| 40 | Providing and fixing Ist quality ceramic glazed Wall tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer in charge over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 41 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) sal wood |
| 42 | Providing & fixing glazed shutters 35mm thick for doors, windows and clear story windows using 10Kg/Sqm (4mm thick) glass panes including stainless steel but hinges of size 75mm x 62mm x 2mm of make Kitch, Arch, Blum with necessary stainless screws in second class deodar wood. |
| 43 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauge of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws in second class deodar wood. |
| 44 | Providing and fixing of glass panes weighing 13.75 kg/sqm (5.5mm thick) with deodar wood fillets. |
| 45 | Providing and fixing ISI marked 35mm flush door shutters conforming ti IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters including ISI marked M.S pressed bright finished butt hinges with necessary screws of required size |
| 46 | Providing and fixing aluminium tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. |
| 47 | 150x10mm. |
| 48 | 200x10mm. |
| 49 | Providing and fixing aluminium handles ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. |
| 50 | 125mm. |
| 51 | 100mm. |
| 52 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes of 110mm diameter. |
| 53 | Providing and fixing on wall face unplasticised-PVC moulded fitting / accessories for unplasticised- rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion :- |
| 54 | Coupler 110mm. |
| 55 | Single tee with door 110 x 110 x 110mm. |
| 56 | Bend 87.5* 110mm. |
| 57 | Providing and fixing aluminium sliding door bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 300x16mm. |
| 58 | Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 59 | Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper. |
| 60 | Applying priming coat with ready mixed pink or grey of primer of approved brand and manufacture on wood work (hard and soft wood). |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new work (Wood work). |
| 62 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (two or more coats) on new steel work. |
| 63 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S Tube |
| 64 | Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approve steel primer all complete (fixed to openings/wooden frames with rawl plugs, screws etc.). |
| 65 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacture,over the plasterted wall surface to prepare the surface even and smooth complete |
| 66 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 67 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 68 | Distampering with first quality acrylic washable distemper (ready made) of approved manufacture and of required shade/colour complete as per manufacturer's specification (two or more coats on new work) |
| 69 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. |
| 70 | Sand for an average lead of 5 Kms . |
| 71 | Stone aggregate below 40mm size for an average lead of 5 Kms. |
| 72 | Stone aggregate 40mm and above 40mm size for an average lead of 5 Kms. |
| 73 | Bricks for an average lead of 5 Kms . |
| 74 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) (Essel Cat No-76031011 / Kerovit Cat No- KS112 / CERA CAT NO- S1053121) with seat and lid, 10 liter low level white P.V.C. flushing cistern (Essel Cat No- 402101 / Kervoit Cat No- KO1005 / CERA CAT NO- B1010110), including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 75 | Providing & fixing of white vitreous china wash basin with alto half pedestal (ESSEL Cat No. 72001190-72021010/ KEROVIT CAT NO- KS215 / CERA CAT NO-S2040174-S2090136 ) with CP brass waste assembly, CP cast brass bottle trap with extension piece , 450mm long CP copper connections pipes , wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 76 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.11.1 Kitchen sink with drain board 18.11.1.1 510x1040mm bowl depth 250mm (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 77 | Providing and fixing, testing and commissioning of C.P brass Sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanges complete as required and making good as per direction of Engineer-in-charge (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 78 | Providing and fixing CP Brass Single lever telephonic wall mixer (Essel Cat No 113067-307001 / Kerovit Cat No.KB411020-KA510002 & CERA CAT NO- F1020403-F7030101AB) of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 79 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 80 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 19.16.1 100 mm diameter (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 81 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 82 | Providing and fixing 15 mm nominal bore C.P. brass angle valve (Essel Cat No 113052, Kerovit Cat No- KB2111003 & CERA CAT NO- F1023201) for basin mixer and geyser points or wherever required as per the direction of Engineer Incharge of approved make conforming to IS : 8931. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 83 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.(MAKE:- Kerovit, Essel, CERA, Hindware) |
| 84 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (MAKE:- Kerovit, Essel, CERA Hindware) |
| 85 | Providing & fixing C.P. hand spray with lever control (health faucet) (ESSEL CAT NO- 309004, Kerovit CAT NO- KA580007 & CERA CAT NO- F8030106AB) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer-Incharge. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 86 | Providing and fixing CP Brass 32mm size Bottle Trap (ESSEL CAT NO- 301307, KERVIT CAT NO- KA870001 & CERA CAT NO- F8060404AB) of approved quality & make and as per the direction of Engineer-in-charge. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 87 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 18.28.1 Semi rigid pipe 18.28.1.1 32 mm dia (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 88 | Providing and fixing CP BRASS Waste Coupling (ESEEL CAT NO- 301302-F, KEROVIT CAT NO- KA870004 & CERA CAT NO- F8050101) for wash basin and sink, of approved quality and colour: 18.69.1 Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. (MAKE:- Kerovit, Essel, CERA Hindware) |
| 89 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 90 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 18.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 91 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 92 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.or wherever required as per the direction of Engineer Incharge. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 93 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 94 | Providing and fixing Plane floor trap with heavy class SS grating and setting in floor with cement mortar to match the floor finish as per direction of Engineer-in-charge (size 100 X 75mm mm dia) ISI marked. (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 95 | Providing, storing, handling, shifting, installation, testing & commissioning of vertical / horizontal storage type hot water heater fixed to wall with anchor bolts & nuts, 20mm CP brass cock and 20mm non return valve complete including making connection with 15 mm dia CP connecting pipe on Inlet and Outlet, suitable length of power cable and 15A plough (for pantry & Toilets). |
| 96 | Capacity 10 liters |
| 97 | Capacity 25 liters |
| 98 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing 18.32.2 Rectangular shape 453x357 mm (MAKE:- Kerovit, Essel, CERA, Hindware) |
| 99 | Providing and fixing of Polyethylene/Aluminium/Polyethylene (PE-AL-PE) Composite Pipes as per IAPMO IGC- INDIA 308, UMC-1TM certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplers Connectors, clamps at one meter spacing, with PAP valves etc. Make Kitec , Maithilee and Vista. Concealed installation including cutting chases and making good in the wall etc, Complete in all respect.(Internal Work) |
| 100 | 1216 (16mm OD) pipe. |
| 101 | 1620 (20mm OD) pipe. |
| 102 | Providing and fixing Polyethelene-Aluminium–Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IAPMO-IGC-INDIA 308. U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature upto 80 0C, including all special fittings of composite material (engineering plastic blend and and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connector etc. with trenching, refilling and testing of joints complete as per direction of the Engineer-in-charge. External work. |
| 103 | 1216 (16mm OD) pipe. |
| 104 | 1620 (20mm OD) pipe. |
| 105 | 2025 (25mm OP) pipe. |
| 106 | 2532 (32mm OP) pipe. |
| 107 | 3240 (40mm OP) pipe. |
| 108 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete copatable to connection with composite pipe make :Rehau / Kitech/gebbrat ) |
| 109 | 15 mm nominal bore |
| 110 | 20 mm nominal bore |
| 111 | 25 mm nominal bore |
| 112 | Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screwed ended) make :Rehau / Kitech/gebbrat ) |
| 113 | 32 mm dia. Nominal bore |
| 114 | 40 mm dia. Nominal bore |
| 115 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:(C-Class) |
| 116 | 25 mm dia. nominal bore (Medium) |
| 117 | 32 mm dia. nominal bore (Medium) |
| 118 | 40 mm dia. nominal bore(Medium) |
| 119 | Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc.(:External work) |
| 120 | 32 mm dia. nominal bore (Medium) |
| 121 | 40 mm dia. nominal bore(Medium) |
| 122 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete |
| 123 | 25 to 40 mm nominal bore |
| 124 | Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm. |
| 125 | 15 mm dia |
| 126 | 20 mm dia |
| 127 | Providing and fixing in position of approved quality high pressure rated Brass Float Valve with copper ball float and brass rods of required length suitable for test pressure of not less than 15 Kg/sqcm of the following sizes: |
| 128 | 40 mm dia |
| 129 | Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed. |
| 130 | Providing and fixing un-plasticised PVC pipe clips of approved design to un-plasticised un-plasticised rain water pipes by mean of 50X50X50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (Make Astral, jain, Prince etc) |
| 131 | 75MM pipe |
| 132 | 110MM pipe |
| 133 | 160MM pipe |
| 134 | Construction brick measonery man hole in cement motor 1:4 (1 cement: 4 Coarse Sand) R.C.C top slab with 1:2:4 mix (1 cement: 2 Coarse Sand: 4 graded stone aggrigate 20 mm nominal size) foundation concrete aggrigate 40 mm Nominal Size, in side palstering 12mm thick with cement mortor 1:3 (1 cement:3 Coarse sand) finshed with floating coat near cement and making channels in cement concrete 1:2:4 (1 cement:2 Coarse snad:4 graded stone aggirgate 20mm nominal size) finished with floating coat of neat cement complete as per standard design. inside size 90cmx80cm and 45cm deep including cast iron cover with frame (light duty) 455x610mm internal dimensionals. total wt. of cover and frame to be not less than 38kg (wt. of cover 33kg and wt.of frame 15kg) with F.P.S bricks of class designation 75 (crush stone aggrigate) |
| 135 | Constructing masonry Chamber 60 x 60 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. (With F.P.S. bricks) |
| 136 | Providing murum bedding below pipeline and filling on the top of the pipeline with selected material in 15 to 20 cm layers including watering ramming etc. complete. With selected earth available from excavation. |
| 137 | Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge. (Size 100 mm dia) (ISI Marked) |
| 138 | Providing and fixing heavy class SS grating plane including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge (Size 100 mm dia) (ISI Marked) |
| 139 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) |
| 140 | Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks. |
| 141 | Supply, assembly, erection, testing and commissioning of pumping system comprising the following: Vertical/Horizontal centrifugal pumps with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, Single phase, 50 cycles A.C. supply with 80/ 80 mm dia. pressure gauges including MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) (Make:- Crompton,Wilo, Ebara and Matherplatt etc.) Model MBQ32(1PH)-15, Capacity 3 H.P, Suction -80mm x Delivery 80mm (Domestic water relift pump). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender