Tender For Construction Of 04 Nos F Type Staff Quarter G Plus 1 For Rwss Division Staff Bhadrak
Tender Value
73.63 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
9 days left
EMD
73631
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 04 Nos F Type Staff Quarter G Plus 1 For Rwss Division Staff Bhadrak
BOQ
| Sl. No. | Item Description |
| 1 | PART-I :-(Ground Floor :-Earth work in excavation in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rocks and boulders requiring blasting including dressing the leveling the bed up to the required level and depositing the excavated earth away from the site with all leads & lifts including shuttering etc complete in all respect as directed by the Engineer in charge. |
| 2 | Supplying filling in foundation and floor bed concrete with clean coarse river sand including watering and ramming with cost & conveyance of all materials, labours, & T & P all taxes royalty etc complete in all respect as per direction of engineer in charge. (measurement will be taken for finished compacted section only). |
| 3 | PCC (1:3:6) ( IS –2571) in floor bed concrete using 40 mm & below size b.h.c.b granite stone metal of approved quality from approved quarry including lowering laying concrete watering ramming &curing etc compacting to required level laid in layers not exceeding 4’’ thick including cost conveyance all taxes royalty &cost of all material & labours T&P required for the works etc complete in all respects as per the direction of Engineer in Charge. |
| 4 | Providing bored compacting pile foundation with R.C.C M-20 using 20mm size B. H. G (C.B) chips including cost of bore holes but excluding cost of M.S. rod or Tor steel and labour charges for cutting bending binding etc. complete |
| 5 | RCC ( 1:1½ :3) M-20 having crushing strength of 200 kg/cm2 after 28 days curing as per (IS 456-2000 & IS 516) using 12mm to 20 mm size b.h.c.b granite chips 20mm size not exceeding 25% including hoisting lowering laying concrete and compacting by using vibrators watering curing for 28 days centering shuttering &finishing the exposed surface smooth providing grooves beads when ever necessary including cost convince taxes & royalty of all materials & cost of all labour T&P hire charges of concrete mixture machine & vibrator machine required for the work etc. complete in all respect but excluding the cost of M S rod or tor steel & binding wires & labour charges for cutting bending, binding & tying the grills. As per the direction of Engineer in charge. (a)Pile Cap |
| 6 | col. Foundation |
| 7 | Col. s/s |
| 8 | sill band |
| 9 | lintel |
| 10 | Grade Beam |
| 11 | Roof Slab |
| 12 | stair case (landing) |
| 13 | Cutting straightening of steel HYSD (Fe-500 ) TMT conforming to (IS- 1786)) with bending, binding, cranking, hooking, welding or joining if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering & laying steels including cost conveyance taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges (payment will be made on weight of MS rod or tersteel only basing on the co-efficient of MS rod or for steel bars approved by SAIL/ TATA/ competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage coupling welded, joints, spacer bars, chairs stays, hangers and annealed steel wires or other methods for binding and placing etc. |
| 14 | Flyash brick masonry work ( IS –2212) in cm (1:6) with flyash brick of size (10''X5''X3'') having minimum crushing strength not less than 75 kg /cm2 with dimensional tolerance+ 2% after immersing the bricks for six hour in water before use in superstructure including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge.(a) |
| 15 | Superstructure |
| 16 | 16 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 17 | 12 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 18 | 6 mm thick ceiling plaster (IS – 9103) in cement mortar (1:4) to ceiling surface including watering curing with cost conveyance taxes & royalties of all materials &cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 19 | providing fitting fixing ceramic tile flooring with cost conveyance taxes & royalties of all materials &cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 20 | Providing fitting fixing Vetrified tile flooring ( 600 mm x600 mm ) with cost conveyance taxes & royalties of all materials &cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 21 | Providing fixing vertified tiles in dados, skirting and riser of steps on 12mm thick bed of cement mortar 1:3 jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost of all. |
| 22 | Providing fixing ceramic wall tiles of size (1'x2') in wall, treads or steps and landing on 12mm thick bed of c:m (1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles etc. |
| 23 | Painting two coats with approved ASIAN weather seal exterior grade paints of approved colour, hade pn wall surface over a coat of wall primer water bound including sand papering, polishing the surface , cost, conveyences,taxes of all mateials and cost. |
| 24 | Providing a coat of primer with wall putty with cost conveyance taxes & royalties of all materials & cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 25 | Wall painting two coats with Plastic emulsion paint of approved shade on new work to give an ever shade including cost of all materials, labour T&P sundries |
| 26 | Supplying fitting fixing M.S grill including cost of all respects T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 27 | Providing fitting and fixing F.R.P choukaths for door and windows including cost of all materials and T&P required for the work etc complete. |
| 28 | providing for supply, fitting,fixing of A.I Door section no 9209 as vertical member, 9201 as top, 9200 as bottom and middle memberwith frame section as 9221 with tappered clip no-4660 & the frame to be completed by mens of jointing angle no-1885 as shutter frame with laminated board including all fitting with cost of all materials, labours & T&P etc. complete.(a)Main Door,-D1 & D-2 |
| 29 | Door-3 |
| 30 | Providing for supplying, fitting fixing fully glazed UPVC framed openable windows using 15 micron anodized aluminum section 2082 as out section9139,asmullion section4124 as a shutter section frame with tapered clip of section 4125, aluminum angle,rubber bending,friction stay and handle as shutter frame with 5mm thick biack glass as panel fitted including all fitting with cost of all materials,labours &T&P etc complete. |
| 31 | Providing,fitting& fixing of Stainless steel of 304 grade in hand railling using 50 mm dia. of 2 mm thick circular pipe with Balustrrade of size 32 mmx 32 mm x2 mm @0.90 mtr C/C and stainless square pipe bracing of size 32 mmx 32 mm x2 mm in three rows in stair case as per approved designs and specification, buffing , polishing etc.with cost of all materials,labours &T&P etc complete. |
| 32 | Painting three coats (IS – 2395), two coats with Synthetic enamel paint of approved shade & make over base coat of primer to wood work & iron work in all floors including sand papering , polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge. |
| 33 | PART-II:- 1st (First) Floor :_RCC ( 1:1½ :3) M-20 having crushing strength of 200 kg/cm2 after 28 days curing as per (IS 456-2000 & IS 516) using 12mm to 20 mm size b.h.c.b granite chips 20mm size not exceeding 25% including hoisting lowering laying concrete and compacting by using vibrators watering curing for 28 days centering shuttering &finishing the exposed surface smooth providing grooves beads when ever necessary including cost convince taxes & royalty of all materials & cost of all labour T&P hire charges of concrete mixture machine & vibrator machine required for the work etc. complete in all respect but excluding the cost of M S rod or tor steel & binding wires & labour charges for cutting bending, binding & tying the grills. As per the direction of Engineer in charge.(A)Column Structure |
| 34 | sill band |
| 35 | lintel |
| 36 | Roof Slab |
| 37 | (l)stair case (landing) |
| 38 | Cutting straightening of steel HYSD (Fe-415) conforming to (IS- 1786)) with bending, binding, cranking, hooking, welding or joining if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering & laying steels including cost conveyance taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges (payment will be made on weight of MS rod or tersteel only basing on the co-efficient of MS rod or for steel bars approved by SAIL/ TATA/ competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage coupling welded, joints, spacer bars, chairs stays, hangers and annealed steel wires or other methods for binding and placing etc. |
| 39 | Flyash brick masonry work ( IS –2212) in cm (1:6) with flyash brick of size (10''X5''X3'') having minimum crushing strength not less than 75 kg /cm2 with dimensional tolerance+ 2% after immersing the bricks for six hour in water before use in superstructure including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge. |
| 40 | 16 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 41 | 12 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 42 | 6 mm thick ceiling plaster (IS – 9103) in cement mortar (1:4) to ceiling surface including watering curing with cost conveyance taxes & royalties of all materials &cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 43 | providing fitting fixing ceramic tile flooring with cost conveyance taxes & royalties of all materials &cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 44 | Providing fitting fixing Vetrified tile flooring ( 600 mm x600 mm ) with cost conveyance taxes & royalties of all materials &cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 45 | Providing fixing vertified tiles in dados, skirting and riser of steps on 12mm thick bed of cement mortar 1:3 jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost of all. |
| 46 | Providing fixing ceramic wall tiles of size (1'x2') in wall, treads or steps and landing on 12mm thick bed of c:m (1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles etc. |
| 47 | Painting two coats with approved ASIAN weather seal exterior grade paints of approved colour, hade pn wall surface over a coat of wall primer water bound including sand papering, polishing the surface , cost, conveyences,taxes of all mateials and cost. |
| 48 | Providing a coat of primer with wall putty with cost conveyance taxes & royalties of all materials & cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 49 | Wall painting two coats with Plastic emulsion paint of approved shade on new work to give an ever shade including cost of all materials, labour T&P sundries |
| 50 | Supplying fitting fixing M.S grill including cost of all respects T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 51 | Providing fitting and fixing F.R.P choukaths for door and windows including cost of all materials and T&P required for the work etc complete. |
| 52 | providing for supply, fitting,fixing of A.I Door section no 9209 as vertical member, 9201 as top, 9200 as bottom and middle memberwith frame section as 9221 with tappered clip no-4660 & the frame to be completed by mens of jointing angle no-1885 as shutter frame with laminated board including all fitting with cost of all materials, labours & T&P etc. complete.(a)Main Door,D-1 & D-2 |
| 53 | Door-3 |
| 54 | Providing for supplying, fitting fixing fully glazed UPVC framed openable windows using 15 micron anodized aluminum section 2082 as out section9139,asmullion section4124 as a shutter section frame with tapered clip of section 4125, aluminum angle,rubber bending,friction stay and handle as shutter frame with 5mm thick biack glass as panel fitted including all fitting with cost of all materials,labours &T&P etc complete. |
| 55 | Providing,fitting& fixing of Stainless steel of 304 grade in hand railling using 50 mm dia. of 2 mm thick circular pipe with Balustrrade of size 32 mmx 32 mm x2 mm @0.90 mtr C/C and stainless square pipe bracing of size 32 mmx 32 mm x2 mm in three rows in stair case as per approved designs and specification, buffing , polishing etc.with cost of all materials,labours &T&P etc complete. |
| 56 | Painting three coats (Window)(IS – 2395), two coats with Synthetic enamel paint of approved shade & make over base coat of primer to wood work & iron work in all floors including sand papering , polishing the surface with cost ,conveyance , taxes of all materials ,labour, T&P brush& scaffolding charges etc . required for the work complete in all respect (paints & primer of Berger / Asian / JHONSON & Nicolson/Nerolac) as per the direction of Engineer in charge. |
| 57 | PART-III -(Head Room)-RCC ( 1:1½ :3) M-20 having crushing strength of 200 kg/cm2 after 28 days curing as per (IS 456-2000 & IS 516) using 12mm to 20 mm size b.h.c.b granite chips 20mm size not exceeding 25% including hoisting lowering laying concrete and compacting by using vibrators watering curing for 28 days centering shuttering &finishing the exposed surface smooth providing grooves beads when ever necessary including cost convince taxes & royalty of all materials & cost of all labour T&P hire charges of concrete mixture machine & vibrator machine required for the work etc. complete in all respect but excluding the cost of M S rod or tor steel & binding wires & labour charges for cutting bending, binding & tying the grills. As per the direction of Engineer in charge.(a)Column |
| 58 | Ventilator |
| 59 | Cutting straightening of steel HYSD (Fe-415) conforming to (IS- 1786)) with bending, binding, cranking, hooking, welding or joining if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering & laying steels including cost conveyance taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges (payment will be made on weight of MS rod or tersteel only basing on the co-efficient of MS rod or for steel bars approved by SAIL/ TATA/ competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage coupling welded, joints, spacer bars, chairs stays, hangers and annealed steel wires or other methods for binding and placing etc. |
| 60 | Flyash brick masonry work ( IS –2212) in cm (1:6) with flyash brick of size (10''X5''X3'') having minimum crushing strength not less than 75 kg /cm2 with dimensional tolerance+ 2% after immersing the bricks for six hour in water before use in superstructure including splays cutting & circular molding hoisting watering curing etc with cost conveyance taxes royalty of all materials & cost of all labours T&P for the work in all respect as per the direction of Engineer in charge. |
| 61 | 16 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 62 | 12 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 63 | Painting two coats with approved ASIAN weather seal exterior grade paints of approved colour, hade pn wall surface over a coat of wall primer water bound including sand papering, polishing the surface , cost, conveyences,taxes of all mateials and cost. |
| 64 | Providing a coat of primer with wall putty with cost conveyance taxes & royalties of all materials & cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 65 | Wall painting two coats with Plastic emulsion paint of approved shade on new work to give an ever shade including cost of all materials, labour T&P sundries |
| 66 | providing for supply, fitting,fixing of A.I Door section no 9209 as vertical member, 9201 as top, 9200 as bottom and middle memberwith frame section as 9221 with tappered clip no-4660 & the frame to be completed by mens of jointing angle no-1885 as shutter frame with laminated board including all fitting with cost of all materials, labours & T&P etc. complete |
| 67 | Providing for fixing G.C.I Sheet in roof drilling holes in wind ties including fixing of ridges valleys wind ties etc. |
| 68 | Labour for fitting and fixing G.C.I sheet for rafter and fallin .(a)1.5\\"G.C.I pipe |
| 69 | 2\\"G.C.I pipe |
| 70 | PART-IV ) WATER SUPPLY & SANITATION ( PH WORK FOR GROUND FLOOR & 1ST FLOOR ) -Supplying of all materials , labour , T&P for fitting & fixing of ISI marked star labelled single phase submersible 1.00 HP pump & motor set ( KSB/Kirloskar / Crompton/ Texmo/CRI make ) having duty of discharge of 1.00 lps and 40 mtr Head including all accessories etc all complete as per the direction of Engineer-in-charge. |
| 71 | Supplying of all materials , labour , T&P for Providing and fixing Rotational Moulded Polyethylene Cylindrical Vertical water storage tanksconforming to IS:12701-1998 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts , fixing ball valves etc. including hoisting upto a height of 5.00 mtrs above ground level and placing the tank in the required position etc. all complete as per the direction of Engineer-in-charge.1000 Ltrs Rotational Double Layer Cylindrical vertical water storage tank |
| 72 | Supplying of all materials , labour , T&P for construction of parapet wall around the PVC vertical water storage tank on the roof etc all complete as per the direction of Engineer-in charge. |
| 73 | Supplying of all materials , labour , T&P for Providing and fixing to wall or ceiling and floor Chlorinated Polyvinyle Chloride (CPVC) pipes conforming to IS:15778 having thermal stability for hot & cold water supply including all CPVC plain and brass threaded threaded fittings including fixing the pipe with clamps at 1.00 mtr spacing and joining of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.50 mm nominal diameter |
| 74 | 25 mm nominal diameter |
| 75 | 20 mm nominal diameter |
| 76 | Supplying of all materials , labour , T&P for fixing of Brass screw-down Bib cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc all complete as per the direction of Engineer-in-charge.15 mm dia CP long body Bib cock |
| 77 | 15 mm dia CP Swan Neck pillar cock with spout |
| 78 | 15 mm dia CP angular stop cock |
| 79 | Supplying of all materials , labour , T&P for fixing of Brass screw-down stop cocks conforming to IS:781-1995 of the following nominal sizes as per specification etc all complete as per the direction of Engineer-in-charge.20 mm dia CP consealed stop cock |
| 80 | 20 mm dia CP revolving shower with arm(over head) |
| 81 | CP Telephonic shower with CP/PVC Flexible Tube with hook |
| 82 | Supplying of all materials , labour , T&P for fixing of Brass or Gun metal Full way valves conforming to IS:781-1995 of the following nominal sizes as per specification etc all complete as per the direction of Engineer-in-charge.20 mm dia Brass or Gun metal Full way valves |
| 83 | 25 mm dia Brass or Gun metal Full way valves |
| 84 | 50 mm dia Brass or Gun metal Full way valves |
| 85 | Supplying of all materials , labour , T&P for fixing of standard sized chromium plated brass Towel rail complete with chromium plated brass brakets fixed to wooden plugs with chromium plated brass screws etc. as per specification all complete as per the direction of Engineer-in-charge.20 mm dia x 600 mm Chromium plated Brass Towel rail. |
| 86 | Supplying of all materials , labour , T&P for fixing of Liquid soap container - Glass container or plastic container with chromium plated brass lid and brakets fixed to wooden plugs with chromium plated brass screws or Chromium plated brass soap dish complete with chromium plated brass brakets fixed to wooden plugs etc. as per specification all complete as per the direction of Engineer-in-charge.Liquid soap container |
| 87 | CP Soap holder |
| 88 | Supplying of all materials , labour , T&P for fixing of standard sized Glass-Shelf with chromium plated brass brakets and guard rails complete fixed to wooden plugs with chromium plated brass screws etc. as per specification all complete as per the direction of Engineer-in-charge.Fixing of Glass-Shelf |
| 89 | Supplying of all materials , labour , T&P for fixing of Rectangular shaped 1500 x 450 mm mirror of superior glass mounted on 6 mm thick AC sheet or Ply wood sheet and fixed to wooden plugs with chromium plated brass brass screws and washers as per specification all complete as per the direction of Engineer-in-charge.Fixing of 1500 x 450 mm Rectangular mirrror |
| 90 | Supplying of all materials , labour , T&P for fixing on wall face unplasticised Rigid pvc soil, waste and rain water pipes conforming to IS: 13592 Type B , including jointing with seal ring conforming to IS: 5382 , having 10 mm gap for thermal expansion, single socketed pipes etc all complete as per specification etc all complete as per the direction of Engineer-in-charge.(i) 90 mm OD PVC SWR S/S Pipe ( ISI Type - B ) |
| 91 | (ii)110 mm OD PVC SWR S/S Pipe ( ISI Type - B ) |
| 92 | Supplying of all materials , labour , T&P for fixing Wash Hand Basins with hole for pillar taps conforming to IS; 2556: part 4-2004 with cast Iron or MS brakets painted white including cutting holes in walls and making good the damages etc. all complete as per specification and direction of Engineer-in-charge.Porcelain 20\\" x 16\\" ( 550 x 400 mm )Flat back hand wash Basin |
| 93 | Supplying of all materials , labour , T&P for fixing Porcelain standard Padestal Wash Hand Basins complete recessed at the backfor the reception of pipes and fittings etc. all complete as per specification and direction of Engineer-in-charge. Porcelain standard Padestal for Wash Hand Basins |
| 94 | Supplying of all materials , labour , T&P for fixing of Wash down water Closet( European type W C pan ) with integral 'S' or 'P' trap conforming to IS: 2556 : part 8-2004 , to the floor with wooden plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification and direction of Engineer-in-charge.( Seat and cover to be measured and paid separately) Porcelain EWC with 'P' or 'S' Trap |
| 95 | Supplying of all materials , labour , T&P for fixing of Plastic Seat and cover for Wash down water Closet( European type W C pan ) with chromium plated brass hinges and rubber buffers all complete as per specification and direction of Engineer-in-charge.White plastic seat and cover with jet spray |
| 96 | Supplying of all materials , labour , T&P for fixing of PVC low level flushing cistern with manually controlled device ( Handle lever) conforming to IS: 7231, with all fittings and fixtures all complete as per specification and direction of Engineer-in-charge.10 Litres capacity white |
| 97 | Supplying of all materials , labour , T&P for fixing of Porcelain sink ( Cera/Nycer) of 24\\" x 18\\" x 10\\" ( 600 x 450 x 250 mm ) size conforming to IS:2556: Part 5-1994 with cast Iron or MS brakets painted white including cutting holes in walls and making good the damages etc. all complete as per specification and direction of Engineer-in-charge.Porcelain sink ( Cera/Nycer) of 24\\" x 18\\" x 10\\" ( 600 x 450 x 250 mm ) size |
| 98 | Supplying of all materials , labour , T&P for fixing of Porcelain Flat back stall type magnum urinal conforming to IS:2556: Part 6-1996 including connecting the urinal with waste pipe by means of white lead mixed with chopped hempo etc. all complete as per specification and direction of Engineer-in-charge.Porcelain Flat back stall type Magnum Urinal |
| 99 | Supplying of all materials , labour , T&P for cutting holes through brick work including making good the damages in cement mortar (1:6) for taking GI/PVC pipes and fittings etc all complete as per the specification and direction of Engineer-in-charge. 375mm / 250 mm thick wall |
| 100 | CONSTRUCTION OF 1 NOS 20 USERS RCC SEPTIC TANK -Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. (size-0.75x0.75x1.20m size) (Annexure-A ) |
| 101 | PART-V :-INTERNAL ELECTRIFICATION- GROUND FLOOR Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) Group-A - Light Point |
| 102 | Group-B Light Point |
| 103 | Group-B - Fan Point |
| 104 | Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required ) |
| 105 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL)2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 106 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 107 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 108 | Supply and fixing of following way single pole steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-(HPL/ Havells/ Legrand /L&T/C&S.)4 Way Double Door |
| 109 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S)Single pole (SP) |
| 110 | Supply and fixing of 25/30 W LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics,IP66 protection,impact resistance of IK07 and 10K external SPD(Make- Havells/Philips/HPL/CG) |
| 111 | S/F of 10 Watt LED Lamp as per direction of Engineer Incharge (Make-Philips, Havells) |
| 112 | Exhaust fan 10\\"/12\\" size. (Make-Havells/Usha/Almonard) |
| 113 | Standard Earthing |
| 114 | Supply and laying of 6 SWG copper wire |
| 115 | 63 Amp DP Main Switch |
| 116 | 100 AMP DG PANEL-Spply and fixing of 1 no cubicle panel of 2mm thick CRCA Pnel box of following dimension 1m x 1m x 0.co m = 1sq mtr in complete fabrication of metal clad power coated , compartmentalised cubicle panel as per CPWD Electrical specification including insulated bus bars, supports, interconnections, errection of switch gears and making provisions of incoming/outgoing cables etc. |
| 117 | 100Amp 4 pole MCCB with Thermal Release range from 80-100 Amp (L & T ) |
| 118 | 100 Amp 4 pole change over (L & T / Havels ) |
| 119 | Floor rubber mat 6\\" x 4\\" x 6mm |
| 120 | S/F Ammetter ( 0 to 500 A ) with selector switch including make - AE all accessories, make-AE |
| 121 | S/F Volt meter ( 0 to 500 A ) with selector switch including make - AE all accessories, make-AE |
| 122 | S/F of indicator lamp with toggle switch and fuse. |
| 123 | S/F of CT Coil up to 400 / 5 Amps including all connection. |
| 124 | Supply and laying of 35 sq mm 3.5 core Allm. Armoured cable |
| 125 | 63 Amp TPN Main Switch( Havels/Anchor) |
| 126 | 63 Amp Bus Bar( L&T/Havels/Anchor) |
| 127 | Supply and fixing of following way single pole steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-(HPL/ Havells/ Legrand /L&T/C&S.) 8 Way Double Door |
| 128 | PART-VI:-(1ST FLOOR) - Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) Group-A - Light point |
| 129 | Group-B Light point |
| 130 | Group-B - Fan point |
| 131 | Group-C - Calling Bell point |
| 132 | Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required ) |
| 133 | Supply and fixing of 15/16Amp plug with switch on 75X75X60 mm deep MS board (Piano type/cover including connection etc. as required ) |
| 134 | S/F of computer board consisting 3 nos 5amp switch and 3 nos. of 5 amp socket |
| 135 | S/F of A.C Point consisting of 15 Amp Industrial switch socket and 32 Amp DP Starter with 02 way MCB and Top for connection. (Make:-Cona, Anchor, Havells) |
| 136 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 137 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 138 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 139 | 2 X 10 sq.mm +1 X 4 sq.mm -do- |
| 140 | Supply and fixing of following way single pole steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-(HPL/ Havells/ Legrand /L&T/C&S.) 8 Way Double Door |
| 141 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP) |
| 142 | 20 watt LED Tube Light(HAVELLS/Crompton/Bajaj |
| 143 | Supply and fixing of 25/30 W LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics,IP66 protection,impact resistance of IK07 and 10K external SPD(Make- Havells/Philips/HPL/CG) |
| 144 | S/F of 10 Watt LED Lamp as per direction of Engineer Incharge (Make-Philips, Havells) |
| 145 | Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, on 6\\" X 4\\" conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor) |
| 146 | A.C Ceiling fan 48\\" size. (Make-Usha-Striker/Orient PSPO Summer cool Breeze) |
| 147 | Exhaust fan 10\\"/12\\" size. (Make-Havells/Usha/Almonard) |
| 148 | Supply and fixing of Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj) |
| 149 | 63 Amp TPN Main Switch( Havels/Anchor) |
| 150 | 63 Amp Bus Bar( L&T/Havels/Anchor) |
| 151 | Supply and Laying of 25 sq. mm. 3.5 cor Al lm Armoured cable (Havels/Poly Cab/Finolex/Nicco) |
| 152 | Provision for security deposit & service connection Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender